Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2016, Article ID 8521259, 8 pages
http://dx.doi.org/10.1155/2016/8521259
Research Article

Electrospun Polyurethane/Loess Powder Hybrids and Their Absorption of Volatile Organic Compounds

Division of Mechanical Design Engineering, Chonbuk National University, 567 Baekje-daero, Jeonju-si, Jeollabuk-do 561-756, Republic of Korea

Received 21 January 2016; Revised 19 February 2016; Accepted 24 February 2016

Academic Editor: Antonio Riveiro

Copyright © 2016 Jun Cong Ge et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. Z.-M. Huang, Y.-Z. Zhang, M. Kotaki, and S. Ramakrishna, “A review on polymer nanofibers by electrospinning and their applications in nanocomposites,” Composites Science and Technology, vol. 63, no. 15, pp. 2223–2253, 2003. View at Publisher · View at Google Scholar · View at Scopus
  2. S. Ramakrishna, K. Fujihara, W.-E. Teo, T. Yong, Z. Ma, and R. Ramaseshan, “Electrospun nanofibers: solving global issues,” Materials Today, vol. 9, no. 3, pp. 40–50, 2006. View at Publisher · View at Google Scholar · View at Scopus
  3. D. H. Reneker, A. L. Yarin, H. Fong, and S. Koombhongse, “Bending instability of electrically charged liquid jets of polymer solutions in electrospinning,” Journal of Applied Physics, vol. 87, no. 9, pp. 4531–4547, 2000. View at Publisher · View at Google Scholar · View at Scopus
  4. A. Greiner and J. H. Wendorff, “Electrospinning: a fascinating method for the preparation of ultrathin fibers,” Angewandte Chemie International Edition, vol. 46, no. 30, pp. 5670–5703, 2007. View at Publisher · View at Google Scholar
  5. N. Bhardwaj and S. C. Kundu, “Electrospinning: a fascinating fiber fabrication technique,” Biotechnology Advances, vol. 28, no. 3, pp. 325–347, 2010. View at Publisher · View at Google Scholar · View at Scopus
  6. H. J. Kim, H. R. Pant, C. H. Park, L. D. Tijing, N. J. Choi, and C. S. Kim, “Hydrothermal growth of mop-brush-shaped ZnO rods on the surface of electrospun nylon-6 nanofibers,” Ceramics International, vol. 39, no. 3, pp. 3095–3102, 2013. View at Publisher · View at Google Scholar · View at Scopus
  7. Y. Dzenis, “Spinning continuous fibers for nanotechnology,” Science, vol. 304, no. 5679, pp. 1917–1919, 2004. View at Publisher · View at Google Scholar · View at Scopus
  8. S. J. Kim, Y. J. Kang, and N.-J. Choi, “Optical-fiber electronic speckle pattern interferometry for quantitative measurement of defects on aluminum liners in composite pressure vessels,” Journal of the Optical Society of Korea, vol. 17, no. 1, pp. 50–56, 2013. View at Publisher · View at Google Scholar · View at Scopus
  9. K. Saeed, S. Haider, T.-J. Oh, and S.-Y. Park, “Preparation of amidoxime-modified polyacrylonitrile (PAN-oxime) nanofibers and their applications to metal ions adsorption,” Journal of Membrane Science, vol. 322, no. 2, pp. 400–405, 2008. View at Publisher · View at Google Scholar · View at Scopus
  10. P. Raghavan, X. H. Zhao, J.-K. Kim et al., “Ionic conductivity and electrochemical properties of nanocomposite polymer electrolytes based on electrospun poly(vinylidene fluoride-co-hexafluoropropylene) with nano-sized ceramic fillers,” Electrochimica Acta, vol. 54, no. 2, pp. 228–234, 2008. View at Publisher · View at Google Scholar · View at Scopus
  11. S. G. Kumbar, S. P. Nukavarapu, R. James, L. S. Nair, and C. T. Laurencin, “Electrospun poly(lactic acid-co-glycolic acid) scaffolds for skin tissue engineering,” Biomaterials, vol. 29, no. 30, pp. 4100–4107, 2008. View at Publisher · View at Google Scholar · View at Scopus
  12. H.-F. Wen, C. Yang, D.-G. Yu, X.-Y. Li, and D.-F. Zhang, “Electrospun zein nanoribbons for treatment of lead-contained wastewater,” Chemical Engineering Journal, vol. 290, pp. 263–272, 2016. View at Publisher · View at Google Scholar
