Electromagnetic Stirring versus ECAP: Morphological Comparison of Al-Si-Cu Alloys to Make the Microstructural Refinement for Use in SSM Processing

<div>Polarized colour metallography of the EMS and ECAP samples heat treated at 584°C in which is expected to be 60% of solid fraction during 0, 30, and 90 s holding time, showing the morphology of the grain.</div>

Advances in Materials Science and Engineering

fig5

Figure 5

Figure 5: Electromagnetic Stirring versus ECAP: Morphological Comparison of Al-Si-Cu Alloys to Make the Microstructural Refinement for Use in SSM Processing 

Figure 5 | Electromagnetic Stirring versus ECAP: Morphological Comparison of Al-Si-Cu Alloys to Make the Microstructural Refinement for Use in SSM Processing 