Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2016, Article ID 9789061, 7 pages
http://dx.doi.org/10.1155/2016/9789061
Research Article

Electromagnetic Stirring versus ECAP: Morphological Comparison of Al-Si-Cu Alloys to Make the Microstructural Refinement for Use in SSM Processing

Materials and Manufacturing Engineering Department (MMED), Faculty of Mechanical Engineering (FEM), University of Campinas (UNICAMP), 13083-860 Campinas, SP, Brazil

Received 17 July 2016; Revised 17 August 2016; Accepted 20 September 2016

Academic Editor: Pavel Lejcek

Copyright © 2016 Luis Vanderlei Torres et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Luis Vanderlei Torres, Luis Fernando Torres, and Eugênio José Zoqui, “Electromagnetic Stirring versus ECAP: Morphological Comparison of Al-Si-Cu Alloys to Make the Microstructural Refinement for Use in SSM Processing,” Advances in Materials Science and Engineering, vol. 2016, Article ID 9789061, 7 pages, 2016. https://doi.org/10.1155/2016/9789061.