Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2017 (2017), Article ID 3247873, 9 pages
https://doi.org/10.1155/2017/3247873
Research Article

Investigation on Surface Roughness of Inconel 718 in Photochemical Machining

1Department of Mechanical Engineering, SVERI’s College of Engineering Pandharpur, Maharashtra 413304, India
2Department of Mechanical Engineering, Dr. Babasaheb Ambedkar Technological University, Lonere, Raigad, Maharashtra 402103, India

Correspondence should be addressed to Nitin D. Misal; moc.liamg@27lasim.nitin

Received 26 August 2016; Accepted 27 December 2016; Published 29 January 2017

Academic Editor: Patrice Berthod

Copyright © 2017 Nitin D. Misal and Mudigonda Sadaiah. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. D. M. Allen, The Principles and Practice of Photochemical Machining and Photoetching, Adam Hilger, IOP, Bristol, UK, 1986.
  2. D. M. Allen, “Photochemical machining: from ‘manufacturing’s best kept secret' to a $6 billion per annum, rapid manufacturing process,” CIRP Annals—Manufacturing Technology, vol. 53, no. 2, pp. 559–572, 2004. View at Publisher · View at Google Scholar · View at Scopus
  3. F. Fareh, V. Demers, N. R. Demarquette, S. Turenne, and O. Scalzo, “Molding properties of inconel 718 feedstocks used in low-pressure powder injection molding,” Advances in Materials Science and Engineering, vol. 2016, Article ID 7078045, 7 pages, 2016. View at Publisher · View at Google Scholar · View at Scopus
  4. M. Dehmas, J. Lacaze, A. Niang, and B. Viguier, “TEM study of high-temperature precipitation of delta phase in inconel 718 alloy,” Advances in Materials Science and Engineering, vol. 2011, Article ID 940634, 9 pages, 2011. View at Publisher · View at Google Scholar · View at Scopus
  5. A. R. Saraf and M. Sadaiah, “Magnetic field-assisted photochemical machining (MFAPCM) of SS316L,” Materials and Manufacturing Processes, vol. 32, no. 3, pp. 327–332, 2016. View at Publisher · View at Google Scholar
  6. D. H. Patil and S. Mudigonda, “The effect of the rolling direction, temperature, and etching time on the photochemical machining of monel 400 microchannels,” Advances in Materials Science and Engineering, vol. 2016, Article ID 6751305, 9 pages, 2016. View at Publisher · View at Google Scholar
  7. N. S. Qu, Y. Hu, D. Zhu, and Z. Y. Xu, “Electrochemical machining of blisk channels with progressive-pressure electrolyte flow,” Materials and Manufacturing Processes, vol. 29, no. 5, pp. 572–578, 2014. View at Publisher · View at Google Scholar · View at Scopus
  8. A. A. G. Bruzzone and A. P. Reverberi, “An experimental evaluation of an etching simulation model for photochemical machining,” CIRP Annals—Manufacturing Technology, vol. 59, no. 1, pp. 255–258, 2010. View at Publisher · View at Google Scholar · View at Scopus
  9. O. Çakir, “Chemical etching of aluminium,” Journal of Materials Processing Technology, vol. 199, no. 1, pp. 337–340, 2008. View at Publisher · View at Google Scholar · View at Scopus
  10. S. Ho, T. Nakahara, and G. D. Hibbard, “Chemical machining of nanocrystalline Ni,” Journal of Materials Processing Technology, vol. 208, no. 1–3, pp. 507–513, 2008. View at Publisher · View at Google Scholar · View at Scopus
  11. O. Çakir, H. Temel, and M. Kiyak, “Chemical etching of Cu-ETP copper,” Journal of Materials Processing Technology, vol. 162-163, pp. 275–279, 2005. View at Publisher · View at Google Scholar · View at Scopus
  12. D. M. Allen and H. J. A. Almond, “Characterisation of aqueous ferric chloride etchants used in industrial photochemical machining,” Journal of Materials Processing Technology, vol. 149, no. 1–3, pp. 238–245, 2004. View at Publisher · View at Google Scholar · View at Scopus
  13. R. P. Yadav and S. N. Teli, “A Review of issues in photochemical machining,” International Journal of Modern Engineering Research, vol. 4, no. 7, pp. 49–53, 2014. View at Google Scholar
  14. O. Cakir, “Copper etching with cupric chloride and regeneration of waste etchant,” Journal of Materials Processing Technology, vol. 175, no. 1–3, pp. 63–68, 2006. View at Publisher · View at Google Scholar · View at Scopus
  15. A. B. Bhasme and M. S. Kadam, “Parameter optimization by using grey relational analysis of photochemical machining,” International Research Journal of Engineering and Technology, vol. 3, no. 3, pp. 992–997, 2016. View at Google Scholar
  16. A. B. Bhasme and M. S. Kadam, “Experimental investigation of PCM using response surface methodology on SS316L steel,” International Journal of Mechanical Engineering and Technology, vol. 7, no. 2, pp. 25–32, 2016. View at Google Scholar
  17. P. Mumbare and A. J. Gujar, “Multi objective optimization of photoche-mical machining for ASME 316 steel using grey relational analysis,” International Journal of Innovative Research in Science, Engineering and Technology, vol. 5, no. 7, pp. 12418–12425, 2016. View at Google Scholar
  18. S. S. Wangikar, P. K. Patowari, and R. D. Misra, “Effect of process parameters and optimization for photochemical machining of brass and german silver,” Materials and Manufacturing Processes, pp. 1–9, 2016. View at Publisher · View at Google Scholar