Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2017 (2017), Article ID 2759020, 12 pages
https://doi.org/10.1155/2017/2759020
Research Article

Prediction Model of Cutting Parameters for Turning High Strength Steel Grade-H: Comparative Study of Regression Model versus ANFIS

1Department of Mechanical Engineering, College of Engineering, King Saud University, P.O. Box 800, Riyadh 11421, Saudi Arabia
2Department of Industrial Engineering, College of Engineering, King Saud University, P.O. Box 800, Riyadh 11421, Saudi Arabia

Correspondence should be addressed to Adel T. Abbas; moc.oohay@4591sabbata

Received 5 January 2017; Revised 27 February 2017; Accepted 2 March 2017; Published 22 March 2017

Academic Editor: Fernando Lusquiños

Copyright © 2017 Adel T. Abbas et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. UK ministry of defense report no: DEFSTAN 10-13/2005.
  2. A. T. Abbas, K. Hamza, M. F. Aly, and E. A. Al-Bahkali, “Multiobjective optimization of turning cutting parameters for J-steel material,” Advances in Materials Science and Engineering, vol. 2016, Article ID 6429160, 8 pages, 2016. View at Publisher · View at Google Scholar · View at Scopus
  3. B. Bhardwaj, R. Kumar, and P. K. Singh, “Surface roughness (Ra) prediction model for turning of AISI 1019 steel using response surface methodology and Box–Cox transformation,” Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, vol. 228, no. 2, pp. 223–232, 2014. View at Publisher · View at Google Scholar · View at Scopus
  4. R. Mokhtari Homami, A. Fadaei Tehrani, H. Mirzadeh, B. Movahedi, and F. Azimifar, “Optimization of turning process using artificial intelligence technology,” International Journal of Advanced Manufacturing Technology, vol. 70, no. 5–8, pp. 1205–1217, 2014. View at Publisher · View at Google Scholar · View at Scopus
  5. I. Svalina, G. Šimunović, T. Šarić, and R. Lujić, “Evolutionary neuro-fuzzy system for surface roughness evaluation,” Applied Soft Computing, vol. 52, pp. 593–604, 2017. View at Publisher · View at Google Scholar
  6. S. Jović, N. Arsić, V. Vukojević, O. Anicic, and S. Vujičić, “Determination of the important machining parameters on the chip shape classification by adaptive neuro-fuzzy technique,” Precision Engineering, vol. 48, pp. 18–23, 2017. View at Publisher · View at Google Scholar
  7. T.-L. (Bill) Tsenga, U. Konadaa, and Y. (James) Kwonb, “A novel approach to predict surface roughness in machining operations using fuzzy set theory,” Journal of Computational Design and Engineering, vol. 3, no. 1, pp. 1–13, 2016. View at Publisher · View at Google Scholar
  8. G. Kant and K. S. Sangwan, “Predictive modelling and optimization of machining parameters to minimize surface roughness using artificial neural network coupled with genetic algorithm,” in Proceedings of the 15th CIRP Conference on Modelling of Machining Operations (CMMO '15), vol. 31, pp. 453–458, June 2015. View at Publisher · View at Google Scholar · View at Scopus
  9. K. Raja, P. Marimuthu, and K. Chandrasekaran, “Performance study on AISI316 and AISI410 using different layered coated cutting tools in CNC turning,” Journal of Engineering Science and Technology, vol. 10, no. 1, pp. 25–34, 2015. View at Google Scholar · View at Scopus
  10. K. Chandrasekarana, P. Marimuthu, and K. Raja, “Prediction model for CNC turning on AISI316 with single and multilayered cutting tool using Box Behnken Design,” International Journal of Engineering, Transactions A: Basics, vol. 26, no. 4, pp. 401–410, 2013. View at Publisher · View at Google Scholar · View at Scopus
  11. F. Jafarian, M. Taghipour, and H. Amirabadi, “Application of artificial neural network and optimization algorithms for optimizing surface roughness, tool life and cutting forces in turning operation,” Journal of Mechanical Science and Technology, vol. 27, no. 5, pp. 1469–1477, 2013. View at Publisher · View at Google Scholar · View at Scopus
  12. D. M. D 'Addona and S. J. Raykar, “Analysis of surface roughness in hard turning using wiper insert geometry,” Procedia CIRP, vol. 41, pp. 841–846, 2016. View at Google Scholar
  13. G. M. A. Acayaba and P. M. D. Escalona, “Prediction of surface roughness in low speed turning of AISI316 austenitic stainless steel,” CIRP Journal of Manufacturing Science and Technology, vol. 11, pp. 62–67, 2015. View at Publisher · View at Google Scholar · View at Scopus
  14. S. Sahu and B. B. Choudhury, “Optimization of surface roughness using taguchi methodology & prediction of tool wear in hard turning tools,” Materials Today: Proceedings, vol. 2, no. 4-5, pp. 2615–2623, 2015. View at Publisher · View at Google Scholar
  15. A. Agrawal, S. Goel, W. B. Rashid, and M. Price, “Prediction of surface roughness during hard turning of AISI 4340 steel (69 HRC),” Applied Soft Computing, vol. 30, pp. 279–286, 2015. View at Publisher · View at Google Scholar · View at Scopus
  16. M. Azam, M. Jahanzaib, A. Wasim, and S. Hussain, “Surface roughness modeling using RSM for HSLA steel by coated carbide tools,” International Journal of Advanced Manufacturing Technology, vol. 78, no. 5–8, pp. 1031–1041, 2015. View at Publisher · View at Google Scholar · View at Scopus
  17. M. Mia and N. R. Dhar, “Prediction of surface roughness in hard turning under high pressure coolant using Artificial Neural Network,” Measurement: Journal of the International Measurement Confederation, vol. 92, pp. 464–474, 2016. View at Publisher · View at Google Scholar · View at Scopus
  18. C. L. He, W. J. Zong, Z. M. Cao, and T. Sun, “Theoretical and empirical coupled modeling on the surface roughness in diamond turning,” Materials and Design, vol. 82, pp. 216–222, 2015. View at Publisher · View at Google Scholar · View at Scopus
  19. E. A. Al Bahkali, A. E. Ragab, E. A. El Danaf, and A. T. Abbas, “An investigation of optimum cutting conditions in turning nodular cast iron using carbide inserts with different nose radius,” Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, vol. 230, no. 9, pp. 1584–1591, 2016. View at Publisher · View at Google Scholar
  20. J.-S. R. Jang, “ANFIS: adaptive-network-based fuzzy inference system,” IEEE Transactions on Systems, Man and Cybernetics, vol. 23, no. 3, pp. 665–685, 1993. View at Publisher · View at Google Scholar · View at Scopus