Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2016, Article ID 9490375, 8 pages
http://dx.doi.org/10.1155/2016/9490375
Research Article

Torsional Behaviour and Finite Element Analysis of the Hybrid Laminated Composite Shafts: Comparison of VARTM with Vacuum Bagging Manufacturing Method

1Department of Materials Science and Engineering, Erciyes University, Melikgazi, 38039 Kayseri, Turkey
2Department of Mechanical Engineering, Meliksah University, Talas, 38280 Kayseri, Turkey

Received 1 July 2015; Accepted 7 December 2015

Academic Editor: Antonio Riveiro

Copyright © 2016 Mehmet Emin Taşdelen et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. A. P. Mouritz, E. Gellert, P. Burchill, and K. Challis, “Review of advanced composite structures for naval ships and submarines,” Composite Structures, vol. 53, no. 1, pp. 21–24, 2001. View at Publisher · View at Google Scholar · View at Scopus
  2. S. A. Mutasher, B. B. Sahari, A. M. S. Hamouda, and S. M. Sapuan, “Static and dynamic characteristics of a hybrid aluminium/composite drive shaft,” Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, vol. 221, no. 2, pp. 63–75, 2007. View at Publisher · View at Google Scholar · View at Scopus
  3. V. L. Kulakov, N. A. Panfilov, and G. G. Portnov, “Evaluating the feasibility of using composites in ship shafting 1. Analysis of the loads and stress state of a composite shaft,” Mechanics of Composite Materials, vol. 31, no. 6, pp. 565–572, 1996. View at Publisher · View at Google Scholar · View at Scopus
  4. V. L. Kulakov, N. A. Panfilov, and G. G. Pormov, “Evaluation of potential composite application in ship shaftlines 2. Theoretical study of the crack-nucleation threshold and load-carrying capacity of [0°/±φ] laminated composites loades in shear and uniaxial tension or compression in the reinforcement plane,” Mechanics of Composite Materials, vol. 32, no. 1, pp. 39–47, 1996. View at Publisher · View at Google Scholar
  5. J. S. Tate, A. D. Kelkar, and J. Rice, “Feasibility study of VARTM manufacturing of carbon biaxial braided composites using EPON 9504 epoxy resin system,” in Proceedings of the 8th Japan International SAMPE Symposium, pp. 1145–1148, Tokyo, Japan, November 2003.
  6. B. Spencer and J. McGee, “Design methodology for a composite drive shaft,” in Proceedings of the Advanced Composites Conference, Dearborn, Mich, USA, December 1985.
  7. J. S. Tate, A. D. Kelkar, and V. A. Kelkar, “Failure analysis of biaxial braided composites under fatigue loading,” in ECF15, Stockolm 2004, 2013. View at Google Scholar
  8. E. C. Botelho, R. A. Silva, L. C. Pardini, and M. C. Rezende, “A review on the development and properties of continuous fiber/epoxy/aluminum hybrid composites for aircraft structures,” Materials Research, vol. 9, no. 3, pp. 247–256, 2006. View at Google Scholar · View at Scopus
  9. M. Tanoğlu and M. Toğulga, “Kompozit malzemeler ve jeotermal uygulamaları. VI. Ulusal Tesisat Muhendisliği Kongresi (Teskon),” in Jeoternal Enerji Doğrudan Isıtma Sistemleri; Temelleri ve Tasarımı II. Seminer Kitabı E/2003/328-4, pp. 407–419, 2003. View at Google Scholar
  10. Z. Đorđević, S. Maksimović, and I. Ilić, “Dynamic analysis of hybrid aluminum/composite shafts,” Scientific Technical Review, vol. 58, no. 2, pp. 3–7, 2008. View at Google Scholar
  11. Y. A. Khalid, S. A. Mutasher, B. B. Sahari, and A. M. S. Hamouda, “Bending fatigue behavior of hybrid aluminum/composite drive shafts,” Materials & Design, vol. 28, no. 1, pp. 329–334, 2007. View at Publisher · View at Google Scholar · View at Scopus
  12. D. G. Lee, H. S. Kim, J. W. Kim, and J. K. Kim, “Design and manufacture of an automotive hybrid aluminum/composite drive shaft,” Composite Structures, vol. 63, no. 1, pp. 87–99, 2004. View at Publisher · View at Google Scholar · View at Scopus
