Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2017, Article ID 3405432, 11 pages
https://doi.org/10.1155/2017/3405432
Research Article

Effect of the Lifting Velocity and Container Shape on Angle of Repose of Iron Ore Particles

Tongqing Li,1,2,3 Yuxing Peng,1,2,3 Zhencai Zhu,1,2,3 Zhangfa Yu,4 and Zixin Yin1,2,3

1School of Mechatronic Engineering, China University of Mining and Technology, Xuzhou 221116, China
2Jiangsu Key Laboratory of Mine Mechanical and Electrical Equipment, China University of Mining and Technology, Xuzhou 221116, China
3Jiangsu Collaborative Innovation Center of Intelligent Mining Equipment, Xuzhou, China
4State Key Laboratory of Mining Heavy Equipment, CITIC Heavy Industries Co., Ltd., Luoyang 471000, China

Correspondence should be addressed to Yuxing Peng; moc.621@tmucgnixuygnep

Received 25 May 2017; Revised 6 September 2017; Accepted 28 September 2017; Published 23 October 2017

Academic Editor: Alain Portavoce

Copyright © 2017 Tongqing Li et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. K. Zhang, A. Nieto, and A. N. Kleit, “The real option value of mining operations using mean-reverting commodity prices,” Mineral Economics, vol. 28, no. 1-2, pp. 11–22, 2015. View at Publisher · View at Google Scholar · View at Scopus
  2. K. Zhang and A. N. Kleit, “Mining rate optimization considering the stockpiling: A theoretical economics and real option model,” Resources Policy, vol. 47, pp. 87–94, 2016. View at Publisher · View at Google Scholar · View at Scopus
  3. L. G. Austin, R. R. Klimpel, and P. T. Luckie, “Process Engineering of Size Reduction: Ball Milling,” in Institute of Mining, Metallurgical, and Petroleum Engineers, pp. 1–38, American Institute of Mining, New Jersey, NJ, USA, 1984. View at Google Scholar
  4. F. S. Hoseinian, R. S. Faradonbeh, A. Abdollahzadeh, B. Rezai, and S. Soltani-Mohammadi, “Semi-autogenous mill power model development using gene expression programming,” Powder Technology, vol. 308, pp. 61–69, 2017. View at Publisher · View at Google Scholar · View at Scopus
  5. R. E. McIvor, “Correspondence to mill power draw paper,” Minerals Engineering, vol. 108, pp. 31–35, 2017. View at Publisher · View at Google Scholar · View at Scopus
  6. L. S. Bbosa, I. Govender, and A. Mainza, “Development of a novel methodology to determine mill power draw,” International Journal of Mineral Processing, vol. 149, pp. 94–103, 2016. View at Publisher · View at Google Scholar · View at Scopus
  7. I. Govender, “Granular flows in rotating drums: A rheological perspective,” Minerals Engineering, vol. 92, pp. 168–175, 2016. View at Publisher · View at Google Scholar · View at Scopus
  8. I. Govender and M. S. Powell, “An empirical power model derived from 3D particle tracking experiments,” Minerals Engineering, vol. 19, no. 10, pp. 1005–1012, 2006. View at Publisher · View at Google Scholar · View at Scopus
  9. Y. C. Zhou, B. H. Xu, A. B. Yu, and P. Zulli, “An experimental and numerical study of the angle of repose of coarse spheres,” Powder Technology, vol. 125, no. 1, pp. 45–54, 2002. View at Publisher · View at Google Scholar · View at Scopus
  10. A. P. Grima and P. W. Wypych, “Investigation into calibration of discrete element model parameters for scale-up and validation of particle-structure interactions under impact conditions,” Powder Technology, vol. 212, no. 1, pp. 198–209, 2011. View at Publisher · View at Google Scholar · View at Scopus
