Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2016 (2016), Article ID 7517616, 9 pages
http://dx.doi.org/10.1155/2016/7517616
Research Article

Study of the Mechanical Properties of a Nanostructured Surface Layer on 316L Stainless Steel

1School of Science, Inner Mongolia University of Technology, Hohhot 010051, China
2The Sixth Academy of China Aerospace Science & Industry Corporation, Hohhot 010050, China
3School of Civil Engineering, Inner Mongolia University of Technology, Hohhot 010051, China

Received 11 October 2015; Accepted 5 May 2016

Academic Editor: Massimiliano Barletta

Copyright © 2016 F. C. Lang et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. H. Gleiter, “Nanocrystalline materials,” Progress in Materials Science, vol. 33, pp. 223–235, 1988. View at Google Scholar
  2. K. Lu, “Nanocrystalline metals crystallized from amorphous solids: nanocrystallization, structure, and properties,” Materials Science and Engineering R: Reports, vol. 16, no. 4, pp. 161–221, 1996. View at Publisher · View at Google Scholar · View at Scopus
  3. K. Lu and J. Lu, “Surface nanocrystallization of metallic materials-presentation of the concept behind a new approach,” Journal of Materials Science and Technology, vol. 15, no. 3, pp. 193–197, 1999. View at Publisher · View at Google Scholar · View at Scopus
  4. Z. B. Wang, J. Lu, and K. Lu, “Chromizing behaviors of a low carbon steel processed by means of surface mechanical attrition treatment,” Acta Materialia, vol. 53, no. 7, pp. 2081–2089, 2005. View at Publisher · View at Google Scholar · View at Scopus
  5. N. R. Tao, Z. B. Wang, W. P. Tong, M. L. Sui, J. Lu, and K. Lu, “An investigation of surface nanocrystallization mechanism in Fe induced by surface mechanical attrition treatment,” Acta Materialia, vol. 50, no. 18, pp. 4603–4616, 2002. View at Publisher · View at Google Scholar · View at Scopus
  6. Y.-J. Mai, X.-H. Jie, L.-L. Liu, N. Yu, and X.-X. Zheng, “Thermal stability of nanocrystalline layers fabricated by surface nanocrystallization,” Applied Surface Science, vol. 256, no. 7, pp. 1972–1975, 2010. View at Publisher · View at Google Scholar · View at Scopus
  7. D. Li, H. N. Chen, and H. Xu, “The effect of nanostructured surface layer on the fatigue behaviors of a carbon steel,” Applied Surface Science, vol. 255, no. 6, pp. 3811–3816, 2009. View at Publisher · View at Google Scholar · View at Scopus
  8. G. Liu, S. C. Wang, X. F. Lou, J. Lu, and K. Lu, “Low carbon steel with nanostructured surface layer induced by high-energy shot peening,” Scripta Materialia, vol. 44, no. 8-9, pp. 1791–1795, 2001. View at Publisher · View at Google Scholar · View at Scopus
  9. N. R. Tao, M. L. Sui, J. Lu, and K. Lua, “Surface nanocrystallization of iron induced by ultrasonic shot peening,” Nanostructured Materials, vol. 11, no. 4, pp. 433–440, 1999. View at Publisher · View at Google Scholar · View at Scopus
  10. G. Liu, J. Lu, and K. Lu, “Surface nanocrystallization of 316L stainless steel induced by ultrasonic shot peening,” Materials Science and Engineering A, vol. 286, no. 1, pp. 91–95, 2000. View at Publisher · View at Google Scholar · View at Scopus
  11. X. Wu, N. Tao, Y. Hong, B. Xu, J. Lu, and K. Lu, “Microstructure and evolution of mechanically-induced ultrafine grain in surface layer of AL-alloy subjected to USSP,” Acta Materialia, vol. 50, no. 8, pp. 2075–2084, 2002. View at Publisher · View at Google Scholar · View at Scopus
  12. B. N. Mordyuk, G. I. Prokopenko, M. A. Vasylyev, and M. O. Iefimov, “Effect of structure evolution induced by ultrasonic peening on the corrosion behavior of AISI-321 stainless steel,” Materials Science and Engineering A, vol. 458, no. 1-2, pp. 253–261, 2007. View at Publisher · View at Google Scholar · View at Scopus
  13. Y. F. Al-Obaid, “Shot peening mechanics: experimental and theoretical analysis,” Mechanics of Materials, vol. 19, no. 2-3, pp. 251–260, 1995. View at Publisher · View at Google Scholar · View at Scopus
