Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2016 (2016), Article ID 9856474, 12 pages
http://dx.doi.org/10.1155/2016/9856474
Research Article

Off-Axial Tensile Properties of Precontraint PVDF Coated Polyester Fabrics under Different Tensile Rates

College of Construction Management, Jiangsu Vocational Institute of Architectural Technology, Xuzhou 221116, China

Received 30 March 2016; Revised 2 June 2016; Accepted 19 June 2016

Academic Editor: Gonzalo Martínez-Barrera

Copyright © 2016 Lanlan Zhang. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. B. Forster and M. Mollaert, European Design Guide for Tensile Surface Structures, TensiNet, 2004.
  2. T. D. Dinh, A. Rezaei, W. Punurai et al., “A shape optimization approach to integrated design and nonlinear analysis of tensioned fabric membrane structures with boundary cables,” International Journal of Solids and Structures, vol. 83, pp. 114–125, 2016. View at Publisher · View at Google Scholar · View at Scopus
  3. B. N. Bridgens and M. J. S. Birchall, “Form and function: the significance of material properties in the design of tensile fabric structures,” Engineering Structures, vol. 44, pp. 1–12, 2012. View at Publisher · View at Google Scholar · View at Scopus
  4. Y. Zhang, Q. Zhang, Z. Yang, L. Chen, and Y. Cao, “Load-dependent mechanical behavior of membrane materials and its effect on the static behaviors of membrane structures,” Journal of Materials in Civil Engineering, vol. 27, no. 11, Article ID 04015018, 2015. View at Publisher · View at Google Scholar · View at Scopus
  5. A. Ambroziak, “Mechanical properties of PVDF-coated fabric under tensile tests,” Journal of Polymer Engineering, vol. 35, no. 4, pp. 377–390, 2015. View at Publisher · View at Google Scholar · View at Scopus
  6. A. Ambroziak, “Mechanical properties of Precontraint 1202S coated fabric under biaxial tensile test with different load ratios,” Construction and Building Materials, vol. 80, no. 1, pp. 210–224, 2015. View at Publisher · View at Google Scholar · View at Scopus
  7. A. Ambroziak and P. Kłosowski, “Mechanical properties for preliminary design of structures made from PVC coated fabric,” Construction and Building Materials, vol. 50, pp. 74–81, 2014. View at Publisher · View at Google Scholar · View at Scopus
  8. A. Ambroziak, “Mechanical properties of polyester coated fabric subjected to biaxial loading,” Journal of Materials in Civil Engineering, vol. 27, no. 11, Article ID 04015012, 2015. View at Publisher · View at Google Scholar
  9. Y. Zhang, Q. Zhang, and H. Lv, “Mechanical properties of polyvinylchloride-coated fabrics processed with Precontraint® technology,” Journal of Reinforced Plastics & Composites, vol. 31, no. 23, pp. 1670–1684, 2012. View at Publisher · View at Google Scholar · View at Scopus
  10. H. W. Reinhardt, “On the biaxial testing and strength of coated fabrics,” Experimental Mechanics, vol. 16, no. 2, pp. 71–74, 1976. View at Publisher · View at Google Scholar
  11. S. H. Chen, X. Ding, R. Fangueiro, H. Yi, and X. Yang, “Tensile performance and crack propagation of coated woven fabrics under multiaxial loads,” Journal of Applied Polymer Science, vol. 113, no. 5, pp. 3388–3396, 2009. View at Publisher · View at Google Scholar · View at Scopus
  12. J. W. Chen and W. J. Chen, “Central crack tearing testing of laminated fabric uretek3216LV under uniaxial and biaxial static tensile loads,” Journal of Materials in Civil Engineering, vol. 28, no. 7, Article ID 04016028, 2016. View at Publisher · View at Google Scholar
