Advances in Materials Science and Engineering / 2017 / Article / Fig 5

Research Article

The Effects of Humidity on Cast PA6G during Turning and Milling Machining

Figure 5

The relationship between surface roughness and depth of the cut for humid and dry samples at different feed rates: (a) = 100 mm/min, (b) = 120 mm/min, (c) = 140 mm/min, and (d) = 160 mm/min.
(a)
(b)
(c)
(d)

Article of the Year Award: Outstanding research contributions of 2020, as selected by our Chief Editors. Read the winning articles.