  13. D. G. Yu, C. Yang, M. Jin et al., “Medicated Janus fibers fabricated using a Teflon-coated side-by-side spinneret,” Colloids and Surfaces B: Biointerfaces, vol. 138, pp. 110–116, 2016. View at Publisher · View at Google Scholar
  14. D.-G. Yu, X.-Y. Li, X. Wang, J.-H. Yang, S. W. A. Bligh, and G. R. Williams, “Nanofibers fabricated using triaxial electrospinning as zero order drug delivery systems,” ACS Applied Materials and Interfaces, vol. 7, no. 33, pp. 18891–18897, 2015. View at Publisher · View at Google Scholar · View at Scopus
  15. I. G. Kim, J.-H. Lee, A. R. Unnithan, C.-H. Park, and C. S. Kim, “A comprehensive electric field analysis of cylinder-type multi-nozzle electrospinning system for mass production of nanofibers,” Journal of Industrial and Engineering Chemistry, vol. 31, pp. 251–256, 2015. View at Publisher · View at Google Scholar · View at Scopus
  16. C. Burger, B. S. Hsiao, and B. J. Chu, “Nanofibrous materials and their applications,” Annual Review of Materials Research, vol. 36, pp. 333–368, 2006. View at Publisher · View at Google Scholar
  17. M. M. Demir, I. Yilgor, E. Yilgor, and B. Erman, “Electrospinning of polyurethane fibers,” Polymer, vol. 43, no. 11, pp. 3303–3309, 2002. View at Publisher · View at Google Scholar · View at Scopus
  18. D. Aussawasathien, C. Teerawattananon, and A. Vongachariya, “Separation of micron to sub-micron particles from water: electrospun nylon-6 nanofibrous membranes as pre-filters,” Journal of Membrane Science, vol. 315, no. 1-2, pp. 11–19, 2008. View at Publisher · View at Google Scholar · View at Scopus
  19. H. J. Kim, H. R. Pant, C. H. Park et al., “Electrical properties of ZnO/nylon-6 spider-wave-like nanonets prepared via electrospinning,” Digest Journal of Nanomaterials and Biostructures, vol. 8, pp. 385–393, 2013. View at Google Scholar · View at Scopus
  20. H. R. Pant, M. P. Bajgai, K. T. Nam et al., “Electrospun nylon-6 spider-net like nanofiber mat containing TiO2 nanoparticles: a multifunctional nanocomposite textile material,” Journal of Hazardous Materials, vol. 185, no. 1, pp. 124–130, 2011. View at Publisher · View at Google Scholar · View at Scopus
  21. H. R. Pant, D. R. Pandeya, K. T. Nam, W.-I. Baek, S. T. Hong, and H. Y. Kim, “Photocatalytic and antibacterial properties of a TiO2/nylon-6 electrospun nanocomposite mat containing silver nanoparticles,” Journal of Hazardous Materials, vol. 189, no. 1-2, pp. 465–471, 2011. View at Publisher · View at Google Scholar · View at Scopus
  22. H. J. Kim, H. R. Pant, N. J. Choi, and C. S. Kim, “Fly ash/polyurethane thin film for the adsorption of volatile organic compounds (VOCs) from air,” Fibers and Polymers, vol. 15, no. 7, pp. 1393–1398, 2014. View at Publisher · View at Google Scholar · View at Scopus
  23. H. J. Kim, H. R. Pant, N. J. Choi, and C. S. Kim, “Composite electrospun fly ash/polyurethane fibers for absorption of volatile organic compounds from air,” Chemical Engineering Journal, vol. 230, pp. 244–250, 2013. View at Publisher · View at Google Scholar · View at Scopus
  24. E. Scholten, L. Bromberg, G. C. Rutledge, and T. A. Hatton, “Electrospun polyurethane fibers for absorption of volatile organic compounds from air,” ACS Applied Materials and Interfaces, vol. 3, no. 10, pp. 3902–3909, 2011. View at Publisher · View at Google Scholar · View at Scopus
  25. I. Jarraya, S. Fourmentin, M. Benzina, and S. Bouaziz, “VOC adsorption on raw and modified clay materials,” Chemical Geology, vol. 275, no. 1-2, pp. 1–8, 2010. View at Publisher · View at Google Scholar · View at Scopus
  26. F. Qu, L. Z. Zhu, and K. Yang, “Adsorption behaviors of volatile organic compounds (VOCs) on porous clay heterostructures (PCH),” Journal of Hazardous Materials, vol. 170, no. 1, pp. 7–12, 2009. View at Publisher · View at Google Scholar · View at Scopus
