Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2016, Article ID 5780693, 8 pages
http://dx.doi.org/10.1155/2016/5780693
Research Article

Processing and Quality Evaluation of Additive Manufacturing Monolayer Specimens

1Mechanical Engineering and Industrial Design Department, University of Cadiz, Faculty of Engineering, Avenida de la Universidad de Cadiz, No. 10, Puerto Real, 11519 Cadiz, Spain
2Department of Automotive and Aeronautical Engineering, University of Applied Sciences Hamburg, Faculty of Engineering and Computer Science, Berliner Tor 21, 20099 Hamburg, Germany

Received 19 January 2016; Revised 31 March 2016; Accepted 20 April 2016

Academic Editor: Ying Li

Copyright © 2016 Christiane Wendt et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. Wohler's Associates, Wohlers Report 2015: 3D Printing and Additive Manufacturing State of the Industry Annual Worldwide Progress Report, Wohler's Associates, Fort Collins, Colo, USA, 2015.
  2. M. Hashmi, Ed., Comprehensive Materials Processing, Elsevier, Oxford, UK, 2014.
  3. J. Kranz, D. Herzog, and C. Emmelmann, “Design guidelines for laser additive manufacturing of lightweight structures in TiAl6V4,” Journal of Laser Applications, vol. 27, no. 1, Article ID S14001, 2015. View at Publisher · View at Google Scholar · View at Scopus
  4. A. Gebhardt, Understanding Additive Manufacturing, Carl Hanser Verlag, Munich, Germany, 2011.
  5. American Society of Testing and Materials ASTM, “Standard Terminology for Additive Manufacturing Technologies,” ASTM F2792-12a, 2009. View at Google Scholar
  6. S.-H. Ahn, M. Montero, D. Odell, S. Roundy, and P. K. Wright, “Anisotropic material properties of fused deposition modeling ABS,” Rapid Prototyping Journal, vol. 8, no. 4, pp. 248–257, 2002. View at Publisher · View at Google Scholar · View at Scopus
  7. C. S. Lee, S. G. Kim, H. J. Kim, and S. H. Ahn, “Measurement of anisotropic compressive strength of rapid prototyping parts,” Journal of Materials Processing Technology, vol. 187-188, pp. 627–630, 2007. View at Publisher · View at Google Scholar · View at Scopus
  8. Y. Zhu, X. Tian, J. Li, and H. Wang, “The anisotropy of laser melting deposition additive manufacturing Ti–6.5Al–3.5Mo–1.5Zr–0.3Si titanium alloy,” Materials & Design, vol. 67, no. 1, pp. 538–542, 2015. View at Publisher · View at Google Scholar
  9. A. Bellini and S. Güçeri, “Mechanical characterization of parts fabricated using fused deposition modeling,” Rapid Prototyping Journal, vol. 9, no. 4, pp. 252–264, 2003. View at Publisher · View at Google Scholar · View at Scopus
  10. F. Feenstra, “Road map for additive manufacturing 2014 (SASAM project FP7–NMP–2012-CSA-6-319167),” 2015, http://cordis.europa.eu/docs/results/319167/periodic1-sasam-standardisation-roadmap-open-febr-2014.pdf.
  11. K. K. Jurrens, “Standards for the rapid prototyping industry,” Rapid Prototyping Journal, vol. 5, no. 4, pp. 169–178, 1999. View at Publisher · View at Google Scholar · View at Scopus
  12. M. D. Monzón, Z. Ortega, A. Martínez, and F. Ortega, “Standardization in additive manufacturing: activities carried out by international organizations and projects,” The International Journal of Advanced Manufacturing Technology, vol. 76, no. 5, pp. 1111–1121, 2014. View at Publisher · View at Google Scholar · View at Scopus
  13. American Society for Testing and Materials (ASTM), Committee F42 on Additive Manufacturing Technologies, 2015, http://www.astm.org/COMMITTEE/F42.htm.
  14. International Organization for Standardization ISO, “ISO/TC 261 Additive manufacturing,” 2015, http://www.iso.org/iso/iso_technical_committee?Commid=629086.
  15. M. Bertoldi, M. A. Yardimci, C. M. Pistor, S. I. GUyeri, and G. Sala, “Mechanical characterization of parts processed via fused deposition,” Materials & Design, vol. 31, no. 1, pp. 287–295, 1998. View at Google Scholar
  16. J. F. Rodríguez, J. P. Thomas, and J. E. Renaud, “Mechanical behavior of acrylonitrile butadiene styrene (ABS) fused deposition materials. Experimental investigation,” Rapid Prototyping Journal, vol. 7, no. 3, pp. 148–158, 2001. View at Publisher · View at Google Scholar · View at Scopus
  17. A. Mohanty, M. Misra, and L. Drzal, Eds., Natural Fibers, Biopolymers, and Biocomposites, CRC Press, Boca Raton, Fla, USA, 2005.
  18. T. Yamamura, M. Omiya, T. Sakai, and P. Viot, “Evaluation of compressive properties of PLA/PBAT polymer blends,” in Proceedings of the Asian Pacific Conference for Materials and Mechanics, Yokohama, Japan, November 2009.
  19. F. Signori, M.-B. Coltelli, and S. Bronco, “Thermal degradation of poly(lactic acid) (PLA) and poly(butylene adipate-co-terephthalate) (PBAT) and their blends upon melt processing,” Polymer Degradation and Stability, vol. 94, no. 1, pp. 74–82, 2009. View at Publisher · View at Google Scholar · View at Scopus
  20. K. Szykiedans and W. Credo, “Mechanical properties of FDM and SLA low-cost 3-D prints,” Procedia Engineering, vol. 136, pp. 257–262, 2016. View at Publisher · View at Google Scholar
  21. L. R. Meza and J. R. Greer, “Mechanical characterization of hollow ceramic nanolattices,” Journal of Materials Science, vol. 49, no. 6, pp. 2496–2508, 2014. View at Publisher · View at Google Scholar · View at Scopus