  13. Z. Yingying, S. Xiaoguang, Z. Qilin, and L. V. Henglin, “Fracture failure analysis and strength criterion for PTFE-coated woven fabrics,” Journal of Composite Materials, vol. 49, no. 12, pp. 1409–1421, 2015. View at Publisher · View at Google Scholar · View at Scopus
  14. S. H. Chen, X. Ding, and H. L. Yi, “On the anisotropic tensile behaviors of flexible polyvinyl chloride-coated fabrics,” Textile Research Journal, vol. 77, no. 6, pp. 369–374, 2007. View at Publisher · View at Google Scholar · View at Scopus
  15. Z. Zou, J. Han, H. Liu et al., “Orthotropic behavior of PVC architectural membrane materials under tensile loading,” Journal of Zhejiang Sci-Tech University, vol. 27, no. 2, pp. 186–190, 2010. View at Google Scholar
  16. J. Cao, R. Akkerman, P. Boisse et al., “Characterization of mechanical behavior of woven fabrics: experimental methods and benchmark results,” Composites Part A: Applied Science and Manufacturing, vol. 39, no. 6, pp. 1037–1053, 2008. View at Publisher · View at Google Scholar
  17. A. G. Colman, B. N. Bridgens, P. D. Gosling, G.-T. Jou, and X.-Y. Hsu, “Shear behaviour of architectural fabrics subjected to biaxial tensile loads,” Composites Part A: Applied Science and Manufacturing, vol. 66, pp. 163–174, 2014. View at Publisher · View at Google Scholar · View at Scopus
  18. J. Launay, G. Hivet, A. V. Duong, and P. Boisse, “Experimental analysis of the influence of tensions on in plane shear behaviour of woven composite reinforcements,” Composites Science and Technology, vol. 68, no. 2, pp. 506–515, 2008. View at Publisher · View at Google Scholar · View at Scopus
  19. A. Gilat, R. K. Goldberg, and G. D. Roberts, “Experimental study of strain-rate-dependent behavior of carbon/epoxy composite,” Composites Science and Technology, vol. 62, no. 10-11, pp. 1469–1476, 2002. View at Publisher · View at Google Scholar · View at Scopus
  20. A. Martin, R. Othman, and P. Rozycki, “Experimental investigation of quasi-static and intermediate strain rate behaviour of polypropylene glass fibre (PPGF) woven composite,” Plastics, Rubber and Composites, vol. 44, no. 1, pp. 1–10, 2015. View at Publisher · View at Google Scholar · View at Scopus
  21. B. C. Ray, “Effects of changing environment and loading speed on mechanical behavior of FRP composites,” Journal of Reinforced Plastics and Composites, vol. 25, no. 12, pp. 1227–1240, 2006. View at Publisher · View at Google Scholar · View at Scopus
  22. S. Kato, H. Minami, T. Yoshino et al., “Visco-inelastic constitutive equations for fabric membranes based on fabric lattice model-simulations for creep and relaxation compared with experiments,” in Research Report on Membrane Structures, pp. 29–43, The Membrane Structures Association of Japan, Tokyo, Japan, 1996. View at Google Scholar
  23. L. Meng and M.-E. Wu, “Study on stress relaxation and creep properties of PTFE membrane,” Journal of Building Materials, vol. 15, no. 2, pp. 206–210, 2012. View at Publisher · View at Google Scholar · View at Scopus
  24. W.-R. Yu, M. S. Kim, and J. S. Lee, “Modeling of anisotropic creep behavior of coated textile membranes,” Fibers and Polymers, vol. 7, no. 2, pp. 123–128, 2006. View at Publisher · View at Google Scholar · View at Scopus
  25. K. J. Kim, W.-R. Yu, and M. S. Kim, “Anisotropic creep modeling of coated textile membrane using finite element analysis,” Composites Science and Technology, vol. 68, no. 7-8, pp. 1688–1696, 2008. View at Publisher · View at Google Scholar · View at Scopus
  26. M. Lei, Stress Analysis of the Equilibrium Surface for Membrane Structures by Considering Viscoelastic Properties of Coated Fabrics, Tongji University, Shanghai, China, 2013.
