Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2017, Article ID 3405432, 11 pages
https://doi.org/10.1155/2017/3405432
Research Article

Effect of the Lifting Velocity and Container Shape on Angle of Repose of Iron Ore Particles

Tongqing Li,1,2,3 Yuxing Peng,1,2,3 Zhencai Zhu,1,2,3 Zhangfa Yu,4 and Zixin Yin1,2,3

1School of Mechatronic Engineering, China University of Mining and Technology, Xuzhou 221116, China
2Jiangsu Key Laboratory of Mine Mechanical and Electrical Equipment, China University of Mining and Technology, Xuzhou 221116, China
3Jiangsu Collaborative Innovation Center of Intelligent Mining Equipment, Xuzhou, China
4State Key Laboratory of Mining Heavy Equipment, CITIC Heavy Industries Co., Ltd., Luoyang 471000, China

Correspondence should be addressed to Yuxing Peng; moc.621@tmucgnixuygnep

Received 25 May 2017; Revised 6 September 2017; Accepted 28 September 2017; Published 23 October 2017

Academic Editor: Alain Portavoce

Copyright © 2017 Tongqing Li et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Tongqing Li, Yuxing Peng, Zhencai Zhu, Zhangfa Yu, and Zixin Yin, “Effect of the Lifting Velocity and Container Shape on Angle of Repose of Iron Ore Particles,” Advances in Materials Science and Engineering, vol. 2017, Article ID 3405432, 11 pages, 2017. https://doi.org/10.1155/2017/3405432.