Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2016, Article ID 9535940, 11 pages
http://dx.doi.org/10.1155/2016/9535940
Research Article

Rheological Characterization of Warm-Modified Asphalt Mastics Containing Electric Arc Furnace Steel Slags

Department of Civil, Environmental and Architectural Engineering (ICEA), University of Padua, Via Marzolo 9, 35131 Padua, Italy

Received 31 December 2015; Revised 4 February 2016; Accepted 7 February 2016

Academic Editor: Jainagesh A. Sekhar

Copyright © 2016 M. Pasetto et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. M. C. Rubio, G. Martinez, L. Baena, and F. Moreno, “Warm mix asphalt: an overview,” Journal of Cleaner Production, vol. 24, pp. 76–84, 2012. View at Publisher · View at Google Scholar · View at Scopus
  2. S. D. Capitão, L. G. Picado-Santos, and F. Martinho, “Pavement engineering materials: review on the use of warm-mix asphalt,” Construction and Building Materials, vol. 36, pp. 1016–1024, 2012. View at Publisher · View at Google Scholar · View at Scopus
  3. E. Pasquini, G. Giacomello, M. Pasetto, and F. Canestrari, “Laboratory evaluation of the effect of low-temperature application of warm-mix asphalts on interface shear strength,” Construction and Building Materials, vol. 88, pp. 56–63, 2015. View at Publisher · View at Google Scholar
  4. F. Merusi and F. Giuliani, “Rheological characterization of wax-modified asphalt binders at high service temperatures,” Materials and Structures, vol. 44, no. 10, pp. 1809–1820, 2011. View at Publisher · View at Google Scholar · View at Scopus
  5. F. Canestrari, A. Graziani, V. Pannunzio, and H. U. Bahia, “Rheological properties of bituminous binders with synthetic wax,” International Journal of Pavement Research and Technology, vol. 6, no. 1, pp. 15–21, 2013. View at Google Scholar · View at Scopus
  6. W. Zhao, F. Xiao, S. N. Amirkhanian, and B. J. Putman, “Characterization of rutting performance of warm additive modified asphalt mixtures,” Construction and Building Materials, vol. 31, pp. 265–272, 2012. View at Publisher · View at Google Scholar · View at Scopus
  7. F. Xiao, V. S. Punith, and S. N. Amirkhanian, “Effects of non-foaming WMA additives on asphalt binders at high performance temperatures,” Fuel, vol. 94, pp. 144–155, 2012. View at Publisher · View at Google Scholar · View at Scopus
  8. F. Morea, R. Marcozzi, and G. Castaño, “Rheological properties of asphalt binders with chemical tensoactive additives used in Warm Mix Asphalts (WMAs),” Construction and Building Materials, vol. 29, pp. 135–141, 2012. View at Publisher · View at Google Scholar · View at Scopus
  9. J. Zhang, G. Liu, L. Xu, and J. Pei, “Effects of WMA additive on the rheological properties of asphalt binder and high temperature performance grade,” Advances in Materials Science and Engineering, vol. 2015, Article ID 467891, 7 pages, 2015. View at Publisher · View at Google Scholar
  10. L. Mo, X. Li, X. Fang, M. Huurman, and S. Wu, “Laboratory investigation of compaction characteristics and performance of warm mix asphalt containing chemical additives,” Construction and Building Materials, vol. 37, pp. 239–247, 2012. View at Publisher · View at Google Scholar · View at Scopus
  11. A. M. Rodríguez-Alloza, J. Gallego, I. Pérez, A. Bonati, and F. Giuliani, “High and low temperature properties of crumb rubber modified binders containing warm mix asphalt additives,” Construction and Building Materials, vol. 53, pp. 460–466, 2014. View at Publisher · View at Google Scholar · View at Scopus
