Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2017, Article ID 2435079, 8 pages
https://doi.org/10.1155/2017/2435079
Research Article

Modeling the Influence of the Penetration Channel’s Shape on Plasma Parameters When Handling Highly Concentrated Energy Sources

1Department of Welding, Metrology, and Materials Technology, Perm National Research Polytechnic University, Komsomolskiy Prospekt, No. 29, Perm 614099, Russia
2Department of Automation and Telematics, Perm National Research Polytechnic University, Komsomolskiy Prospekt, No. 29, Perm 614099, Russia
3Department of Mechanical Engineering, Rapid Manufacturing Laboratory, Indian Institute of Technology Bombay, Powai, Mumbai 400076, India

Correspondence should be addressed to Dmitriy N. Trushnikov; ur.xednay@rtimidrt

Received 2 July 2017; Accepted 24 August 2017; Published 12 October 2017

Academic Editor: Michael Aizenshtein

Copyright © 2017 Dmitriy N. Trushnikov et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. W. Wang, S. Yamane, T. Koike et al., “Image processing method for automatic tracking of the weld line in plasma robotic welding,” The International Journal of Advanced Manufacturing Technology, vol. 86, no. 5, pp. 1865–1872, 2016. View at Publisher · View at Google Scholar · View at Scopus
  2. I. A. Krinberg and G. M. Mladenov, “Formation and expansion of the plasma column under electron beam-metal interaction,” Vacuum, vol. 77, no. 4, pp. 407–411, 2005. View at Publisher · View at Google Scholar · View at Scopus
  3. C. Y. Ho, M. Y. Wen, and C. Ma, “Plasma from EB evaporation of a metal target,” Advances in Materials and Processing Technologies, vol. 83, pp. 190–1196, 2010. View at Google Scholar
  4. V. V. Novokreshchenov, R. V. Rodyakina, Y. V. Myakishev, and A. P. Sliva, “Determination of the degree of ionization of the vapour phase of the penetration channel in electron beam welding,” Welding International, vol. 27, no. 3, pp. 238–242, 2013. View at Publisher · View at Google Scholar · View at Scopus
  5. V. Y. Belen’kii and V. M. Yazovskikh, “Control of electron beam welding using plasma phenomena in the molten pool region,” Welding International, vol. 11, no. 7, pp. 554–556, 1997. View at Publisher · View at Google Scholar · View at Scopus
  6. V. Ya. Belenkii, V. M. Yazovskikh, and A. P. Zhuravlev, “Nature of the secondary current in the plasma formed in the zone affected by the electron beam during welding,” Physics and Chemistry of Materials Treatment, vol. 11, no. 6, pp. 128–131, 1984. View at Google Scholar
  7. G. L. Mara and R. C. McMaster, “Method for producing spikefree electron beam partial penetration welds,” Welding Research Supplement, vol. 53, no. 6, pp. 246–251, 1974. View at Google Scholar
  8. R. Mayer, W. Dietrich, and D. Sundemeyer, “New high-speed beam current control and deflection system improve electron beam welding application,” Welding Journal, vol. 56, no. 6, pp. 35–41, 1977. View at Google Scholar · View at Scopus
  9. H. Schwarz, “Power density of optimally focused space-charge-limited electron beams,” Journal of Applied Physics, vol. 33, no. 12, pp. 3464–3470, 1962. View at Publisher · View at Google Scholar · View at Scopus
  10. V. Dey, D. K. Pratihar, G. L. Datta, M. N. Jha, T. K. Saha, and A. V. Bapat, “Optimization of bead geometry in electron beam welding using a genetic algorithm,” Journal of Materials Processing Technology, vol. 209, no. 3, pp. 1151–1157, 2009. View at Publisher · View at Google Scholar · View at Scopus
  11. U. Dilthey, A. Goumeniouk, V. Lopota, and G. Turichin, “Kinetic description of keyhole plasma in laser welding,” Journal of Physics D: Applied Physics, vol. 33, no. 21, pp. 2747–2753, 2000. View at Publisher · View at Google Scholar · View at Scopus
  12. D. N. Trushnikov and G. M. Mladenov, “Numerical model of the plasma formation at electron beam welding,” Journal of Applied Physics, vol. 117, no. 1, Article ID 013301, 2015. View at Publisher · View at Google Scholar · View at Scopus
  13. A. Arora, Y. V. Hote, and M. Rastogi, “Design of PID controller for unstable system,” Communications in Computer and Information Science, vol. 140, pp. 19–26, 2011. View at Publisher · View at Google Scholar · View at Scopus
  14. D. Trushnikov, V. Belenkiy, V. Shchavlev, A. Piskunov, A. Abdullin, and G. Mladenov, “Plasma charge current for controlling and monitoring electron beam welding with beam oscillation,” Sensors, vol. 12, no. 12, pp. 17433–17445, 2012. View at Publisher · View at Google Scholar · View at Scopus
  15. Y. P. Raizer and J. E. Allen, Gas Discharge Physics, Springer Berlin Heidelberg, Berlin, Heidelberg, 1991. View at Publisher · View at Google Scholar
  16. A. D. Richards, B. E. Thompson, and H. H. Sawin, “Continuum modeling of argon radio frequency glow discharges,” Applied Physics Letters, vol. 50, no. 9, pp. 492–494, 1987. View at Publisher · View at Google Scholar · View at Scopus
  17. M. A. Lieberman and A. J. Lichtenberg, Principles of Plasma Discharges and Materials Processing, John Wiley & Sons, Inc., Hoboken, NJ, USA, 2005. View at Publisher · View at Google Scholar
  18. R. B. Bird, W. E. Stewart, and E. N. Lightfoot, Transport Phenomena, John Wiley and Sons, 2002.
  19. G. J. M. Hagelaar, “Modeling of microdischarges for display technology,” Technische Universiteit Eindhoven, 109 pages, 2000. View at Google Scholar
  20. R. S. Brokaw, “Predicting transport properties of dilute gases,” Industrial & Engineering Chemistry Process Design and Development, vol. 8, no. 2, pp. 240–253, 1969. View at Publisher · View at Google Scholar · View at Scopus
  21. D. Trushnikov, E. Krotova, and E. Koleva, “Use of a secondary current sensor in plasma during electron-beam welding with focus scanning for process control,” Journal of Sensors, vol. 2016, Article ID 5302681, 2016. View at Publisher · View at Google Scholar · View at Scopus
  22. R. Rai, T. A. Palmer, J. W. Elmer, and T. DebRoy, “Heat transfer and fluid flow during electron beam welding of 304l stainless steel alloy,” Welding Journal, vol. 88, no. 3, pp. 54–61, 2009. View at Google Scholar
  23. V. Y. Braverman, D. A. Skurikhin, S. G. Bayakin, V. F. Shabanov, and V. V. Bashenko, “A device for controlling focusing and penetration depth on the basis of inherent X-radiation in electron beam welding with modulation of the focusing level,” Welding International, vol. 11, no. 7, pp. 560–563, 1997. View at Publisher · View at Google Scholar · View at Scopus
  24. D. N. Trushnikov, G. M. Mladenov, and V. Y. Belenkiy, “Controlling the electron beam focus regime and monitoring the keyhole in electron beam welding,” Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society, vol. 31, no. 4, 2013. View at Publisher · View at Google Scholar · View at Scopus