Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2016, Article ID 9070468, 6 pages
http://dx.doi.org/10.1155/2016/9070468
Research Article

Potential of New-Generation Electron Beam Technology in Interface Modification of Cold and HVOF Sprayed MCrAlY Bond Coats

Institute of Materials Science and Engineering, NETME Centre, Brno University of Technology, 616 69 Brno, Czech Republic

Received 4 September 2015; Revised 24 November 2015; Accepted 25 November 2015

Academic Editor: Ming-Xing Zhang

Copyright © 2016 J. Cizek et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. R. Zenker, A. Buchwalder, K. Rüthrich, W. Griesbach, and K. Nagel, “First results of a new duplex surface treatment for cast iron: electron beam remelting and plasma nitriding,” Surface and Coatings Technology, vol. 236, pp. 58–62, 2013. View at Publisher · View at Google Scholar · View at Scopus
  2. J. C. Sabol, C. J. Marvel, M. Watanabe, T. Pasang, and W. Z. Misiolek, “Confirmation of the ω-phase in electron beam welded Ti-5Al-5V-5Mo-3Cr by high-resolution scanning transmission electron microscopy: an initial investigation into its effects on embrittlement,” Scripta Materialia, vol. 92, pp. 15–18, 2014. View at Publisher · View at Google Scholar · View at Scopus
  3. J. Kim and Y. Kawamura, “Electron beam welding of the dissimilar Zr-based bulk metallic glass and Ti metal,” Scripta Materialia, vol. 56, no. 8, pp. 709–712, 2007. View at Publisher · View at Google Scholar · View at Scopus
  4. T. Fujieda, H. Shiratori, K. Kuwabara et al., “First demonstration of promising selective electron beam melting method for utilizing high-entropy alloys as engineering materials,” Materials Letters, vol. 159, pp. 12–15, 2015. View at Publisher · View at Google Scholar
  5. M. A. Lodes, R. Guschlbauer, and C. Körner, “Process development for the manufacturing of 99.94% pure copper via selective electron beam melting,” Materials Letters, vol. 143, pp. 298–301, 2015. View at Publisher · View at Google Scholar · View at Scopus
  6. T. Ando, A. Miyazoe, N. Hirota et al., “Direct production of Nb3Al superconducting coil by electron beam irradiation on a cold-sprayed cylinder,” Surface and Coatings Technology, vol. 205, no. 7, pp. 1990–1994, 2010. View at Publisher · View at Google Scholar · View at Scopus
  7. D. Tomus, M. Qian, C. A. Brice, and B. C. Muddle, “Electron beam processing of Al-2Sc alloy for enhanced precipitation hardening,” Scripta Materialia, vol. 63, no. 2, pp. 151–154, 2010. View at Publisher · View at Google Scholar · View at Scopus
  8. S. Kageyama, N. Tamon, J. Kugai et al., “Radiation induced synthesis of PtCu/C nanoparticles using high-energy electron beam,” Materials Letters, vol. 82, pp. 33–35, 2012. View at Publisher · View at Google Scholar · View at Scopus
  9. H. Su, J. Zhang, L. Liu, and H. Fu, “Preparation and microstructure evolution of directionally solidified Al2O3/YAG/YSZ ternary eutectic ceramics by a modified electron beam floating zone melting,” Materials Letters, vol. 91, pp. 92–95, 2013. View at Publisher · View at Google Scholar · View at Scopus
  10. T. Grosdidier, J. X. Zou, N. Stein, C. Boulanger, S. Z. Hao, and C. Dong, “Texture modification, grain refinement and improved hardness/corrosion balance of a FeAl alloy by pulsed electron beam surface treatment in the ‘heating mode’,” Scripta Materialia, vol. 58, no. 12, pp. 1058–1061, 2008. View at Publisher · View at Google Scholar · View at Scopus
  11. X. Zhao, T. Hashimoto, and P. Xiao, “Effect of the top coat on the phase transformation of thermally grown oxide in thermal barrier coatings,” Scripta Materialia, vol. 55, no. 11, pp. 1051–1054, 2006. View at Publisher · View at Google Scholar · View at Scopus
  12. R. Zenker, G. Sacher, A. Buchwalder, J. Liebich, A. Reiter, and R. Häßler, “Hybrid technology hard coating—electron beam surface hardening,” Surface and Coatings Technology, vol. 202, no. 4–7, pp. 804–808, 2007. View at Publisher · View at Google Scholar · View at Scopus