  12. N. M. Piatak, M. B. Parsons, and R. R. Seal II, “Characteristics and environmental aspects of slag: a review,” Applied Geochemistry, vol. 57, pp. 236–266, 2015. View at Google Scholar
  13. I. Z. Yildirim and M. Prezzi, “Chemical, mineralogical, and morphological properties of steel slag,” Advances in Civil Engineering, vol. 2011, Article ID 463638, 13 pages, 2011. View at Publisher · View at Google Scholar · View at Scopus
  14. T. Sofilić, V. Merle, A. Rastovčan-Mioč, M. Ćosić, and U. Sofilić, “Steel slag instead natural aggregate in asphalt mixture,” Archives of Metallurgy and Materials, vol. 55, no. 3, pp. 657–668, 2010. View at Google Scholar · View at Scopus
  15. S. Wu, Y. Xue, Q. Ye, and Y. Chen, “Utilization of steel slag as aggregates for stone mastic asphalt (SMA) mixtures,” Building and Environment, vol. 42, no. 7, pp. 2580–2585, 2007. View at Publisher · View at Google Scholar · View at Scopus
  16. S. Sorlini, A. Sanzeni, and L. Rondi, “Reuse of steel slag in bituminous paving mixtures,” Journal of Hazardous Materials, vol. 209-210, pp. 84–91, 2012. View at Publisher · View at Google Scholar · View at Scopus
  17. M. Pasetto and N. Baldo, “Mix design and performance analysis of asphalt concretes with electric arc furnace slag,” Construction and Building Materials, vol. 25, no. 8, pp. 3458–3468, 2011. View at Publisher · View at Google Scholar · View at Scopus
  18. M. Pasetto and N. Baldo, “Performance comparative analysis of stone mastic asphalts with electric arc furnace steel slag: a laboratory evaluation,” Materials and Structures, vol. 45, no. 3, pp. 411–424, 2012. View at Publisher · View at Google Scholar · View at Scopus
  19. P. Ahmedzade and B. Sengoz, “Evaluation of steel slag coarse aggregate in hot mix asphalt concrete,” Journal of Hazardous Materials, vol. 165, no. 1–3, pp. 300–305, 2009. View at Publisher · View at Google Scholar · View at Scopus
  20. J. Xie, S. Wu, J. Lin, J. Cai, Z. Chen, and W. Wei, “Recycling of basic oxygen furnace slag in asphalt mixture: material characterization & moisture damage investigation,” Construction and Building Materials, vol. 36, pp. 467–474, 2012. View at Publisher · View at Google Scholar · View at Scopus
  21. J. Xie, J. Chen, S. Wu, J. Lin, and W. Wei, “Performance characteristics of asphalt mixture with basic oxygen furnace slag,” Construction and Building Materials, vol. 38, pp. 796–803, 2013. View at Publisher · View at Google Scholar · View at Scopus
  22. Y. Xue, S. Wu, H. Hou, and J. Zha, “Experimental investigation of basic oxygen furnace slag used as aggregate in asphalt mixture,” Journal of Hazardous Materials, vol. 138, no. 2, pp. 261–268, 2006. View at Publisher · View at Google Scholar · View at Scopus
  23. F. Autelitano and F. Giuliani, “Swelling behavior of electric arc furnace aggregates for unbound granular mixtures in road construction,” International Journal of Pavement Research and Technology, vol. 8, no. 2, pp. 103–111, 2015. View at Google Scholar
  24. M. Ameri, S. Hesami, and H. Goli, “Laboratory evaluation of warm mix asphalt mixtures containing electric arc furnace (EAF) steel slag,” Construction and Building Materials, vol. 49, pp. 611–617, 2013. View at Publisher · View at Google Scholar · View at Scopus
  25. H. Wang, I. L. Al-Qadi, A. F. Faheem, H. U. Bahia, S.-H. Yang, and G. H. Reinke, “Effect of mineral filler characteristics on asphalt mastic and mixture rutting potential,” Transportation Research Record, vol. 2208, pp. 33–39, 2011. View at Publisher · View at Google Scholar · View at Scopus
