Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2016 (2016), Article ID 8650631, 8 pages
Research Article

Development in Rubber Preparation for Endoscopic Training Simulator

1Biomedical Signal Processing Laboratory, National Electronics and Computer Technology Center, 112 Thailand Science Park, Phahonyothin Road, Khlong Nueng, Khlong Luang, Pathum Thani 12120, Thailand
2Department of Mechanical and Manufacturing Engineering, Faculty of Science and Engineering, Kasetsart University, Chalermphrakiat Sakon Nakhon Province Campus, Sakon Nakhon 47000, Thailand

Received 18 February 2016; Revised 14 June 2016; Accepted 15 June 2016

Academic Editor: Somchai Thongtem

Copyright © 2016 D. Surangsrirat et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

D. Surangsrirat, A. Tongkratoke, S. Samphanyuth, T. Sununtachaikul, and A. Pramuanjaroenkij, “Development in Rubber Preparation for Endoscopic Training Simulator,” Advances in Materials Science and Engineering, vol. 2016, Article ID 8650631, 8 pages, 2016. doi:10.1155/2016/8650631