Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2016 (2016), Article ID 9583757, 12 pages
http://dx.doi.org/10.1155/2016/9583757
Research Article

Studies on Pumice Lightweight Aggregate Concrete with Quarry Dust Using Mathematical Modeling Aid of ACO Techniques

1Department of Civil Engineering, SSM Institute of Engineering and Technology, Dindigul, Tamil Nadu 624 002, India
2Department of Civil Engineering, RVS College of Engineering and Technology, Dindigul, Tamil Nadu 624 005, India

Received 1 August 2015; Revised 20 October 2015; Accepted 21 October 2015

Academic Editor: Belal F. Yousif

Copyright © 2016 J. Rex and B. Kameshwari. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. V. Patel and N. Shah, “A survey of high performance concrete developments in civil engineering field,” Journal of Civil Engineering, vol. 3, no. 2, pp. 69–79, 2013. View at Publisher · View at Google Scholar
  2. K. W. Hoe and M. Ramli, “Rational mix design approach for high strength concrete using sand with very high fineness modulus,” American Journal of Applied Sciences, vol. 7, no. 12, pp. 1562–1568, 2010. View at Publisher · View at Google Scholar · View at Scopus
  3. M. M. Al Bakri, H. Mohammed, H. Kamarudin, K. Niza, and Y. Zarina, “Review on fly ash-based geopolymer concrete without Portland Cement,” Journal of Engineering and Technology Research, vol. 3, no. 1, pp. 1–4, 2011. View at Google Scholar
  4. H. K. Kim, J. H. Jeon, and H. K. Lee, “Workability, and mechanical, acoustic and thermal properties of lightweight aggregate concrete with a high volume of entrained air,” Construction and Building Materials, vol. 29, pp. 193–200, 2012. View at Publisher · View at Google Scholar · View at Scopus
  5. A. Ben Fraj, M. Kismi, and P. Mounanga, “Valorization of coarse rigid polyurethane foam waste in lightweight aggregate concrete,” Construction and Building Materials, vol. 24, no. 6, pp. 1069–1077, 2010. View at Publisher · View at Google Scholar · View at Scopus
  6. S. O. Franklin, “Modelling of the compressive and tensile strength relationship of concrete in studies on the punching phenomenon in prestressed flat slabs,” Journal of Applied Sciences Research, vol. 6, no. 3, pp. 205–211, 2010. View at Google Scholar · View at Scopus
  7. P. Ramadoss, “Modeling for the evaluation of strength and toughness of high-performance fiber reinforced concrete,” Journal of Engineering Science and Technology, vol. 7, no. 3, pp. 280–291, 2012. View at Google Scholar · View at Scopus
  8. P. Appukutty and R. Murugesan, “Substitution of quarry dust to sand for mortar in brick masonry works,” International Journal on Design and Manufacturing Technologies, vol. 3, no. 1, pp. 59–63, 2009. View at Google Scholar
  9. P. P. Nanda, A. K. Das, and N. C. Moharana, “Stone crusher dust as a fine aggregate in concrete for paving blocks,” Journal of Civil and Structural Engineering, vol. 1, no. 3, pp. 613–620, 2010. View at Google Scholar
  10. C. Sukesh, K. B. Krishna, P. Sri Lakshmi Sai Teja, and S. Kanakambara Rao, “Partial replacement of sand with quarry dust in concrete,” International Journal of Innovative Technology and Exploring Engineering, vol. 2, no. 6, pp. 254–258, 2013. View at Google Scholar
  11. J. O. Ukpata, M. E. Ephraim, and G. A. Akeke, “Compressive strength of concrete using lateritic sand and quarry dust as fine aggregate,” Journal of Engineering and Applied Sciences, vol. 7, no. 1, pp. 81–92, 2012. View at Google Scholar · View at Scopus
  12. J. O. Ukpata and M. E. Ephraim, “Flexural and tensile strength properties of concrete using lateritic sand and quarry dust as fine aggregate,” Journal of Engineering and Applied Sciences, vol. 7, no. 3, pp. 324–331, 2012. View at Google Scholar
  13. A. Jayaraman, V. Senthilkumar, and M. Saravanan, “Compressive and tensile strength of concrete using lateritic sand and lime stone filler as fine aggregate,” Journal of Research in Engineering and Technology, vol. 3, no. 1, pp. 79–84, 2014. View at Publisher · View at Google Scholar
  14. R. Ilangovana, N. Mahendrana, and K. Nagamanib, “Strength and durability properties of concrete containing quarry rock dust as fine aggregate,” Journal of Engineering and Applied Sciences, vol. 3, no. 5, pp. 20–26, 2008. View at Google Scholar
  15. M. S. Hameed and A. S. S. Sekar, “Properties of green concrete containing quarry rock dust and marble sludge powder as fine aggregate,” Journal of Engineering and Applied Sciences, vol. 4, no. 4, pp. 83–89, 2009. View at Google Scholar · View at Scopus
  16. A. U. Abubakar and K. S. Baharudin, “Compressive strength of high volume coal bottom ash utilization as fine aggregate in fly ash-cement blended concrete,” Journal of Engineering & Technology Sciences, vol. 1, no. 4, pp. 226–239, 2013. View at Google Scholar
  17. A. Sivakumar and P. Gomathi, “Pelletized fly ash lightweight aggregate concrete: a promising material,” Journal of Civil Engineering and Construction Technology, vol. 3, no. 2, pp. 42–48, 2012. View at Publisher · View at Google Scholar
  18. A. Kabir, M. Hasan, and Md. K. Miah, “Strength prediction model for concrete,” Journal of Civil Engineering, vol. 2, no. 1, pp. 14–19, 2013. View at Google Scholar
  19. M. R. Afify and N. M. Soliman, “Feasibility of using lightweight artificial coarse aggregates in the manufacture of R. C. elements,” International Journal of Engineering and Advanced Technology, vol. 3, no. 2, pp. 290–306, 2013. View at Google Scholar
  20. M. Devi, “Performance evaluations of calcium nitrite on steel rebar corrosion in quarry dust concrete,” Journal of Engineering and Science, vol. 2, no. 10, pp. 23–27, 2013. View at Google Scholar
  21. L. Nagpal, A. Dewangan, S. Dhiman, and S. Kumar, “Evaluation of strength characteristics of concrete using crushed stone dust as fine aggregate,” Journal of Innovative Technology and Exploring Engineering, vol. 2, no. 6, pp. 102–104, 2013. View at Google Scholar
  22. T. Subbulakshmi and B. Vidivelli, “Mechanical properties of high performance concrete in corporating with quarry wastes,” Journal of Engineering and Advanced Technology, vol. 3, no. 6, pp. 231–236, 2014. View at Google Scholar