  26. A. F. Faheem and H. U. Bahia, “Modelling of asphalt mastic in terms of filler-bitumen interaction,” Road Materials and Pavement Design, vol. 11, no. 1, pp. 281–303, 2010. View at Publisher · View at Google Scholar · View at Scopus
  27. Y. R. Kim and D. N. Little, “Linear viscoelastic analyis of asphalt mastics,” ASCE Journal of Materials in Civil Engineering, vol. 16, no. 2, pp. 122–132, 2004. View at Publisher · View at Google Scholar · View at Scopus
  28. F. Cardone, F. Frigio, G. Ferrotti, and F. Canestrari, “Influence of mineral fillers on the rheological response of polymer-modified bitumens and mastics,” Journal of Traffic and Transportation Engineering, vol. 2, no. 6, pp. 373–381, 2015. View at Publisher · View at Google Scholar
  29. J.-S. Chen, P.-H. Kuo, P.-S. Lin, C.-C. Huang, and K.-Y. Lin, “Experimental and theoretical characterization of the engineering behavior of bitumen mixed with mineral filler,” Materials and Structures, vol. 41, no. 6, pp. 1015–1024, 2008. View at Publisher · View at Google Scholar · View at Scopus
  30. W. Grabowski and J. Wilanowicz, “The structure of mineral fillers and their stiffening properties in filler-bitumen mastics,” Materials and Structures, vol. 41, no. 4, pp. 793–804, 2008. View at Publisher · View at Google Scholar · View at Scopus
  31. B. S. Underwood and Y. R. Kim, “Nonlinear viscoelastic analysis of asphalt cement and asphalt mastics,” International Journal of Pavement Engineering, vol. 16, no. 6, pp. 510–529, 2015. View at Publisher · View at Google Scholar · View at Scopus
  32. F. Frigio, G. Ferrotti, and F. Cardone, “Fatigue rheological characterization of polymer-modified bitumens and mastics,” in Proceedings of the 8th International RILEM SIB Symposium, Ancona, Italy, October 2015.
  33. M. Pasetto, G. Giacomello, E. Pasquini, and F. Canestrari, “Effect of warm mix chemical additives on the binder-aggregate bond strength and high-service temperature performance of asphalt mixes containing electric arc furnace steel slag,” in Proceedings of the 8th International RILEM SIB Symposium, Ancona, Italy, October 2015.
  34. T. W. Kennedy, G. A. Huber, E. T. Harrigan et al., Superior Performing Asphalt Pavement (Superpave): The Product of the SHRP Asphalt Research Program, Strategic Highway Research Program, National Research Council, Washington, DC, USA, 1994.
  35. M. L. Williams, R. F. Landel, and J. D. Ferry, “The temperature dependence of relaxation mechanisms in amorphous polymers and other glass-forming liquids,” Journal of the American Chemical Society, vol. 77, no. 14, pp. 3701–3707, 1955. View at Publisher · View at Google Scholar · View at Scopus
  36. H. U. Bahia, D. I. Hanson, M. Zeng et al., “Characterization of modified asphalt binders in superpave mix design,” NCHRP Report 459, National Cooperative Highway Research Program, Washington, DC, USA, 2011. View at Google Scholar
  37. NCHRP, “Test methods and specification criteria for mineral filler used in HMA,” NCHRP Report 9-45, National Cooperative Highway Research Program, Washington, DC, USA, 2011. View at Google Scholar
  38. S. W. Ko, R. K. Gupta, S. N. Bhattacharya, and H. J. Choi, “Rheology and physical characteristics of synthetic biodegradable aliphatic polymer blends dispersed with MWNTs,” Macromolecular Materials and Engineering, vol. 295, no. 4, pp. 320–328, 2010. View at Publisher · View at Google Scholar · View at Scopus
  39. E. Santagata, O. Baglieri, D. Dalmazzo, and L. Tsantilis, “Evaluation of the anti-rutting potential of polymer-modified binders by means of creep-recovery shear tests,” Materials and Structures, vol. 46, no. 10, pp. 1673–1682, 2013. View at Publisher · View at Google Scholar · View at Scopus