Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2017, Article ID 5824171, 14 pages
https://doi.org/10.1155/2017/5824171
Research Article

SPR Characteristics Curve and Distribution of Residual Stress in Self-Piercing Riveted Joints of Steel Sheets

1Faculty of Science, Health, Education and Engineering, University of the Sunshine Coast, Sippy Downs, QLD 4556, Australia
2Faculty of Science, Engineering and Technology, Swinburne University of Technology, Hawthorn, VIC 3122, Australia
3Australian Nuclear Science and Technology Organisation, Lucas Heights, NSW 2234, Australia
4Henrob (UK) Pty Ltd, Geebung, QLD 4034, Australia

Correspondence should be addressed to Rezwanul Haque; ua.ude.csu@euqahr

Received 10 October 2016; Revised 25 November 2016; Accepted 4 December 2016; Published 15 February 2017

Academic Editor: Paolo Ferro

Copyright © 2017 Rezwanul Haque et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. R. Haque, N. S. Williams, S. E. Blacket, and Y. Durandet, “A simple but effective model for characterizing SPR joints in steel sheet,” Journal of Materials Processing Technology, vol. 223, pp. 225–231, 2015. View at Publisher · View at Google Scholar · View at Scopus
  2. R. Haque and Y. Durandet, “Strength prediction of self-pierce riveted joint in cross-tension and lap-shear,” Materials and Design, vol. 108, pp. 666–678, 2016. View at Publisher · View at Google Scholar · View at Scopus
  3. W.-G. Drossel and M. Jäckel, “New die concept for self-pierce riveting materials with limited ductility,” Key Engineering Materials, vol. 611-612, pp. 1452–1459, 2014. View at Publisher · View at Google Scholar · View at Scopus
  4. X. He, L. Zhao, C. Deng, B. Xing, F. Gu, and A. Ball, “Self-piercing riveting of similar and dissimilar metal sheets of aluminum alloy and copper alloy,” Materials and Design, vol. 65, pp. 923–933, 2015. View at Publisher · View at Google Scholar · View at Scopus
  5. X. He, Y. Wang, Y. Lu, K. Zeng, F. Gu, and A. Ball, “Self-piercing riveting of similar and dissimilar titanium sheet materials,” International Journal of Advanced Manufacturing Technology, vol. 80, no. 9-12, pp. 2105–2115, 2015. View at Publisher · View at Google Scholar · View at Scopus
  6. G. Meschut, V. Janzen, and T. Olfermann, “Innovative and highly productive joining technologies for multi-material lightweight car body structures,” Journal of Materials Engineering and Performance, vol. 23, no. 5, pp. 1515–1523, 2014. View at Publisher · View at Google Scholar · View at Scopus
  7. P. O. Bouchard, T. Laurent, and L. Tollier, “Numerical modeling of self-pierce riveting—from riveting process modeling down to structural analysis,” Journal of Materials Processing Technology, vol. 202, no. 1–3, pp. 290–300, 2008. View at Publisher · View at Google Scholar · View at Scopus
  8. M. Grujicic, J. Snipes, S. Ramaswami, and F. Abu-Farha, “Process modeling, joint-property characterization and construction of joint connectors for mechanical fastening by self-piercing riveting,” Multidiscipline Modeling in Materials and Structures, vol. 10, no. 4, pp. 631–658, 2014. View at Publisher · View at Google Scholar · View at Scopus
  9. R. Porcaro, A. G. Hanssen, M. Langseth, and A. Aalberg, “The behaviour of a self-piercing riveted connection under quasi-static loading conditions,” International Journal of Solids and Structures, vol. 43, no. 17, pp. 5110–5131, 2006. View at Publisher · View at Google Scholar · View at Scopus
  10. X. Sun and M. A. Khaleel, “Performance optimization of self-piercing rivets through analytical rivet strength estimation,” Journal of Manufacturing Processes, vol. 7, no. 1, pp. 83–93, 2005. View at Publisher · View at Google Scholar · View at Scopus
  11. G. Di Franco, L. Fratini, A. Pasta, and V. F. Ruisi, “On the self-piercing riveting of aluminium blanks and carbon fibre composite panels,” International Journal of Material Forming, vol. 6, no. 1, pp. 137–144, 2013. View at Publisher · View at Google Scholar · View at Scopus
  12. R. Khezri and A. Melander, “Simulation of self piercing riveting of TRIP800 sheet steel in 1+1 mm thickness,” IM-2003-515, Swedish Institute for Metals Research, 2003. View at Google Scholar
  13. J. Gårdstam, “Simulation of self piercing riveting of high strength austenitic stainless steel in 1 and 2 mm sheet thickness,” IM-2004-537, Swedish Institute for Metals Research, 2004. View at Google Scholar
