Design of Laser Welding Parameters for Joining Ti Grade 2 and AW 5754 Aluminium Alloys Using Numerical Simulation

<div>Laboratory of laser beam welding at the Faculty of Materials Science and Technology of STU in Trnava: (a) laser workplace with 6-axis robot FANUC M-710iC/50 and (b) detail of BEO D70 focusing optics.</div>

Advances in Materials Science and Engineering

fig6

Figure 6

Figure 6: Design of Laser Welding Parameters for Joining Ti Grade 2 and AW 5754 Aluminium Alloys Using Numerical Simulation 