  11. T.-T. Ng, “Input parameters of discrete element methods,” Journal of Engineering Mechanics, vol. 132, no. 7, pp. 723–729, 2006. View at Publisher · View at Google Scholar · View at Scopus
  12. Z. Yan, S. K. Wilkinson, E. H. Stitt, and M. Marigo, “Discrete element modelling (DEM) input parameters: understanding their impact on model predictions using statistical analysis,” Computational Particle Mechanics, vol. 2, no. 3, pp. 283–299, 2015. View at Publisher · View at Google Scholar
  13. S. K. Wilkinson, S. A. Turnbull, Z. Yan, E. H. Stitt, and M. Marigo, “A parametric evaluation of powder flowability using a Freeman rheometer through statistical and sensitivity analysis: A discrete element method (DEM) study,” Computers & Chemical Engineering, vol. 97, pp. 161–174, 2017. View at Publisher · View at Google Scholar · View at Scopus
  14. C. J. Coetzee, “Calibration of the discrete element method and the effect of particle shape,” Powder Technology, vol. 297, pp. 50–70, 2016. View at Publisher · View at Google Scholar · View at Scopus
  15. C. Li, T. Honeyands, D. O'Dea, and R. Moreno-Atanasio, “The angle of repose and size segregation of iron ore granules: DEM analysis and experimental investigation,” Powder Technology, vol. 320, pp. 257–272, 2017. View at Publisher · View at Google Scholar
  16. B.-B. Dai, J. Yang, and C.-Y. Zhou, “Micromechanical origin of angle of repose in granular materials,” Granular Matter, vol. 19, no. 2, article 24, 2017. View at Publisher · View at Google Scholar · View at Scopus
  17. N. Cheng and K. Zhao, “Difference between static and dynamic angle of repose of uniform sediment grains,” International Journal of Sediment Research, vol. 32, pp. 149–154, 2016. View at Publisher · View at Google Scholar · View at Scopus
  18. H. Yang, B. F. Zhang, R. Li, G. Zheng, and V. Zivkovic, “Particle dynamics in avalanche flow of irregular sand particles in the slumping regime of a rotating drum,” Powder Technology, vol. 311, pp. 439–448, 2017. View at Publisher · View at Google Scholar · View at Scopus
  19. C. C. Liao, S. S. Hsiau, and S. F. Wen, “Effect of adding a small amount of liquid on density-induced wet granular segregation in a rotating drum,” Advanced Powder Technology, vol. 27, no. 4, pp. 1265–1271, 2016. View at Publisher · View at Google Scholar · View at Scopus
  20. H. Xiao, D. McDonald, Y. Fan, P. B. Umbanhowar, J. M. Ottino, and R. M. Lueptow, “Controlling granular segregation using modulated flow,” Powder Technology, vol. 312, pp. 360–368, 2017. View at Publisher · View at Google Scholar · View at Scopus
  21. J. Baxter1, U. Tüzün, D. Heyes et al., “Stratification in poured granular heaps,” Nature, vol. 391, p. 136, 1998. View at Google Scholar
  22. W. Wang, J. Zhang, S. Yang, H. Zhang, H. Yang, and G. Yue, “Experimental study on the angle of repose of pulverized coal,” Particuology, vol. 8, no. 5, pp. 482–486, 2010. View at Publisher · View at Google Scholar · View at Scopus
  23. K. E. Ileleji and B. Zhou, “The angle of repose of bulk corn stover particles,” Powder Technology, vol. 187, no. 2, pp. 110–118, 2008. View at Publisher · View at Google Scholar · View at Scopus
  24. Z. Guo, X. Chen, H. Liu, Q. Guo, X. Guo, and H. Lu, “Theoretical and experimental investigation on angle of repose of biomass-coal blends,” Fuel, vol. 116, pp. 131–139, 2014. View at Publisher · View at Google Scholar · View at Scopus