  13. D. H. Cho, D. G. Lee, and J. H. Choi, “Manufacture of one-piece automotive drive shafts with aluminum and composite materials,” Composite Structures, vol. 38, no. 1–4, pp. 309–319, 1997. View at Publisher · View at Google Scholar · View at Scopus
  14. S. A. Mutasher, “Prediction of the torsional strength of the hybrid aluminum/composite drive shaft,” Materials & Design, vol. 30, no. 2, pp. 215–220, 2009. View at Publisher · View at Google Scholar · View at Scopus
  15. M. M. Shokrieh, A. Hasani, and L. B. Lessard, “Shear buckling of a composite drive shaft under torsion,” Composite Structures, vol. 64, no. 1, pp. 63–69, 2004. View at Publisher · View at Google Scholar · View at Scopus
  16. M. A. Badie, E. Mahdi, and A. M. S. Hamouda, “An investigation into hybrid carbon/glass fiber reinforced epoxy composite automotive drive shaft,” Materials & Design, vol. 32, no. 3, pp. 1485–1500, 2011. View at Publisher · View at Google Scholar · View at Scopus
  17. J. S. Tate, A. D. Kelkar, and J. D. Whitcomb, “Effect of braid angle on fatigue performance of biaxial braided composites,” International Journal of Fatigue, vol. 28, no. 10, pp. 1239–1247, 2006. View at Publisher · View at Google Scholar · View at Scopus
  18. K. Xu and X. W. Xu, “Finite element analysis of mechanical properties of 3D five-directional braided composites,” Materials Science and Engineering A, vol. 487, no. 1-2, pp. 499–509, 2008. View at Publisher · View at Google Scholar · View at Scopus
  19. H. S. Kim, S. W. Park, H. Y. Hwang, and D. G. Lee, “Effect of the smart cure cycle on the performance of the co-cured aluminum/composite hybrid shaft,” Composite Structures, vol. 75, no. 1–4, pp. 276–288, 2006. View at Publisher · View at Google Scholar · View at Scopus
  20. T. Rangaswamy, S. Vijayarangan, R. Chandrashekar, T. Venkatesh, and K. Anantharaman, “Optimal design and analysis of automotive composite drive shaft,” in Proceedings of the International Symposium of Research Students on Materials Science and Engineering, pp. 1–9, December 2002.
  21. C. Ruegg and J. Habermeier, “Composite propeller shafts design and optimization,” in Advances in Composite Materials, pp. 1740–1755, Pergamon Press, Paris, France, 1980. View at Google Scholar
  22. E. Sevkat, H. Tumer, M. H. Kelestemur, and S. Dogan, “Effect of torsional strain-rate and lay-up sequences on the performance of hybrid composite shafts,” Materials & Design, vol. 60, pp. 310–319, 2014. View at Publisher · View at Google Scholar · View at Scopus
  23. E. Sevkat and H. Tumer, “Residual torsional properties of composite shafts subjected to impact loadings,” Materials & Design, vol. 51, pp. 956–967, 2013. View at Publisher · View at Google Scholar · View at Scopus
  24. J. A. Maley, An Investigation into Low-Cost Manufacturing of Carbon Epoxy Composites and a Novel “Mouldless” Technique Using the Vacuum Assisted Resin Transfer Moulding (VARTM) Method, Carleton University, Ottawa, Canada, 2008.
  25. H. Saito and I. Kimpara, “Evaluation of impact damage mechanism of multi-axial stitched CFRP laminate,” Composites Part A: Applied Science and Manufacturing, vol. 37, no. 12, pp. 2226–2235, 2006. View at Publisher · View at Google Scholar · View at Scopus
  26. C. Wittman and G. D. Shook, “Hand lay-up techniques,” in Handbook of Composites, G. Lubin, Ed., pp. 321–367, Springer, New York, NY, USA, 1982. View at Publisher · View at Google Scholar
  27. R. M. Jones, Mechanics of Composite Materials, Taylor & Francis, 1998.
  28. E. Sevkat, B. Liaw, F. Delale, and B. B. Raju, “Drop-weight impact of plain-woven hybrid glass-graphite/toughened epoxy composites,” Composites Part A: Applied Science and Manufacturing, vol. 40, no. 8, pp. 1090–1110, 2009. View at Publisher · View at Google Scholar · View at Scopus