  13. D. Nam, J. Do, and S. Lee, “Improvement of hardness and fracture toughness of surface composites fabricated by high-energy electron-beam irradiation with Fe-alloy powders and VC powders,” Scripta Materialia, vol. 60, no. 8, pp. 695–698, 2009. View at Publisher · View at Google Scholar · View at Scopus
  14. A. D. Smigelskas and E. O. Kirkendall, “Zinc diffusion in alpha brass,” Transactions of AIME, vol. 171, pp. 130–142, 1947. View at Google Scholar
  15. D. R. G. Achar, R. Munoz-Arroyo, L. Singheiser, and W. J. Quadakkers, “Modelling of phase equilibria in MCrAlY coating systems,” Surface and Coatings Technology, vol. 187, no. 2-3, pp. 272–283, 2004. View at Publisher · View at Google Scholar · View at Scopus
  16. W. R. Chen, X. Wu, B. R. Marple, and P. C. Patnaik, “Oxidation and crack nucleation/growth in an air-plasma-sprayed thermal barrier coating with NiCrAlY bond coat,” Surface and Coatings Technology, vol. 197, no. 1, pp. 109–115, 2005. View at Publisher · View at Google Scholar · View at Scopus
  17. W. R. Chen, X. Wu, B. R. Marple, D. R. Nagy, and P. C. Patnaik, “TGO growth behaviour in TBCs with APS and HVOF bond coats,” Surface and Coatings Technology, vol. 202, no. 12, pp. 2677–2683, 2008. View at Publisher · View at Google Scholar · View at Scopus
  18. A. Papyrin, V. Kosarev, S. Klinkov, A. Alkimov, and V. Fomin, Cold Spray Technology, Elsevier, 2007.
  19. H. Assadi, F. Gärtner, T. Stoltenhoff, and H. Kreye, “Bonding mechanism in cold gas spraying,” Acta Materialia, vol. 51, no. 15, pp. 4379–4394, 2003. View at Publisher · View at Google Scholar · View at Scopus
  20. J. Cizek, O. Man, P. Roupcova, K. Loke, and I. Dlouhy, “Oxidation performance of cold spray Ti-Al barrier coated γ-TiAl intermetallic substrates,” Surface and Coatings Technology, vol. 268, pp. 85–89, 2015, 6th Rencontres Internationales de la Projection Thermique. View at Publisher · View at Google Scholar
  21. J. Cizek, O. Kovarik, J. Siegl, K. A. Khor, and I. Dlouhy, “Influence of plasma and cold spray deposited Ti Layers on high-cycle fatigue properties of Ti6Al4V substrates,” Surface and Coatings Technology, vol. 217, pp. 23–33, 2013. View at Publisher · View at Google Scholar
  22. R. C. Tucker, ASM Handbook: Thermal Spray Technology, ASM International, 2013.
  23. C. Lyphout, P. Nylén, and L. Östergren, “Relationships between process parameters, microstructure, and adhesion strength of HVOF sprayed IN718 coatings,” Journal of Thermal Spray Technology, vol. 20, no. 1-2, pp. 76–82, 2011. View at Publisher · View at Google Scholar · View at Scopus
  24. O. Kovářík, J. Siegl, and Z. Procházka, “Fatigue behavior of bodies with thermally sprayed metallic and ceramic deposits,” Journal of Thermal Spray Technology, vol. 17, no. 4, pp. 525–532, 2008. View at Publisher · View at Google Scholar · View at Scopus
  25. P. Richer, M. Yandouzi, L. Beauvais, and B. Jodoin, “Oxidation behaviour of CoNiCrAlY bond coats produced by plasma, HVOF and cold gas dynamic spraying,” Surface and Coatings Technology, vol. 204, no. 24, pp. 3962–3974, 2010. View at Publisher · View at Google Scholar · View at Scopus
  26. Q. Zhang, C.-J. Li, C.-X. Li, G.-J. Yang, and S.-C. Lui, “Study of oxidation behavior of nanostructured NiCrAlY bond coatings deposited by cold spraying,” Surface and Coatings Technology, vol. 202, no. 14, pp. 3378–3384, 2008. View at Publisher · View at Google Scholar · View at Scopus
  27. P. Gavendova, J. Cizek, J. Cupera, M. Hasegawa, and I. Dlouhy, “Microstructure modification of CGDS and HVOF sprayed CoNiCrAlY bond coat remelted by electron beam,” Procedia Materials Science, In press.
  28. U. Dragos, M. Gabriela, B. Waltraut, and C. Ioan, “Improvement of the oxidation behaviour of electron beam remelted MCrAlY coatings,” Solid State Sciences, vol. 7, no. 4, pp. 459–464, 2005. View at Publisher · View at Google Scholar · View at Scopus