Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2016, Article ID 9526251, 8 pages
http://dx.doi.org/10.1155/2016/9526251
Research Article

Effects of Magnetite Aggregate and Steel Powder on Thermal Conductivity and Porosity in Concrete for Nuclear Power Plant

1Department of Architectural Engineering, Hanyang University, ERICA, Ansan 426-791, Republic of Korea
2Department of Civil Engineering, Hannam University, Daejeon 306-791, Republic of Korea

Received 11 August 2015; Revised 9 December 2015; Accepted 13 December 2015

Academic Editor: Wei Zhou

Copyright © 2016 Han-Seung Lee and Seung-Jun Kwon. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. J. P. Broomfield, Corrosion of Steel in Concrete: Understanding, Investigation and Repair, E&FN, London, UK, 1997.
  2. M. D. A. Thomas and P. B. Bamforth, “Modeling chloride diffusion in concrete: effect of fly ash and slag,” Cement and Concrete Research, vol. 29, no. 4, pp. 487–495, 1999. View at Google Scholar
  3. B. Gérard and J. Marchand, “Influence of cracking on the diffusion properties of cement-based materials. Part I. Influence of continuous cracks on the steady-state regime,” Cement and Concrete Research, vol. 30, no. 1, pp. 37–43, 2000. View at Publisher · View at Google Scholar · View at Scopus
  4. Q.-F. Liu, J. Yang, J. Xia, D. Easterbrook, L.-Y. Li, and X.-Y. Lu, “A numerical study on chloride migration in cracked concrete using multi-component ionic transport models,” Computational Materials Science, vol. 99, no. 3, pp. 396–416, 2015. View at Publisher · View at Google Scholar · View at Scopus
  5. H. Ranaivomananaa, J. Verdiera, A. Selliera, and X. Bourbonb, “Sealing process induced by carbonation of localized cracks in cementitious materials,” Cement and Concrete Composites, vol. 37, no. 3, pp. 37–46, 2013. View at Google Scholar
  6. H.-W. Song, S.-J. Kwon, K.-J. Byun, and C.-K. Park, “Predicting carbonation in early-aged cracked concrete,” Cement and Concrete Research, vol. 36, no. 5, pp. 979–989, 2006. View at Publisher · View at Google Scholar · View at Scopus
  7. S.-J. Kwon and U. J. Na, “Prediction of durability for RC column with crack and joint under carbonation based on probabilistic approach,” International Journal of Concrete Structures and Materials, vol. 5, no. 1, pp. 11–18, 2011. View at Publisher · View at Google Scholar
  8. Y. S. Choi and E. I. Yang, “Effect of calcium leaching on the pore structure, strength, and chloride penetration resistance in concrete specimens,” Nuclear Engineering and Design, vol. 259, pp. 126–136, 2013. View at Publisher · View at Google Scholar · View at Scopus
  9. K. G. Field, I. Remec, and Y. L. Pape, “Radiation effects in concrete for nuclear power plants—part I: quantification of radiation exposure and radiation effects,” Nuclear Engineering and Design, vol. 282, no. 2, pp. 126–143, 2015. View at Publisher · View at Google Scholar · View at Scopus
  10. J. W. M. Spicer, R. Osiander, L. C. Aamodt, and R. B. Givens, “Microwave thermoreflectometry for detection of rebar corrosion,” in Structural Materials Technology III: An NDT Conference, vol. 3400 of Proceedings of SPIE, pp. 402–409, San Antonio, Tex, USA, 1998.
  11. P. Meshgin and Y. Xi, “Multi-scale composite models for the effective thermal conductivity of PCM-concrete,” Construction and Building Materials, vol. 48, pp. 371–378, 2013. View at Publisher · View at Google Scholar · View at Scopus
  12. K. H. Yang and J. H. Moon, “Mix proportions and physical properties of heavy weight concrete for nuclear power plant,” Korea Institute of Building and Construction, vol. 12, no. 3, pp. 9–14, 2012 (Korean). View at Google Scholar
  13. ACI Committee, “Code requirements for nuclear safety-related concrete structures,” ACI 349-06, American Concrete Institute, 2006. View at Google Scholar
  14. O. Evrard, J. P. Laceby, H. Lepage, Y. Onda, O. Cerdan, and S. Ayrault, “Radiocesium transfer from hillslopes to the Pacific Ocean after the Fukushima Nuclear Power Plant accident: a review,” Journal of Environmental Radioactivity, vol. 148, no. 10, pp. 92–110, 2015. View at Publisher · View at Google Scholar
