Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2016, Article ID 8089426, 14 pages
Research Article

Safety Evaluation of a Hybrid Substructure for Offshore Wind Turbine

Structural Engineering Research Institute, Korea Institute of Civil Engineering and Building Technology, 283 Goyangdae-ro, Ilsanseo-gu, Goyang-si, Gyeonggi-do 10223, Republic of Korea

Received 18 May 2016; Accepted 26 July 2016

Academic Editor: Sung-Cheon Han

Copyright © 2016 Min-Su Park et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. M. Klose, P. Dalhoff, and K. Argyriadis, “Integrated load and strength analysis for offshore wind turbines with jacket structures,” in Proceedings of the European Offshore Wind Energy Conference and Exhibition, Berlin, Germany, December 2007.
  2. J. Weinzettel, M. Reenaas, C. Solli, and E. G. Hertwich, “Life cycle assessment of a floating offshore wind turbine,” Renewable Energy, vol. 34, no. 3, pp. 742–747, 2009. View at Publisher · View at Google Scholar · View at Scopus
  3. J. M. Jonkman, “Dynamics of offshore floating wind turbines-model development and verification,” Wind Energy, vol. 12, no. 5, pp. 459–492, 2009. View at Publisher · View at Google Scholar · View at Scopus
  4. Z. Gao, N. L. J. Saha, T. Moan, and J. Amdahl, “Dynamic analysis of offshore fixed wind turbines under wind and wave loads using alternative computer codes,” in Proceedings of the 3rd TORQUE Conference, Crete, Greece, 2010.
  5. D. Kaufer, T. Fischer, F. Vorpahl, W. Popko, and M. Kühn, “Different approaches to modeling jacket support structures and their impact on overall wind turbine dynamics,” in Proceedings of the 10th German wind Energy Conference (DEWEK '10), Bremen, Germany, 2010.
  6. E. Lozano-Minguez, A. J. Kolios, and F. P. Brennan, “Multi-criteria assessment of offshore wind turbine support structures,” Renewable Energy, vol. 36, no. 11, pp. 2831–2837, 2011. View at Publisher · View at Google Scholar · View at Scopus
  7. M. B. Zaaijer, “Comparison of monopile, tripod, suction bucket and gravity base design for a 6 MW turbine,” in Proceedings of the Offshore Wind Energy in Mediterranean and Other European Seas Conference, Naples, Italy, 2003.
  8. S. Føreland, M. O. Rastad, and K. Aas-Jacobsen, “A parametric study on fixed bottom wind turbines in the North Sea,” in Proceedings of the Nordic Steel Construction Conference, p. 831, Oslo, Norway, September 2012.
  9. M.-S. Park, Y.-J. Jeong, and Y.-J. You, “Structural analysis of a hybrid substructure with multi-cylinder for 5 MW offshore wind turbines,” in Proceedings of the ASME 33rd International Conference on Ocean, Offshore and Arctic Engineering (OMAE '14), San Francisco, Calif, USA,, June 2014. View at Publisher · View at Google Scholar · View at Scopus
  10. IEC, “Wind turbines-part 3: design requirements for offshore wind turbines,” IEC 61400-3, International Electrotechnical Commission, 2009. View at Google Scholar
  11. W. Shi, J. H. Han, C. W. Kim, D. Y. Lee, H. K. Shin, and H. C. Park, “Feasibility study of offshore wind turbine substructures for southwest offshore wind farm project in Korea,” Renewable Energy, vol. 74, pp. 406–413, 2014. View at Publisher · View at Google Scholar · View at Scopus
  12. J. G. Espinosa, “Design and calculus of the foundation structure of an offshore monopile wind turbine,” Polytechnic University of Catalonia, Barcelona, Spain, 2012.
  13. K. Hasselmann, W. Sell, D. B. Ross, and P. Müller, “A parametric wave prediction model,” Journal of Physical Oceanography, vol. 6, no. 2, pp. 200–228, 1976. View at Publisher · View at Google Scholar
  14. ISO, “Petroleum and natural gas industries—fixed steel offshore structures,” ISO 19902, International Organization for Standardization, Geneva, Switzerland, 2007. View at Google Scholar