Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2017 (2017), Article ID 3247873, 9 pages
https://doi.org/10.1155/2017/3247873
Research Article

Investigation on Surface Roughness of Inconel 718 in Photochemical Machining

1Department of Mechanical Engineering, SVERI’s College of Engineering Pandharpur, Maharashtra 413304, India
2Department of Mechanical Engineering, Dr. Babasaheb Ambedkar Technological University, Lonere, Raigad, Maharashtra 402103, India

Correspondence should be addressed to Nitin D. Misal

Received 26 August 2016; Accepted 27 December 2016; Published 29 January 2017

Academic Editor: Patrice Berthod

Copyright © 2017 Nitin D. Misal and Mudigonda Sadaiah. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Nitin D. Misal and Mudigonda Sadaiah, “Investigation on Surface Roughness of Inconel 718 in Photochemical Machining,” Advances in Materials Science and Engineering, vol. 2017, Article ID 3247873, 9 pages, 2017. doi:10.1155/2017/3247873