  14. M. Kobayashi, T. Matsui, and Y. Murakami, “Mechanism of creation of compressive residual stress by shot peening,” International Journal of Fatigue, vol. 20, no. 5, pp. 351–357, 1998. View at Publisher · View at Google Scholar · View at Scopus
  15. S. A. Meguid, Mechnics of shot peening [Ph.D. thesis], UMIST, Manchester, UK, 1975.
  16. S. Bagherifard, R. Ghelichi, and M. Guagliano, “A numerical model of severe shot peening (SSP) to predict the generation of a nanostructured surface layer of material,” Surface and Coatings Technology, vol. 204, no. 24, pp. 4081–4090, 2010. View at Publisher · View at Google Scholar · View at Scopus
  17. H. Y. Miao, S. Larose, C. Perron, and M. Levesque, “An analytical approach to relate shot peening parameters to Almen intensity,” Surface and Coatings Technology, vol. 205, no. 7, pp. 2055–2066, 2010. View at Publisher · View at Google Scholar · View at Scopus
  18. Y. M. Xing and J. Lu, “An experimental study of residual stress induced by ultrasonic shot peening,” Journal of Materials Processing Technology, vol. 152, no. 1, pp. 56–61, 2004. View at Publisher · View at Google Scholar · View at Scopus
  19. T. Kim, H. Lee, H. C. Hyun, and S. Jung, “A simple but effective FE model with plastic shot for evaluation of peening residual stress and its experimental validation,” Materials Science and Engineering A, vol. 528, no. 18, pp. 5945–5954, 2011. View at Publisher · View at Google Scholar · View at Scopus
  20. T. Roland, D. Retraint, K. Lu, and J. Lu, “Enhanced mechanical behavior of a nanocrystallised stainless steel and its thermal stability,” Materials Science and Engineering A, vol. 445-446, pp. 281–288, 2007. View at Publisher · View at Google Scholar · View at Scopus
  21. W. Yan, L. Fang, Z. Zheng, K. Sun, and Y. Xu, “Effect of surface nanocrystallization on abrasive wear properties in Hadfield steel,” Tribology International, vol. 42, no. 5, pp. 634–641, 2009. View at Publisher · View at Google Scholar · View at Scopus
  22. Y. Ochi, K. Masaki, T. Matsumura, and T. Sekino, “Effect of shot-peening treatment on high cycle fatigue property of ductile cast iron,” International Journal of Fatigue, vol. 23, no. 5, pp. 441–448, 2001. View at Publisher · View at Google Scholar · View at Scopus
  23. W. C. Oliver and G. M. Pharr, “Measurement of hardness and elastic modulus by instrumented indentation: advances in understanding and refinements to methodology,” Journal of Materials Research, vol. 19, no. 1, pp. 3–20, 2004. View at Publisher · View at Google Scholar · View at Scopus
  24. M. Dao, N. Chollacoop, K. J. Van Vliet, T. A. Venkatesh, and S. Suresh, “Computational modeling of the forward and reverse problems in instrumented sharp indentation,” Acta Materialia, vol. 49, no. 19, pp. 3899–3918, 2001. View at Publisher · View at Google Scholar · View at Scopus
  25. J. M. Antunes, J. V. Fernandes, L. F. Menezes, and B. M. Chaparro, “A new approach for reverse analyses in depth-sensing indentation using numerical simulation,” Acta Materialia, vol. 55, no. 1, pp. 69–81, 2007. View at Publisher · View at Google Scholar · View at Scopus
  26. W. C. Oliver and G. M. Pharr, “Improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments,” Journal of Materials Research, vol. 7, no. 6, pp. 1564–1580, 1992. View at Publisher · View at Google Scholar · View at Scopus
  27. M. Lichinchi, C. Lenardi, J. Haupt, and R. Vitali, “Simulation of Berkovich nanoindentation experiments on thin films using finite element method,” Thin Solid Films, vol. 312, no. 1-2, pp. 240–248, 1998. View at Publisher · View at Google Scholar · View at Scopus
  28. Y. Sun, T. Bell, and S. Zheng, “Finite element analysis of the critical ratio of coating thickness to indentation depth for coating property measurements by nanoindentation,” Thin Solid Films, vol. 258, no. 1-2, pp. 198–204, 1995. View at Publisher · View at Google Scholar · View at Scopus