Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2017, Article ID 3495150, 14 pages
https://doi.org/10.1155/2017/3495150
Research Article

The Influence of Different Parameter on the Seismic Behavior of SRUHSC Frame

The State Key Laboratory of Coastal and Offshore Engineering, Dalian University of Technology, Dalian, Liaoning 116024, China

Correspondence should be addressed to Yingchao Ma; moc.361@5891oahcgniyam

Received 22 March 2017; Accepted 24 May 2017; Published 10 July 2017

Academic Editor: Charles C. Sorrell

Copyright © 2017 Yingchao Ma and Jinqing Jia. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. D. Yao, J. Jia, F. Wu, and F. Yu, “Shear performance of prestressed ultra high strength concrete encased steel beams,” Construction and Building Materials, vol. 52, pp. 194–201, 2014. View at Publisher · View at Google Scholar · View at Scopus
  2. B. A. Graybeal, Structural Behavior of Ultra-High Performance Concrete Prestressed I-Girders, Federal Highway Administration, Washington, DC, USA, 2006.
  3. B. A. Graybeal, “Flexural behavior of an ultrahigh-performance concrete I-girder,” Journal of Bridge Engineering, vol. 13, no. 6, pp. 602–610, 2008. View at Publisher · View at Google Scholar · View at Scopus
  4. E. Steinberg, “Structural reliability of prestressed UHPC flexure models for bridge girders,” Journal of Bridge Engineering, vol. 15, no. 1, pp. 65–72, 2010. View at Publisher · View at Google Scholar · View at Scopus
  5. L. Hussein and L. Amleh, “Structural behavior of ultra-high performance fiber reinforced concrete-normal strength concrete or high strength concrete composite members,” Construction and Building Materials, vol. 93, pp. 1105–1116, 2015. View at Publisher · View at Google Scholar · View at Scopus
  6. M. M. Attard and S. Setunge, “Stress-strain relationship of confined and unconfined concrete,” ACI Materials Journal, vol. 93, no. 5, pp. 432–441, 1996. View at Google Scholar · View at Scopus
  7. D. C. Kent and R. Park, “Flexural members with confined concrete,” Journal of the Structural Division, vol. 97, no. 7, pp. 1969–1990, 1971. View at Google Scholar
  8. R. Park, M. J. N. Priestley, and W. D. Gill, “Ductility of square-confined concrete columns,” ASCE Journal of the Structural Division, vol. 108, no. 4, pp. 929–950, 1982. View at Google Scholar · View at Scopus
  9. B. D. Scott, R. Park, and M. J. N. Priestley, “Stress-strain behavior of concrete confined by overlapping hoops at low and high strain rates,” Journal of the American Concrete Institute, vol. 79, no. 1, pp. 13–27, 1982. View at Google Scholar · View at Scopus
  10. Eurocode 4, Design of Composite Steel and Concrete Structures, Part 1.1: General Rules and Rules for Buildings, Brussels: Commission of European Communities, March 1992.
  11. Load and Resistance Factor Design Specification for Structural Steel Buildings, American Institution of Steel Construction (AISC), Chicago, Ill, USA, 1993.
  12. Professional Standard of the People’s Republic of China, YB 9082-2006 Technical Specification of Steel-Reinforced Concrete Structures, Metallurgical Industry Press, Beijing, China, 2012.
  13. Professional Standard of the People’s Republic of China, JBJ 138-2001 Technical Specification of Steel Reinforced Concrete Composite Structures, China Architecture & Building Press, Beijing, China, 2002.
  14. P. Gajalakshmi and H. J. Helena, “Behaviour of concrete-filled steel columns subjected to lateral cyclic loading,” Journal of Constructional Steel Research, vol. 75, pp. 55–63, 2012. View at Publisher · View at Google Scholar · View at Scopus
  15. M. Moretti and T. P. Tassios, “Behaviour of short columns subjected to cyclic shear displacements: Experimental results,” Engineering Structures, vol. 29, no. 8, pp. 2018–2029, 2007. View at Publisher · View at Google Scholar · View at Scopus