  27. L. Zhu, S. Tian, and Y. Shi, “Adsorption of volatile organic compounds onto porous clay heterostructures based on spent organobentonites,” Clays and Clay Minerals, vol. 53, no. 2, pp. 123–136, 2005. View at Publisher · View at Google Scholar · View at Scopus
  28. J. H. Park and D. I. Jung, “Removal of total phosphorus (TP) from municipal wastewater using loess,” Desalination, vol. 269, no. 1–3, pp. 104–110, 2011. View at Publisher · View at Google Scholar · View at Scopus
  29. S. S. Tahir and N. Rauf, “Thermodynamic studies of Ni(II) adsorption onto bentonite from aqueous solution,” Journal of Chemical Thermodynamics, vol. 35, no. 12, pp. 2003–2009, 2003. View at Publisher · View at Google Scholar · View at Scopus
  30. B. Koumanova and P. Peeva-Antova, “Adsorption of p-chlorophenol from aqueous solutions on bentonite and perlite,” Journal of Hazardous Materials, vol. 90, no. 3, pp. 229–234, 2002. View at Publisher · View at Google Scholar · View at Scopus
  31. T. An, H. Chen, H. Zhan, K. Zhu, and R. Berndtsson, “Sorption kinetics of naphthalene and phenanthrene in loess soils,” Environmental Geology, vol. 47, no. 4, pp. 467–474, 2005. View at Publisher · View at Google Scholar · View at Scopus
  32. T. B. İyim and G. Güçlü, “Removal of basic dyes from aqueous solutions using natural clay,” Desalination, vol. 249, no. 3, pp. 1377–1379, 2009. View at Publisher · View at Google Scholar · View at Scopus
  33. F. A. Sheikh, N. A. M. Barakat, M. A. Kanjwal et al., “Electrospun antimicrobial polyurethane nanofibers containing silver nanoparticles for biotechnological applications,” Macromolecular Research, vol. 17, no. 9, pp. 688–696, 2009. View at Publisher · View at Google Scholar · View at Scopus
  34. L. D. Tijing, M. T. G. Ruelo, A. Amarjargal et al., “Antibacterial and superhydrophilic electrospun polyurethane nanocomposite fibers containing tourmaline nanoparticles,” Chemical Engineering Journal, vol. 197, pp. 41–48, 2012. View at Publisher · View at Google Scholar · View at Scopus
  35. W. K. Son, J. H. Youk, T. S. Lee, and W. H. Park, “The effects of solution properties and polyelectrolyte on electrospinning of ultrafine poly(ethylene oxide) fibers,” Polymer, vol. 45, no. 9, pp. 2959–2966, 2004. View at Publisher · View at Google Scholar · View at Scopus
  36. A. S. Khan, Z. Ahmed, M. J. Edirisinghe, F. S. L. Wong, and I. U. Rehman, “Preparation and characterization of a novel bioactive restorative composite based on covalently coupled polyurethane-nanohydroxyapatite fibres,” Acta Biomaterialia, vol. 4, no. 5, pp. 1275–1287, 2008. View at Publisher · View at Google Scholar · View at Scopus
  37. C. Zhou, R. Chu, R. Wu, and Q. Wu, “Electrospun polyethylene oxide/cellulose nanocrystal composite nanofibrous mats with homogeneous and heterogeneous microstructures,” Biomacromolecules, vol. 12, no. 7, pp. 2617–2625, 2011. View at Publisher · View at Google Scholar · View at Scopus
  38. G. P. Dong, X. D. Xiao, X. F. Liu et al., “Preparation and characterization of Ag nanoparticle-embedded polymer electrospun nanofibers,” Journal of Nanoparticle Research, vol. 12, no. 4, pp. 1319–1329, 2010. View at Publisher · View at Google Scholar · View at Scopus
  39. J. Völter, “A π-complex mechanism for catalytic hydrogenation of the benzene ring,” Journal of Catalysis, vol. 3, no. 3, pp. 297–298, 1964. View at Publisher · View at Google Scholar · View at Scopus
  40. T. T. Phuong, J. Massardier, and P. Gallezot, “Competitive hydrogenation of benzene and toluene on group VIII metals: correlation with the electronic structure,” Journal of Catalysis, vol. 102, no. 2, pp. 456–459, 1986. View at Publisher · View at Google Scholar · View at Scopus
  41. S. B. Lee, K. W. Chung, I. K. Hong, and H. J. Kim, “Selective catalytic oxidation of volatile organic solvent mixtures,” Journal of Industrial and Engineering Chemistry, vol. 7, pp. 193–198, 2001. View at Google Scholar