Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2016, Article ID 6467589, 12 pages
http://dx.doi.org/10.1155/2016/6467589
Research Article

Relationships between Imperfections and Shear Buckling Resistance in Web Plate with Sectional Damage Caused by Corrosion

1Department of Civil Engineering, Gyeongnam National University of Science and Technology, Jinju, Gyeongnam 660-758, Republic of Korea
2Department of Civil Engineering, Kyushu University, Fukuoka 819-0395, Japan
3Structural Engineering Research Institute, Korea Institute of Civil Engineering and Building Technology, Goyang, Gyeonggi 411-712, Republic of Korea
4Department of Civil Engineering, Pusan National University, Pusan 609-735, Republic of Korea

Received 10 May 2016; Accepted 16 June 2016

Academic Editor: Guillermo Rus

Copyright © 2016 Jin-Hee Ahn et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. J. R. Kayser and A. S. Nowak, “Reliability of corroded steel girder bridges,” Structural Safety, vol. 6, no. 1, pp. 53–63, 1989. View at Publisher · View at Google Scholar · View at Scopus
  2. J.-H. Ahn, S. Kainuma, F. Yasuo, and I. Takehiro, “Repair method and residual bearing strength evaluation of a locally corroded plate girder at support,” Engineering Failure Analysis, vol. 33, pp. 398–418, 2013. View at Publisher · View at Google Scholar · View at Scopus
  3. I.-T. Kim, M.-J. Lee, J.-H. Ahn, and S. Kainuma, “Experimental evaluation of shear buckling behaviors and strength of locally corroded web,” Journal of Constructional Steel Research, vol. 83, pp. 75–89, 2013. View at Publisher · View at Google Scholar · View at Scopus
  4. J.-H. Ahn, I.-T. Kim, S. Kainuma, and M.-J. Lee, “Residual shear strength of steel plate girder due to web local corrosion,” Journal of Constructional Steel Research, vol. 89, pp. 198–212, 2013. View at Publisher · View at Google Scholar · View at Scopus
  5. J.-H. Ahn, S. Kainuma, and I.-T. Kim, “Shear failure behaviors of a web panel with local corrosion depending on web boundary conditions,” Thin-Walled Structures, vol. 73, pp. 302–317, 2013. View at Publisher · View at Google Scholar · View at Scopus
  6. J. K. Paik, J. M. Lee, and M. J. Ko, “Ultimate shear strength of plate elements with pit corrosion wastage,” Thin-Walled Structures, vol. 42, no. 8, pp. 1161–1176, 2004. View at Publisher · View at Google Scholar · View at Scopus
  7. D. Ok, Y. Pu, and A. Incecik, “Computation of ultimate strength of locally corroded unstiffened plates under uniaxial compression,” Marine Structures, vol. 20, no. 1-2, pp. 100–114, 2007. View at Publisher · View at Google Scholar · View at Scopus
  8. J. E. Silva, Y. Garbatov, and C. Guedes Soares, “Ultimate strength assessment of rectangular steel plates subjected to a random localised corrosion degradation,” Engineering Structures, vol. 52, pp. 295–305, 2013. View at Publisher · View at Google Scholar · View at Scopus
  9. J. Huh, I.-T. Kim, and J.-H. Ahn, “Locally corroded stiffener effect on shear buckling behaviors of web panel in the plate girder,” Advances in Materials Science and Engineering, vol. 2015, Article ID 586264, 19 pages, 2015. View at Publisher · View at Google Scholar · View at Scopus
  10. National Institute for Land and Infrastructure Management, “Research on local corrosion of highway steel bridges,” Technical Note 294, National Institute for Land and Infrastructure Management, 2006 (Japanese).
  11. J. Murakoshi and Y. Tanaka, “Research on retrofitting for corroded steel girder around expansion joint,” Civil Engineering Research Reports, CAESAR, 2008. View at Google Scholar
  12. J.-H. Ahn, J.-H. Cheung, W.-H. Lee, H. Oh, and I.-T. Kim, “Shear buckling experiments of web panel with pitting and through-thickness corrosion damage,” Journal of Constructional Steel Research, vol. 115, pp. 290–302, 2015. View at Publisher · View at Google Scholar · View at Scopus
  13. T. E. Dunbar, N. Pegg, F. Taheri, and L. Jiang, “A computational investigation of the effects of localized corrosion on plates and stiffened panels,” Marine Structures, vol. 17, no. 5, pp. 385–402, 2004. View at Publisher · View at Google Scholar · View at Scopus
  14. M. F. Hassanein, “Imperfection analysis of austenitic stainless steel plate girders failing by shear,” Engineering Structures, vol. 32, no. 3, pp. 704–713, 2010. View at Publisher · View at Google Scholar · View at Scopus
  15. AASHTO/AWS, “Bridge welding code,” Tech. Rep. ANSI/AASHTO/AWS D1.5M/D1.5:2002, A Joint Publication of American Association of State Highway and Transportation Officials, Washington, DC, USA; American Welding Society, Miami, Fla, USA, 2002. View at Google Scholar
  16. Marc 2012 User's Guide, MSC Software Corporation, 2012.