  15. K. Rehdanza, H. Welschc, D. Naritaa, and T. Okuboe, “Well-being effects of a major natural disaster: the case of Fukushima,” Journal of Economic Behavior & Organization, vol. 116, no. 8, pp. 500–517, 2015. View at Google Scholar
  16. S. E. Jeon, An experimental research on thermal properties of concrete [M.S. thesis], Department of Civil Engineering, Korea Advanced Institute of Science and Technology, 1997.
  17. K.-H. Kim, S.-E. Jeon, J.-K. Kim, and S. Yang, “An experimental study on thermal conductivity of concrete,” Cement and Concrete Research, vol. 33, no. 3, pp. 363–371, 2003. View at Publisher · View at Google Scholar · View at Scopus
  18. ACI Committee, “Guide to thermal properties of concrete and masonry systems,” ACI Committee 122R, American Concrete Institute, 2002. View at Google Scholar
  19. B. Mutnuri, Thermal conductivity characterization of composite materials [M.S. thesis], College of Engineering and Mineral Resources, West Virginia University, 2006.
  20. W. J. Parker, R. J. Jenkins, C. P. Butler, and G. L. Abbott, “Flash method of determining thermal diffusivity, heat capacity, and thermal conductivity,” Journal of Applied Physics, vol. 32, no. 9, pp. 1679–1684, 1961. View at Publisher · View at Google Scholar · View at Scopus
  21. J. M. Molina, J. Narciso, L. Weber, A. Mortensen, and E. Louis, “Thermal conductivity of Al-SiC composites with monomodal and bimodal particle size distribution,” Materials Science and Engineering A, vol. 480, no. 1-2, pp. 483–488, 2008. View at Publisher · View at Google Scholar · View at Scopus
  22. J. K. Lee and J. G. Kim, “Analytical study on effective thermal conductivity of three-phase composites,” Journal of the Korea Academia-Industrial cooperation Society, vol. 12, no. 7, pp. 2931–2938, 2011 (Korean). View at Publisher · View at Google Scholar
  23. A. N. Norris, A. J. Callegari, and P. Sheng, “A generalized differential effective medium theory,” Journal of the Mechanics and Physics of Solids, vol. 33, no. 6, pp. 525–543, 1985. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at Scopus
  24. H. Hiroshi and T. Minoru, “Equivalent inclusion method for steady state heat conduction in composites,” International Journal of Engineering Science, vol. 24, no. 7, pp. 1159–1172, 1986. View at Publisher · View at Google Scholar · View at Scopus
  25. Korean Standards, “Thermal insulation—determination of steady-state thermal resistance and related properties—guarded hot plate apparatus,” KS L ISO 8302, 2006. View at Google Scholar
  26. P. K. Metha and P. J. M. Monteiro, Concrete: Structure, Properties, and Materials, vol. 2, Prentice Hall, Upper Saddle River, NJ, USA, 1993.
  27. S. H. Jung and S.-J. Kwon, “Engineering properties of cement mortar with pond ash in South Korea as construction materials: from waste to concrete,” Central European Journal of Engineering, vol. 3, no. 3, pp. 522–533, 2013. View at Publisher · View at Google Scholar · View at Scopus
  28. M. P. Manahan, “Thermal expansion and conductivity of magnetite flakes taken from the Oconee-2 steam generator,” Journal of Materials Science, vol. 25, no. 8, pp. 3424–3428, 1998. View at Publisher · View at Google Scholar
  29. A. Lanciani, P. Morabito, P. Rossi et al., “Measurements of the thermophysical properties of structural materials in laboratory and in situ: methods and instrumentation,” High Temperatures—High Pressures, vol. 21, no. 4, pp. 391–400, 1989. View at Google Scholar · View at Scopus
  30. J. M. Molina, R. Prieto, J. Narciso, and E. Louis, “The effect of porosity on the thermal conductivity of Al-12 wt.% Si/SiC composites,” Scripta Materialia, vol. 60, no. 7, pp. 582–585, 2009. View at Publisher · View at Google Scholar · View at Scopus
  31. J. J. Kim, M. C. Han, and G. G. Han, “Fundamental research on corrosion control for reinforcing bar by incorporation of steel powder,” Conference of AIL-RA, vol. 1, no. 1, pp. 792–795, 2007. View at Google Scholar
  32. Y. Li, F. Kong, and R. Du, “Application of high performance concrete mixed with steel slag powder in concrete pavements,” in Proceedings of the ASCE Critical Issues in Transportation System Planning, Development, and Management (ICCTP '09), vol. 1, pp. 1–7, 2009.