Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2016, Article ID 6429160, 8 pages
http://dx.doi.org/10.1155/2016/6429160
Research Article

Multiobjective Optimization of Turning Cutting Parameters for J-Steel Material

1Department of Mechanical Engineering, King Saud University, P.O. Box 800, Riyadh 11421, Saudi Arabia
2Department of Mechanical Engineering, University of Michigan, Ann Arbor, MI 48105, USA
3Department of Mechanical Design, American University in Cairo, New Cairo, Cairo 11835, Egypt

Received 11 January 2016; Revised 20 March 2016; Accepted 23 March 2016

Academic Editor: Wenbin Yi

Copyright © 2016 Adel T. Abbas et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. V. N. Gaitonde, S. R. Karnik, L. Figueira, and J. Paulo-Davim, “Machinability investigations in hard turning of AISI D2 cold work tool steel with conventional and wiper ceramic inserts,” International Journal of Refractory Metals & Hard Materials, vol. 27, no. 4, pp. 754–763, 2009. View at Publisher · View at Google Scholar · View at Scopus
  2. A. K. Sahoo, A. N. Baral, A. K. Rout, and B. C. Routra, “Multi-objective optimization and predictive modeling of surface roughness and material removal rate in turning using grey relational and regression analysis,” Procedia Engineering, vol. 38, pp. 1606–1627, 2012. View at Publisher · View at Google Scholar
  3. A. Srithar, K. Palanikumar, and B. Durgaprasad, “Experimental investigation and surface roughness analysis on hard turning of AISI D2 steel using coated carbide insert,” Procedia Engineering, vol. 97, pp. 72–77, 2014. View at Publisher · View at Google Scholar
  4. R. Suresh, S. Basavarajappa, V. N. Gaitonde, G. L. Samuel, and J. P. Davim, “State-of-the-art research in machinability of hardened steels,” Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, vol. 227, no. 2, pp. 191–209, 2013. View at Publisher · View at Google Scholar · View at Scopus
  5. D. R. Jones, M. Schonlau, and W. J. Welch, “Efficient global optimization of expensive black-box functions,” Journal of Global Optimization, vol. 13, no. 4, pp. 455–492, 1998. View at Publisher · View at Google Scholar · View at Scopus
  6. M. J. Sasena, P. Papalambros, and P. Goovaerts, “Exploration of metamodeling sampling criteria for constrained global optimization,” Engineering Optimization, vol. 34, no. 3, pp. 263–278, 2002. View at Publisher · View at Google Scholar · View at Scopus
  7. M. J. Sasena, M. Parkinson, M. P. Reed, P. Y. Papalambros, and P. Goovaerts, “Improving an ergonomics testing procedure via approximation based adaptive experimental design,” Journal of Mechanical Design, vol. 127, no. 5, pp. 1006–1013, 2005. View at Publisher · View at Google Scholar · View at Scopus
  8. Y. Ren and P. Y. Papalambros, “Design preference elicitation using efficient global optimization,” in Proceedings of the ASME 2011 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (IDETC/CIE '11), pp. 591–600, Washington, Wash, USA, August 2011. View at Publisher · View at Google Scholar · View at Scopus
  9. J. Knowles, “ParEGO: a hybrid algorithm with on-line landscape approximation for expensive multiobjective optimization problems,” IEEE Transactions on Evolutionary Computation, vol. 10, no. 1, pp. 50–66, 2006. View at Publisher · View at Google Scholar · View at Scopus
  10. M. Aly, K. Hamza, M. Tauhiduzzaman et al., “Multi-objective selection of cutting conditions in advanced machining processes via an efficient global optimization approach,” in Proceedings of the International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (ASME '14), Paper No. DETC2014-34624, p. 8, Buffalo, NY, USA, August 2014. View at Publisher · View at Google Scholar
  11. A. Sadek, M. Aly, K. Hamza, M. Meshreki, A. O. Nassef, and H. Attia, “Optimization of cutting conditions in vibration assisted drilling of composites via a multi-objective EGO implementation,” in Proceedings of the ASME International Design Engineering Technical Conferences (ASME IDETC '15), Paper no. DETC2015-47532, pp. 1–9, Boston, Mass, USA, 2015. View at Publisher · View at Google Scholar
  12. S. Coromant, “Turning Tools,” 2012, http://www.sandvik.coromant.com/sitecollectiondocuments/downloads/global/catalogues/en-gb/turning/turn_g.pdf.
  13. K. Deb, Multi-Objective Optimization Using Evolutionary Algorithms, John Wiley & Sons, Hoboken, NJ, USA, 2003.
  14. T. W. Simpson, A. J. Booker, D. Ghosh, A. A. Giunta, P. N. Koch, and R.-J. Yang, “Approximation methods in multidisciplinary analysis and optimization: a panel discussion,” Structural and Multidisciplinary Optimization, vol. 27, no. 5, pp. 302–313, 2004. View at Google Scholar · View at Scopus
  15. F. Viana, C. Gogu, and R. Haftka, “Making the most out of surrogate models: tricks of the trade,” in Proceedings of the ASME International Design Engineering Technical Conferences (IDETC '10), DETC2010-28064, Montreal, Canada, 2010.
  16. P. Goovaerts, Geostatistics for Natural Evaluation, Oxford University Press, New York, NY, USA, 1997.
  17. E. Zitzler, M. Laumanns, and L. Thiele, “SPEA2: improving the strength pareto evolutionary algorithm,” TIK-Report 103, Swiss Federal Institute of Technology, Zurich, Switzerland, 2001. View at Google Scholar