Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2016, Article ID 6264317, 9 pages
http://dx.doi.org/10.1155/2016/6264317
Research Article

The Effect of Morphological Characteristic of Coarse Aggregates Measured with Fractal Dimension on Asphalt Mixture’s High-Temperature Performance

1School of Highway, Chang’an University, Xi’an, Shaanxi 710064, China
2Department of Civil and Environmental Engineering, Michigan Technological University, 1400 Townsend Drive, Houghton, MI 49931-1295, USA

Received 17 November 2015; Accepted 3 February 2016

Academic Editor: Luigi Nicolais

Copyright © 2016 Hainian Wang et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. Y. Liu, Z. You, Q. Dai, and J. Mills-Beale, “Review of advances in understanding impacts of mix composition characteristics on asphalt concrete (AC) mechanics,” International Journal of Pavement Engineering, vol. 12, no. 4, pp. 385–405, 2011. View at Publisher · View at Google Scholar
  2. M. Tokyay and T. Akcaoglu, “Determining aggregate size & shape effect on concrete microcracking under compression by means of a degree of reversibility method,” in Proceedings of the 11th International Conference on Fracture (ICF11 '05), vol. 2, pp. 1357–1362, Turin, Italy, March 2005.
  3. AASHTO, Standard Specifications for Transportation Materials and Methods of Sampling and Testing, T304, AASHTO Bookstore, 2015.
  4. I. Ishai and H. Gellber, “Effect of geometric irregularity of aggregates on the properties and behavior of asphalt concrete,” Journal of Association of Asphalt Paving Technologists, vol. 51, pp. 494–521, 1982. View at Google Scholar
  5. C. Chandan, K. Sivakumar, T. Fletcher, and E. Masad, “Application of imaging techniques to geometry analysis of aggregate particles,” Journal of Computing in Civil Engineering, vol. 18, no. 1, pp. 75–82, 2004. View at Publisher · View at Google Scholar · View at Scopus
  6. C. Browne, F. A. Rauch, T. C. Haas, and H. Kim, “Comparison tests of automated equipment for analyzing aggregate gradation,” in Proceedings of the 9th Annual Symposium of the International Center for Aggregates Research (ICAR '11), Austin, Tex, USA, 2011.
  7. C. Rao, E. Tutumluer, and I. T. Kim, “Quantification of coarse aggregate angularity based on image analysis,” Transportation Research Record, no. 1787, pp. 117–124, 2002. View at Google Scholar · View at Scopus
  8. E. Masad, “The development of a computer controlled image analysis system for measuring aggregate shape properties,” National Cooperative Highway Research Program NCHRP-IDEA Project 77 Final Report, Transportation Research Board, National Research Council, 2003. View at Google Scholar
  9. L. Wang, W. Sun, E. M. Lally, and A. Wang, “Application of LADAR in the analysis of aggregate characteristics,” National Cooperative Highway Research Program Report 724, Transportation Research Board, National Research Council, 2012. View at Google Scholar
  10. W. D. Fei, W. G. Chu, and D. Z. Yang, “Fractal characteristic of the microstructure in Alnico8,” Journal of Materials Science Letters, vol. 19, no. 14, pp. 1221–1223, 2000. View at Publisher · View at Google Scholar · View at Scopus
  11. A. G. Kokkalis, G. H. Tsohos, and O. K. Panagouli, “Consideration of fractals potential in pavement skid resistance evaluation,” Journal of Transportation Engineering, vol. 128, no. 6, pp. 591–595, 2002. View at Publisher · View at Google Scholar · View at Scopus
  12. H. Wang, Y. Bu, D. Wang, and M. Oeser, “3D characterisation of the grain sphericity and angularity with the aid of computed tomography,” Bauingenieur, vol. 90, pp. 436–443, 2015. View at Google Scholar
  13. J. Zhang, Z. Fan, K. Fang, J. Pei, and L. Xu, “Development and validation of nonlinear viscoelastic damage (NLVED) model for three-stage permanent deformation of asphalt concrete,” Construction and Building Materials, vol. 102, no. 1, pp. 384–392, 2016. View at Publisher · View at Google Scholar
  14. K. Sasajima and T. Tsukada, “Measurement of fractal dimension from surface asperity profile,” International Journal of Machine Tools and Manufacture, vol. 32, no. 1-2, pp. 125–127, 1992. View at Publisher · View at Google Scholar · View at Scopus
  15. A. Topal and B. Sengoz, “Determination of fine aggregate angularity in relation with the resistance to rutting of hot-mix asphalt,” Construction and Building Materials, vol. 19, no. 2, pp. 155–163, 2005. View at Publisher · View at Google Scholar · View at Scopus
  16. X. Ji, N. Zheng, Y. Hou, and S. Niu, “Application of asphalt mixture shear strength to evaluate pavement rutting with accelerated loading facility (ALF),” Construction and Building Materials, vol. 41, pp. 1–8, 2013. View at Publisher · View at Google Scholar · View at Scopus
  17. Y.-F. Bi and L.-J. Sun, “Research on test method of asphalt mixture's shearing properties,” Journal of Tongji University, vol. 33, no. 8, pp. 1036–1040, 2005 (Chinese). View at Google Scholar · View at Scopus
  18. J. E. Stephens and K. C. Sinha, “Effect of aggregate shape on bituminous mix characteristic,” Association of Asphalt Paving Technologists, vol. 47, pp. 434–456, 1978. View at Google Scholar