  16. J. Zhang and J. Jia, “Experimental study on seismic behavior of composite frame consisting of SRC beams and SRUHSC columns subjected to cyclic loading,” Construction and Building Materials, vol. 125, pp. 1055–1065, 2016. View at Publisher · View at Google Scholar · View at Scopus
  17. C. Chen, C. Wang, and H. Sun, “Experimental study on seismic behavior of full encased steel-concrete composite columns,” Journal of Structural Engineering, vol. 140, no. 6, Article ID 04014024, 2014. View at Publisher · View at Google Scholar · View at Scopus
  18. W. Xu, L.-H. Han, and W. Li, “Seismic performance of concrete-encased column base for hexagonal concrete-filled steel tube: Experimental study,” Journal of Constructional Steel Research, vol. 121, pp. 352–369, 2016. View at Publisher · View at Google Scholar · View at Scopus
  19. L.-H. Han, W.-D. Wang, and X.-L. Zhao, “Behaviour of steel beam to concrete-filled SHS column frames: Finite element model and verifications,” Engineering Structures, vol. 30, no. 6, pp. 1647–1658, 2008. View at Publisher · View at Google Scholar · View at Scopus
  20. A. U. Qazi, L. Ye, and X. Lu, “Passive control reinforced concrete frame mechanism with high strength reinforcements and its potential benefits against earthquakes,” Tsinghua Science and Technology, vol. 11, no. 6, pp. 640–647, 2006. View at Publisher · View at Google Scholar · View at Scopus
  21. W. Li, Q.-N. Li, and W.-S. Jiang, “Parameter study on composite frames consisting of steel beams and reinforced concrete columns,” Journal of Constructional Steel Research, vol. 77, pp. 145–162, 2012. View at Publisher · View at Google Scholar · View at Scopus
  22. C. Jin, Z. Pan, S. Meng, and Z. Qiao, “Seismic behavior of shear-critical reinforced high-strength concrete columns,” Journal of Structural Engineering (United States), vol. 141, no. 8, Article ID 04014198, 2015. View at Publisher · View at Google Scholar · View at Scopus
  23. Chinese Standard Code for Seismic Design of Buildings (GB 50011), Chinese Building Press, Beijing, China, 2010.
  24. Technical Specification of Steel-Reinforced Concrete Structures (YB9082-2006), Metallurgical Industry Press, Beijing, China, 2012.
  25. Specification of Testing Methods for Earthquake Resistant Building (JGJ 101-1996), China Architecture & Building Press, Beijing, China, 1997.
  26. H. Jiang, X. Liu, and J. Mao, “Full-scale experimental study on masonry infilled RC moment-resisting frames under cyclic loads,” Engineering Structures, vol. 91, pp. 70–84, 2015. View at Publisher · View at Google Scholar · View at Scopus
  27. F. Légeron and P. Paultre, “Behavior of high-strength concrete columns under cyclic flexure and constant axial load,” ACI Structural Journal, vol. 97, no. 4, pp. 591–601, 2000. View at Google Scholar · View at Scopus
  28. R. N. F. Carmo, H. Costa, and T. Simões, “Influence of concrete strength and transverse reinforcement yield strength on behavior of high- strength concrete columns,” ACI Structural Journal, vol. 98, no. 4, pp. 490–501, 2001. View at Google Scholar
  29. H. Ma, J. Xue, X. Zhang, and D. Luo, “Seismic performance of steel-reinforced recycled concrete columns under low cyclic loads,” Construction and Building Materials, vol. 48, pp. 229–237, 2013. View at Publisher · View at Google Scholar · View at Scopus
  30. M. N. Bugeja, J. M. Bracci, and W. P. Moore Jr., “Seismic behavior of composite RCS frame systems,” Journal of Structural Engineering, vol. 126, no. 4, pp. 429–436, 2000. View at Publisher · View at Google Scholar · View at Scopus
  31. A. S. Tawfik Essa, M. R. Kotp Badr, and A. H. El-Zanaty, “Effect of infill wall on the ductility and behavior of high strength reinforced concrete frames,” HBRC Journal, vol. 10, no. 3, pp. 258–264, 2014. View at Publisher · View at Google Scholar
  32. O. Youssf, M. A. ElGawady, and J. E. Mills, “Experimental investigation of crumb rubber concrete columns under seismic loading,” Structures, vol. 3, pp. 13–27, 2015. View at Publisher · View at Google Scholar · View at Scopus