Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2016, Article ID 6375131, 10 pages
http://dx.doi.org/10.1155/2016/6375131
Research Article

Experimental and Numerical Investigations of Fretting Fatigue Behavior for Steel Q235 Single-Lap Bolted Joints

School of Civil Engineering, Xi’an University of Architecture and Technology, Shaanxi 710055, China

Received 6 June 2016; Revised 17 August 2016; Accepted 21 August 2016

Academic Editor: Antônio G. de Lima

Copyright © 2016 Yazhou Xu et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. T. N. Chakherlou, R. H. Oskouei, and J. Vogwell, “Experimental and numerical investigation of the effect of clamping force on the fatigue behaviour of bolted plates,” Engineering Failure Analysis, vol. 15, no. 5, pp. 563–574, 2008. View at Publisher · View at Google Scholar · View at Scopus
  2. H. Lee, S. Mall, and H. Soyama, “Fretting fatigue behavior of cavitation shotless peened Ti–6Al–4V,” Tribology Letters, vol. 36, no. 2, pp. 89–94, 2009. View at Publisher · View at Google Scholar · View at Scopus
  3. T. N. Chakherlou, Y. Alvandi-Tabrizi, and A. Kiani, “On the fatigue behavior of cold expanded fastener holes subjected to bolt tightening,” International Journal of Fatigue, vol. 33, no. 6, pp. 800–810, 2011. View at Publisher · View at Google Scholar · View at Scopus
  4. T. N. Chakherlou, M. J. Razavi, A. B. Aghdam, and B. Abazadeh, “An experimental investigation of the bolt clamping force and friction effect on the fatigue behavior of aluminum alloy 2024-T3 double shear lap joint,” Materials & Design, vol. 32, no. 8-9, pp. 4641–4649, 2011. View at Publisher · View at Google Scholar · View at Scopus
  5. F. Esmaeili, T. N. Chakherlou, and M. Zehsaz, “Investigation of bolt clamping force on the fatigue life of double lap simple bolted and hybrid (bolted/bonded) joints via experimental and numerical analysis,” Engineering Failure Analysis, vol. 45, pp. 406–420, 2014. View at Publisher · View at Google Scholar · View at Scopus
  6. M. A. Rahmat, R. N. Ibrahim, and R. H. Oskouei, “A study on the combined effect of notch and fretting on the fatigue life behaviour of Al 7075-T6,” Materials & Design, vol. 60, no. 8, pp. 136–145, 2014. View at Publisher · View at Google Scholar · View at Scopus
  7. R. Starikov, “Fatigue behaviour of mechanically fastened aluminium joints tested in spectrum loading,” International Journal of Fatigue, vol. 26, no. 10, pp. 1115–1127, 2004. View at Publisher · View at Google Scholar · View at Scopus
  8. T. D. Hoang, C. Herbelot, and A. Imad, “On failure mode analysis in a bolted single lap joint under tension-shearing,” Engineering Failure Analysis, vol. 24, no. 5, pp. 9–25, 2012. View at Publisher · View at Google Scholar · View at Scopus
  9. S.-H. Ju, C.-Y. Fan, and G. H. Wu, “Three-dimensional finite elements of steel bolted connections,” Engineering Structures, vol. 26, no. 3, pp. 403–413, 2004. View at Publisher · View at Google Scholar · View at Scopus
  10. A. Benhamena, A. Talha, N. Benseddiq, A. Amrouche, G. Mesmacque, and M. Benguediab, “Effect of clamping force on fretting fatigue behaviour of bolted assemblies: case of couple steel–aluminium,” Materials Science and Engineering A, vol. 527, no. 23, pp. 6413–6421, 2010. View at Publisher · View at Google Scholar · View at Scopus
  11. J. T. Maximov, G. V. Duncheva, and N. Ganev, “Enhancement of fatigue life of net section in fitted bolt connections,” Journal of Constructional Steel Research, vol. 74, no. 6, pp. 37–48, 2012. View at Publisher · View at Google Scholar · View at Scopus
  12. J. Liu, J. X. Kang, W. Z. Yan, F. S. Wang, and Z. F. Yue, “Prediction of fatigue performance of fastener holes with bolt clamping force based on critical plane approach,” Materials Science and Engineering A, vol. 527, no. 15, pp. 3510–3514, 2010. View at Publisher · View at Google Scholar · View at Scopus
  13. J. W. Hobbs, R. L. Burguete, P. F. Heyes, and E. A. Patterson, “The effect of eccentric loading on the fatigue performance of high-tensile bolts,” International Journal of Fatigue, vol. 22, no. 6, pp. 531–538, 2000. View at Publisher · View at Google Scholar · View at Scopus
  14. R. Hojjati-Talemi, M. A. Wahab, E. Giner, and M. Sabsabi, “Numerical estimation of fretting fatigue lifetime using damage and fracture mechanics,” Tribology Letters, vol. 52, no. 1, pp. 11–25, 2013. View at Publisher · View at Google Scholar · View at Scopus
  15. R. H. Oskouei and R. N. Ibrahim, “Improving fretting fatigue behaviour of Al 7075-T6 bolted plates using electroless Ni-P coatings,” International Journal of Fatigue, vol. 44, pp. 157–167, 2012. View at Publisher · View at Google Scholar · View at Scopus
  16. M. A. Rahmat, R. N. Ibrahim, and R. H. Oskouei, “A stress-based approach to analyse fretting fatigue life behaviour of electroless Ni–P coated Al 7075-T6,” Materials Science and Engineering A, vol. 631, pp. 126–138, 2015. View at Publisher · View at Google Scholar · View at Scopus
  17. R. H. Oskouei, M. R. Barati, and R. N. Ibrahim, “Surface characterizations of fretting fatigue damage in aluminum alloy 7075-T6 clamped joints: the beneficial role of Ni–P coatings,” Materials, vol. 9, no. 3, article 141, 2016. View at Publisher · View at Google Scholar
  18. JGJ82-91, Design, construction and acceptance specification for high strength bolt connection of steel structure, 1991.
  19. GB-50017, “Code for design for steel structure,” 2003.
  20. M. Keikhosravy, R. H. Oskouei, P. Soltani, A. Atas, and C. Soutis, “Effect of geometric parameters on the stress distribution in Al 2024-T3 single-lap bolted joints,” International Journal of Structural Integrity, vol. 3, no. 1, pp. 79–93, 2012. View at Publisher · View at Google Scholar · View at Scopus
  21. K. Fallahnezhad, A. Steele, and R. H. Oskouei, “Failure mode analysis of aluminium alloy 2024-T3 in double-lap bolted joints with single and double fasteners; a numerical and experimental study,” Materials, vol. 8, no. 6, pp. 3195–3209, 2015. View at Publisher · View at Google Scholar · View at Scopus
  22. C. Ruiz, P. H. B. Boddington, and K. C. Chen, “An investigation of fatigue and fretting in a dovetail joint,” Experimental Mechanics, vol. 24, no. 3, pp. 208–217, 1984. View at Publisher · View at Google Scholar · View at Scopus