Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2016, Article ID 5780693, 8 pages
http://dx.doi.org/10.1155/2016/5780693
Research Article

Processing and Quality Evaluation of Additive Manufacturing Monolayer Specimens

1Mechanical Engineering and Industrial Design Department, University of Cadiz, Faculty of Engineering, Avenida de la Universidad de Cadiz, No. 10, Puerto Real, 11519 Cadiz, Spain
2Department of Automotive and Aeronautical Engineering, University of Applied Sciences Hamburg, Faculty of Engineering and Computer Science, Berliner Tor 21, 20099 Hamburg, Germany

Received 19 January 2016; Revised 31 March 2016; Accepted 20 April 2016

Academic Editor: Ying Li

Copyright © 2016 Christiane Wendt et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Christiane Wendt, Severo Raúl Fernández-Vidal, Álvaro Gómez-Parra, Moisés Batista, and Mariano Marcos, “Processing and Quality Evaluation of Additive Manufacturing Monolayer Specimens,” Advances in Materials Science and Engineering, vol. 2016, Article ID 5780693, 8 pages, 2016. https://doi.org/10.1155/2016/5780693.