  27. Y. Li and M. Wu, “Uniaxial creep property and viscoelastic–plastic modelling of ethylene tetrafluoroethylene (ETFE) foil,” Mechanics of Time-Dependent Materials, vol. 19, no. 1, pp. 21–34, 2015. View at Publisher · View at Google Scholar · View at Scopus
  28. Y. Zhang, S. Xu, Q. Zhang, and Y. Zhou, “Experimental and theoretical research on the stress-relaxation behaviors of PTFE coated fabrics under different temperatures,” Advances in Materials Science and Engineering, vol. 2015, Article ID 319473, 12 pages, 2015. View at Publisher · View at Google Scholar · View at Scopus
  29. J. Fujiwara, M. Ohsaki, and K. Uetani, “Cutting pattern design of membrane structures considering viscoelasticity of material,” in Proceedings of the IASS Symposium, pp. 112–113, Nagoy, Japan, October 2001.
  30. H. Nakajima, M. Saitoh, and A. Okada, “Structure analytical study on stress relaxation in tensile membrane structures-structural principle on tensile membrane structure with spring-strut system,” in Research Report on Membrane Structures '07, pp. 15–25, The Membrane Structures Association of Japan, Tokyo, Japan, 2007. View at Google Scholar
  31. S. Kato and T. Yoshino, “Simulation for introducing tensions into curved membranes considering both of the cutting pattern method and visco-elasto-plastic characteristics of the fabrics,” in Proceedings of the IASS Symposium, pp. 110–111, International Association for Shell and Spatial Structures, Nagoya, Japan, 2001.
  32. DIN, “Testing of artificial leather-tensile test,” DIN 53354, 1981. View at Google Scholar
  33. A. K. Sen, Coated Textiles: Principles and Applications, CRC Press, 2nd edition, 2007. View at Publisher · View at Google Scholar
  34. Y. Wang, X. G. Chen, R. Young, and I. Kinloch, “Finite element analysis of effect of inter-yarn friction on ballistic impact response of woven fabrics,” Composite Structures, vol. 135, pp. 8–16, 2016. View at Publisher · View at Google Scholar · View at Scopus
  35. H. Wang and Z.-W. Wang, “Quantification of effects of stochastic feature parameters of yarn on elastic properties of plain-weave composite. Part 1: theoretical modeling,” Composites Part A: Applied Science and Manufacturing, vol. 78, pp. 84–94, 2015. View at Publisher · View at Google Scholar · View at Scopus
  36. H. Y. Yeh and L. T. Kilfoy, “A simple comparison of macroscopic failure criteria for advanced fiber reinforced composites,” Journal of Reinforced Plastics and Composites, vol. 17, no. 5, pp. 406–445, 1998. View at Google Scholar · View at Scopus
  37. S. W. Tsai, “Survey of macroscopic failure criteria for composite materials,” Journal of Reinforced Plastics and Composites, vol. 3, no. 1, pp. 40–62, 1984. View at Publisher · View at Google Scholar · View at Scopus
  38. C. C. Chamis, “Polymer composite mechanics review—1965 to 2006,” Journal of Reinforced Plastics & Composites, vol. 26, no. 10, pp. 987–1019, 2007. View at Publisher · View at Google Scholar · View at Scopus
  39. F. París, “A study of failure criteria of fibrous composite materials,” Tech. Rep. NASA/CR-2001-210661, NASA Langley Research Center, Hampton, Va, USA, 2001. View at Google Scholar
  40. J. Echaabi, F. Trochu, and R. Gauvin, “Review of failure criteria of fibrous composite materials,” Polymer Composites, vol. 17, no. 6, pp. 786–796, 1996. View at Publisher · View at Google Scholar · View at Scopus
  41. H.-Y. Yeh and C. H. Kim, “The Yeh-Stratton criterion for composite materials,” Journal of Composite Materials, vol. 28, no. 10, pp. 926–939, 1994. View at Publisher · View at Google Scholar · View at Scopus
  42. Z. Hashin, “Failure criteria for unidirectional fiber composites,” Journal of Applied Mechanics, vol. 48, no. 4, pp. 846–852, 1981. View at Publisher · View at Google Scholar · View at Scopus