  25. P. Vangla and M. L. Gali, “Effect of particle size of sand and surface asperities of reinforcement on their interface shear behaviour,” Geotextiles and Geomembranes, vol. 44, no. 3, pp. 254–268, 2016. View at Publisher · View at Google Scholar · View at Scopus
  26. K. Dong, C. Wang, and A. Yu, “A novel method based on orientation discretization for discrete element modeling of non-spherical particles,” Chemical Engineering Science, vol. 126, pp. 500–516, 2015. View at Publisher · View at Google Scholar · View at Scopus
  27. Z. Y. Zhou, R. P. Zou, D. Pinson, and A. B. Yu, “Angle of repose and stress distribution of sandpiles formed with ellipsoidal particles,” Granular Matter, vol. 16, no. 5, pp. 695–709, 2014. View at Publisher · View at Google Scholar · View at Scopus
  28. J.-F. Ferellec and G. R. McDowell, “A method to model realistic particle shape and inertia in DEM,” Granular Matter, vol. 12, no. 5, pp. 459–467, 2010. View at Publisher · View at Google Scholar · View at Scopus
  29. D. Li, G. Liu, H. Lu, Q. Zhang, Q. Wang, and H. Yu, “Numerical simulation of different flow regimes in a horizontal rotating ellipsoidal drum,” Powder Technology, vol. 291, pp. 86–96, 2016. View at Publisher · View at Google Scholar · View at Scopus
  30. D. Li, L. Wang, Q. Wang et al., “Simulations of dynamic properties of particles in horizontal rotating ellipsoidal drums,” Applied Mathematical Modelling: Simulation and Computation for Engineering and Environmental Systems, vol. 40, no. 17-18, pp. 7708–7723, 2016. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  31. G. K. P. Barrios, R. M. de Carvalho, A. Kwade, and L. M. Tavares, “Contact parameter estimation for DEM simulation of iron ore pellet handling,” Powder Technology, vol. 248, pp. 84–93, 2013. View at Publisher · View at Google Scholar · View at Scopus
  32. A. P. Grima and P. W. Wypych, “Development and validation of calibration methods for discrete element modelling,” Granular Matter, vol. 13, no. 2, pp. 127–132, 2011. View at Publisher · View at Google Scholar · View at Scopus
  33. M. Combarros, H. J. Feise, H. Zetzener, and A. Kwade, “Segregation of particulate solids: Experiments and DEM simulations,” Particuology, vol. 12, no. 1, pp. 25–32, 2014. View at Publisher · View at Google Scholar · View at Scopus
  34. J. Liu, B. Yun, and C. Zhao, “Identification and validation of rolling friction models by dynamic simulation of sandpile formation,” International Journal of Geomechanics, vol. 12, no. 4, pp. 484–493, 2012. View at Publisher · View at Google Scholar · View at Scopus
  35. H. Chen, Y. L. Liu, X. Q. Zhao, Y. G. Xiao, and Y. Liu, “Numerical investigation on angle of repose and force network from granular pile in variable gravitational environments,” Powder Technology, vol. 283, no. 7-8, pp. 607–617, 2015. View at Publisher · View at Google Scholar · View at Scopus
  36. Y. C. Zhou, B. D. Wright, R. Y. Yang et al., “Rolling friction in the dynamic simulation of sandpile formation,” Physica A Statistical Mechanics & Its Application, vol. 269, no. 2-4, pp. 536–553, 1999. View at Publisher · View at Google Scholar
  37. M. Y. Matsuo, D. Nishiura, and H. Sakaguchi, “Geometric effect of angle of repose revisited,” Granular Matter, vol. 16, no. 4, pp. 441–447, 2014. View at Publisher · View at Google Scholar · View at Scopus
  38. B. Majidi, K. Azari, H. Alamdari, M. Fafard, and D. Ziegler, “Simulation of vibrated bulk density of anode-grade coke particles using discrete element method,” Powder Technology, vol. 261, no. 7, pp. 154–160, 2014. View at Publisher · View at Google Scholar · View at Scopus