Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2017 (2017), Article ID 3192672, 11 pages
https://doi.org/10.1155/2017/3192672
Research Article

Intelligent Machine Vision Based Modeling and Positioning System in Sand Casting Process

1School of Mechanical & Manufacturing Engineering, National University of Sciences and Technology (NUST), Islamabad, Pakistan
2Directorate of Quality Assurance, National University of Sciences and Technology (NUST), Islamabad, Pakistan
3School of Mechanical Engineering, Beijing Institution of Technology, Beijing, China

Correspondence should be addressed to Shahid Ikramullah Butt; kp.ude.tsun.emms@dihahsrd

Received 21 October 2016; Revised 31 December 2016; Accepted 16 January 2017; Published 8 February 2017

Academic Editor: Charles C. Sorrell

Copyright © 2017 Shahid Ikramullah Butt et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. H. Kosler, U. Pavlovčič, M. Jezeršek, and J. Možina, “Adaptive robotic deburring of die-cast parts with position and orientation measurements using a 3D laser-triangulation sensor,” SV-Journal of Mechanical Engineering, vol. 4, pp. 207–212, 2016. View at Google Scholar
  2. E. Neuman and D. Trauzeddel, “Pouring systems for ferrous applications,” Foundry Trade Journal, pp. 23–24, 2002. View at Google Scholar
  3. A. Ito, Y. Noda, and K. Terashima, “High-precision liquid pouring control while keeping lower ladle position and avoiding clash with mold,” in Proceedings of the IEEE International Conference on Control Applications (CCA '12), pp. 246–251, Dubrovnik, Croatia, October 2012. View at Publisher · View at Google Scholar · View at Scopus
  4. X. Zhu, R. Chen, and Y. Zhang, “Automatic defect detection in spring clamp production via machine vision,” Abstract and Applied Analysis, vol. 2014, Article ID 164726, 9 pages, 2014. View at Publisher · View at Google Scholar · View at Scopus
  5. L.-H. Zou, C. Jie, Z. Juan, and L.-H. Dou, “The comparison of two typical corner detection algorithms,” in Proceedings of the 2nd International Symposium on Intelligent Information Technology Application (IITA '08), vol. 2, pp. 211–215, Shanghai, China, December 2008. View at Publisher · View at Google Scholar · View at Scopus
  6. Y. Choe, H.-C. Lee, Y.-J. Kim, D.-H. Hong, S.-S. Park, and M.-T. Lim, “Vision-based estimation of bolt-hole location using circular hough transform,” in Proceedings of the ICROS-SICE International Joint Conference, pp. 4821–4826, Fukuoka International Congress Center, Fukuoka, Japan, August 2009.
  7. Z. Zhifeng, “Measuring diameter of non-threaded hex bolts based on hough transform,” in Proceedings of the 3rd International Conference on Measuring Technology and Mechatronics Automation (ICMTMA '11), pp. 526–528, Shanghai, China, 2011.
  8. U. Asgher, R. Ahmad, and S. I. Butt, “Mathematical modeling of manufacturing process plan, optimization analysis with stochastic and DSM modeling techniques,” Advanced Materials Research, vol. 816-817, pp. 1174–1180, 2013. View at Publisher · View at Google Scholar · View at Scopus
  9. Y. Noda, K. Terashima, M. Suzuki, and H. Makino, “Weight control of pouring liquid by automatic pouring robot,” in Proceedings of the IFAC Workshop on Automation in Mining, Mineral and Metal Processing, vol. 70, pp. 1–6, Vina del Mar, Chile, 2009.
  10. Y. Noda and K. Terashima, “Modeling and feedforward flow rate control of automatic pouring system with real ladle,” Journal of Robotics and Mechatronics, vol. 19, no. 2, pp. 205–211, 2007. View at Publisher · View at Google Scholar
  11. A. Wilson, Ed., System Checks Plastic Molding Consistency, 2007, http://www.vision-systems.com/articles/print/volume-12/issue-2/features/profile-in-industry-solutions/system-checks-plastic-molding-consistency.html.
  12. U. Asgher, H. Muhammad, M. M. Hamza, R. Ahmad, S. I. Butt, and M. Jamil, “Robust hybrid normalized convolution and forward error correction in image reconstruction,” in Proceedings of the 10th International Conference on Innovations in Information Technology (IIT '14), pp. 54–59, Al-Ain, UAE, November 2014. View at Publisher · View at Google Scholar · View at Scopus
  13. J. Chi, L. Liu, J. Liu, Z. Jiang, and G. Zhang, “Machine vision based automatic detection method of indicating values of a pointer gauge,” Mathematical Problems in Engineering, vol. 2015, Article ID 283629, 19 pages, 2015. View at Publisher · View at Google Scholar · View at Scopus
  14. H. M. Yip, J. C. Li, K. Xie et al., “Automated long-term monitoring of parallel microfluidic operations applying a machine vision-assisted positioning method,” The Scientific World Journal, vol. 2014, Article ID 608184, 14 pages, 2014. View at Publisher · View at Google Scholar
  15. S. Srivastava, S. Boyat, and S. Sadistap, “A robust machine vision algorithm development for quality parameters extraction of circular biscuits and cookies digital images,” Journal of Food Processing, vol. 2014, Article ID 376360, 13 pages, 2014. View at Publisher · View at Google Scholar