Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2017, Article ID 5383982, 10 pages
https://doi.org/10.1155/2017/5383982
Research Article

Tensile Behavior and Cracking Pattern of an Ultra-High Performance Mortar Reinforced by Polyethylene Fiber

1School of Architecture, Chonnam National University, 77 Yongbong-ro, Buk-gu, Gwangju 61186, Republic of Korea
2Korea Railroad Research Institute, Cheoldobangmulgwan-ro 176, Uiwang, Gyeonggi-do 16105, Republic of Korea
3Department of Civil Engineering, Hannam University, Daejeon 34430, Republic of Korea

Correspondence should be addressed to Bang Yeon Lee; rk.ca.unj@eelyb

Received 13 April 2017; Revised 14 June 2017; Accepted 2 July 2017; Published 2 August 2017

Academic Editor: Enzo Martinelli

Copyright © 2017 Jeong-Il Choi et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. AFGC, Ultra-high performance fibre-reinforced concrete-interim recommendations, Association Française de Génie Civil, Paris, France, 2002.
  2. H. G. Russell and B. A. Graybeal, Ultra-high performance concrete: a state-of-the-art report for the bridge community, 2013.
  3. M. Špak, M. Kozlovská, Z. Struková, and R. Bašková, “Comparison of conventional and advanced concrete technologies in terms of construction efficiency,” Advances in Materials Science and Engineering, vol. 2016, 6 pages, 2016. View at Publisher · View at Google Scholar
  4. Z. Zhu, B. Li, and M. Zhou, “The influences of iron ore tailings as fine aggregate on the strength of ultra-high performance concrete,” Advances in Materials Science and Engineering, vol. 2015, Article ID 412878, 6 pages, 2015. View at Publisher · View at Google Scholar · View at Scopus
  5. J.-I. Choi, K.-I. Song, J.-K. Song, and B. Y. Lee, “Composite properties of high-strength polyethylene fiber-reinforced cement and cementless composites,” Composite Structures, vol. 138, pp. 116–121, 2016. View at Publisher · View at Google Scholar · View at Scopus
  6. M. Maalej and V. C. Li, “Flexural/tensile-strength ratio in engineered cementitious composites,” Journal of Materials in Civil Engineering, vol. 6, no. 4, pp. 513–528, 1994. View at Publisher · View at Google Scholar · View at Scopus
  7. S.-J. Choi, J.-I. Choi, J.-K. Song, and B. Y. Lee, “Rheological and mechanical properties of fiber-reinforced alkali-activated composite,” Construction and Building Materials, vol. 96, pp. 112–118, 2015. View at Publisher · View at Google Scholar · View at Scopus
  8. B. Y. Lee, C.-G. Cho, H.-J. Lim, J.-K. Song, K.-H. Yang, and V. C. Li, “Strain hardening fiber reinforced alkali-activated mortar - A feasibility study,” Construction and Building Materials, vol. 37, pp. 15–20, 2012. View at Publisher · View at Google Scholar · View at Scopus
  9. V. C. Li, “Tailoring ECC for special attributes: a review,” International Journal of Concrete Structures and Materials, vol. 6, no. 3, pp. 135–144, 2012. View at Publisher · View at Google Scholar · View at Scopus
  10. J.-I. Choi, B. Y. Lee, R. Ranade, V. C. Li, and Y. Lee, “Ultra-high-ductile behavior of a polyethylene fiber-reinforced alkali-activated slag-based composite,” Cement and Concrete Composites, vol. 70, pp. 153–158, 2016. View at Publisher · View at Google Scholar · View at Scopus
  11. S.-T. Kang, K.-S. Lee, J.-I. Choi, Y. Lee, B. Felekoğlu, and B. Y. Lee, “Control of tensile behavior of ultra-high performance concrete through artificial flaws and fiber hybridization,” International Journal of Concrete Structures and Materials, vol. 10, pp. 33–41, 2016. View at Publisher · View at Google Scholar · View at Scopus
  12. S.-T. Kang, J.-I. Choi, K.-T. Koh, K. S. Lee, and B. Y. Lee, “Hybrid effects of steel fiber and microfiber on the tensile behavior of ultra-high performance concrete,” Composite Structures, vol. 145, pp. 37–42, 2016. View at Publisher · View at Google Scholar · View at Scopus
  13. S. H. Park, D. J. Kim, G. S. Ryu, and K. T. Koh, “Tensile behavior of ultra high performance hybrid fiber reinforced concrete,” Cement and Concrete Composites, vol. 34, no. 2, pp. 172–184, 2012. View at Publisher · View at Google Scholar · View at Scopus
  14. A. Kamal, M. Kunieda, N. Ueda, and H. Nakamura, “Evaluation of crack opening performance of a repair material with strain hardening behavior,” Cement and Concrete Composites, vol. 30, no. 10, pp. 863–871, 2008. View at Publisher · View at Google Scholar · View at Scopus
  15. R. Ranade, V. C. Li Prof., M. D. Stults, W. F. Heard, and T. S. Rushing, “Composite properties of high-Strength, high-ductility concrete,” ACI Materials Journal, vol. 110, no. 4, pp. 413–422, 2013. View at Google Scholar · View at Scopus
  16. S. He, J. Qiu, J. Li, and E. Yang, “Strain hardening ultra-high performance concrete (SHUHPC) incorporating CNF-coated polyethylene fibers,” Cement and Concrete Research, vol. 98, pp. 50–60, 2017. View at Publisher · View at Google Scholar
  17. J. E. Funk and D. Dinger, Predictive Process Control of Crowded Particulate Suspensions: Applied to Ceramic Manufacturing, Springer Science & Business Media, 2013.
  18. JSCE, Recommendations for Design and Construction of High Performance Fiber Reinforced Cement Composites with Multiple Fine Cracks (HPFRCC), Concrete Engineering Series, Japan Society of Civil Engineers, Japan, 2008.
  19. “ASTM Standard test method for compressive strength of hydraulic cement mortars (Using 2-in. or [50-mm] cube specimens). ASTM International West Conshohocken, PA (2007)”.
  20. E.-H. Yang, Y. Yang, and V. C. Li, “Use of high volumes of fly ash to improve ECC mechanical properties and material greenness,” ACI Materials Journal, vol. 104, no. 6, pp. 620–628, 2007. View at Google Scholar · View at Scopus
  21. T. Kanda and V. C. Li, “Practical design criteria for saturated pseudo strain hardening behavior in ECC,” Journal of Advanced Concrete Technology, vol. 4, no. 1, pp. 59–72, 2006. View at Publisher · View at Google Scholar · View at Scopus
  22. M. D. Lepech and V. C. Li, “Water permeability of engineered cementitious composites,” Cement and Concrete Composites, vol. 31, no. 10, pp. 744–753, 2009. View at Publisher · View at Google Scholar · View at Scopus
  23. R. Gagné, R. François, and P. Masse, “Chloride penetration testing of cracked mortar samples. Concrete under severe conditions 1, 198–205”.
  24. S. Y. Jang, B. S. Kim, and B. H. Oh, “Effect of crack width on chloride diffusion coefficients of concrete by steady-state migration tests,” Cement and Concrete Research, vol. 41, no. 1, pp. 9–19, 2011. View at Publisher · View at Google Scholar · View at Scopus