  14. R. Khezri and A. Melander, “New technology for self piercing riveting of TRIP800 in 1+1 and 1+2 mm sheet thickness,” Tech. Rep. IM-2003-545, Swedish Institute for Metal Research, 2003. View at Google Scholar
  15. E. Sjöström, J. Gårdstam, and R. Trinick, “Development of martensitic stainless steel rivets for applications of self piercing riveting of stainless steel sheets,” in IM-2004-536, Swedish Institute for Metals Research, 2004. View at Google Scholar
  16. D. Li, L. Han, M. Thornton, and M. Shergold, “Influence of rivet to sheet edge distance on fatigue strength of self-piercing riveted aluminium joints,” Materials Science and Engineering A, vol. 558, pp. 242–252, 2012. View at Publisher · View at Google Scholar · View at Scopus
  17. Z. Jin and P. K. Mallick, “Enhancement of fatigue life of self-piercing riveted joints by coining,” in Proceedings of the ASME International Mechanical Engineering Congress and Exposition (IMECE '02), vol. 17, pp. 417–429, New Orleans, La, USA, 2002.
  18. L. Han, K. W. Young, A. Chrysanthou, and J. M. O'Sullivan, “The effect of pre-straining on the mechanical behaviour of self-piercing riveted aluminium alloy sheets,” Materials and Design, vol. 27, no. 10, pp. 1108–1113, 2006. View at Publisher · View at Google Scholar · View at Scopus
  19. L. Huang, Y. Shi, H. Guo, and X. Su, “Fatigue behavior and life prediction of self-piercing riveted joint,” International Journal of Fatigue, vol. 88, pp. 96–110, 2016. View at Publisher · View at Google Scholar · View at Scopus
  20. X. Zhang, X. He, B. Xing et al., “Influence of heat treatment on fatigue performances for self-piercing riveting similar and dissimilar titanium, aluminium and copper alloys,” Materials and Design, vol. 97, pp. 108–117, 2016. View at Publisher · View at Google Scholar · View at Scopus
  21. X. He, I. Pearson, and K. Young, “Self-pierce riveting for sheet materials: state of the art,” Journal of Materials Processing Technology, vol. 199, no. 1, pp. 27–36, 2008. View at Publisher · View at Google Scholar · View at Scopus
  22. R. Haque, J. H. Beynon, Y. Durandet, O. Kirstein, and S. Blacket, “Feasibility of measuring residual stress profile in different self-pierce riveted joints,” Science & Technology of Welding & Joining, vol. 17, no. 1, pp. 60–68, 2012. View at Publisher · View at Google Scholar · View at Scopus
  23. R. Haque, J. Beynon, O. Kirstein, Y. C. Wong, and Y. Durandet, “Evaluation of residual stress in SPR joint by neutron diffraction,” Advanced Materials Research, vol. 409, pp. 575–580, 2012. View at Publisher · View at Google Scholar · View at Scopus
  24. R. Haque, Residual Stress and Deformation in SPR Joints of High Strength Materials, Swinburne University of Technology, 2014.
  25. R. Haque, Y. C. Wong, A. Paradowska, and Y. Durandet, “Residual stress profiles in riveted joints of steel sheets,” Science and Technology of Welding and Joining, vol. 20, no. 3, pp. 199–207, 2015. View at Publisher · View at Google Scholar · View at Scopus
  26. Bluescope, http://steelproducts.bluescopesteel.com.au/home/steel-products/metallic-coated-steel.
  27. R. Haque, J. H. Beynon, and Y. Durandet, “Characterisation of force-displacement curve in self-pierce riveting,” Science and Technology of Welding and Joining, vol. 17, no. 6, pp. 476–488, 2012. View at Publisher · View at Google Scholar · View at Scopus
  28. J. A. James and L. Edwards, “Application of robot kinematics methods to the simulation and control of neutron beam line positioning systems,” Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, vol. 571, no. 3, pp. 709–718, 2007. View at Publisher · View at Google Scholar · View at Scopus
  29. R. Haque, Y. Durandet, Y. C. Wong, A. Paradowska, J. H. Beynon, and S. Blacket, “Optimising parameters for meaningful measurement of residual strain by neutron diffraction in self-pierce riveted joints,” Science and Technology of Welding and Joining, vol. 18, no. 6, pp. 492–499, 2013. View at Publisher · View at Google Scholar · View at Scopus
  30. T. Lorentzen, M. Hutchings, P. Withers, and T. Holden, Introduction to the Characterization of Residual Stress by Neutron Diffraction, Taylor & Francis, Boca Raton, Fla, USA, 2005. View at Publisher · View at Google Scholar
  31. E. D. Doyle, Y. C. Wong, and M. I. Ripley, “Residual stress evaluation in martensitic stainless steel as a function of gas quenching pressure using thermal neutrons,” Physica B: Condensed Matter, vol. 385-386, pp. 897–899, 2006. View at Publisher · View at Google Scholar · View at Scopus