Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2017 (2017), Article ID 6849139, 7 pages
https://doi.org/10.1155/2017/6849139
Research Article

Development and Characterization of Norite-Based Cementitious Binder from an Ilmenite Mine Waste Stream

1Department of Petroleum Engineering, University of Stavanger, 4036 Stavanger, Norway
2Department of Mathematics and Natural Sciences, University of Stavanger, 4036 Stavanger, Norway

Correspondence should be addressed to Mahmoud Khalifeh; on.siu@hefilahk.duomham

Received 6 May 2017; Revised 5 July 2017; Accepted 20 July 2017; Published 23 August 2017

Academic Editor: Kedsarin Pimraksa

Copyright © 2017 Mahmoud Khalifeh et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. F. Pacheco-Torgal, J. A. Labrincha, C. Leonelli et al., Handbook of Alkali-activated Cements, Mortars and Concretes, Oxford: Woodhead Publishing, Oxford, UK, 5th edition, 2014.
  2. J. Davidovits, Geopolymer Chemistry and Application, Saint-Quentin: Institut Geopolymere, Saint-Quentin, France, 3rd edition, 2011.
  3. I. Garcia-Lodeiro, A. Fernández-Jimenez, P. Pena, and A. Palomo, “Alkaline activation of synthetic aluminosilicate glass,” Ceramics International, vol. 40, no. 4, pp. 5547–5558, 2014. View at Publisher · View at Google Scholar · View at Scopus
  4. D. L. Y. Kong, J. G. Sanjayan, and K. Sagoe-Crentsil, “Factors affecting the performance of metakaolin geopolymers exposed to elevated temperatures,” Journal of Materials Science, vol. 43, no. 3, pp. 824–831, 2008. View at Publisher · View at Google Scholar · View at Scopus
  5. E. I. Diaz, E. N. Allouche, and S. Eklund, “Factors affecting the suitability of fly ash as source material for geopolymers,” Fuel, vol. 89, no. 5, pp. 992–996, 2010. View at Publisher · View at Google Scholar · View at Scopus
  6. J. Nemecek, V. Smilauer, and L. Kopecky, “Nanoindentation characteristics of alkali-activated aluminosilicate materials,” Cement and Concrete Composites, vol. 33, pp. 163–170, 2011. View at Publisher · View at Google Scholar
  7. J. Stark, “Recent advances in the field of cement hydration and microstructure analysis,” Cement and Concrete Research, vol. 41, pp. 666–678, 2011. View at Publisher · View at Google Scholar
  8. D. Ravikumar, S. Peethamparan, and N. Neithalath, “Structure and strength of NaOH activated concretes containing fly ash or GGBFS as the sole binder,” Cement and Concrete Composites, vol. 32, no. 6, pp. 399–410, 2010. View at Publisher · View at Google Scholar · View at Scopus
  9. M. Khalifeh, A. Saasen, T. Vralstad, and H. Hodne, “Potential utilization of class C fly ash-based geopolymer in oil well cementing operations,” Cement and Concrete Composites, vol. 53, pp. 10–17, 2014. View at Publisher · View at Google Scholar · View at Scopus
  10. M. C. M. Nasvi, P. G. Ranjith, and J. Sanjayan, “The permeability of geopolymer at down-hole stress conditions: application for carbon dioxide sequestration wells,” Applied Energy, vol. 102, pp. 1391–1398, 2013. View at Publisher · View at Google Scholar · View at Scopus
  11. H. Pichler and C. Schmitt-Riegraf, Rock-Forming Minerals in Thin Section, Chapman and Hall, london, UK, 2nd edition, 1993.
  12. W. D. Nesse, Introduction to Mineralogy, Oxford University Press, Inc, Oxford, UK, 1st edition, 2000.
  13. P. I. Norkyn, Laboratory Analysis of Norite, Kronos Titania AS, 2004.
  14. A. P. Hammersley, S. O. Svensson, M. Hanfland, A. N. Fitch, and D. Häusermann, “Two-dimensional detector software: from real detector to idealised image or two-theta scan,” High Pressure Research, vol. 14, no. 4-5, pp. 235–248, 1996. View at Publisher · View at Google Scholar · View at Scopus
  15. Match!, Phase Identification from Powder Diffraction, Version 2, Crystal Impact, Dr. H. Putz and Dr. K. Brandenburg GbR, Kreuzherrenstr, 102, 53227 Bonn, Germany, http://www.crystalimpact.com/match.
  16. P. S. Deb, P. Nath, and P. K. Sarker, “The effects of ground granulated blast-furnace slag blending with fly ash and activator content on the workability and strength properties of geopolymer concrete cured at ambient temperature,” Materials & Design, vol. 62, pp. 32–39, 2014. View at Publisher · View at Google Scholar · View at Scopus
  17. P. He, D. Jia, M. Wang, and Y. Zhou, “Thermal evolution and crystallization kinetics of potassium-based geopolymer,” Ceramics International, vol. 37, no. 1, pp. 59–63, 2011. View at Publisher · View at Google Scholar
  18. M. Gougazeh and J.-C. Buhl, “Synthesis and characterization of zeolite A by hydrothermal transformation of natural Jordanian kaolin,” Journal of the Association of Arab Universities for Basic and Applied Sciences, vol. 15, no. 1, pp. 35–42, 2014. View at Publisher · View at Google Scholar · View at Scopus
  19. M. Kawano and K. Tomita, “Experimental study on the formation of clay minerals from obsidian by interaction with acid solution at 150° and 200°C,” Clays and Clay Minerals, vol. 43, no. 2, pp. 212–222, 1995. View at Publisher · View at Google Scholar · View at Scopus
  20. E. Prudhomme, P. Michaud, E. Joussein, and S. Rossignol, “Influence of raw materials and potassium and silicon concentrations on the formation of a zeolite phase in a geopolymer network during thermal treatment,” Journal of Non-Crystalline Solids, vol. 358, no. 16, pp. 1908–1916, 2012. View at Publisher · View at Google Scholar · View at Scopus
  21. Z. Yunsheng, S. Wei, C. Qianli, and C. Lin, “Synthesis and heavy metal immobilization behaviors of slag based geopolymer,” Journal of Hazardous Materials, vol. 143, no. 1-2, pp. 206–213, 2007. View at Publisher · View at Google Scholar · View at Scopus
  22. G. Mucsi, S. Kumar, B. Csoke et al., “Control of geopolymer properties by grinding of land filled fly ash,” International Journal of Mineral Processing, vol. 143, pp. 50–58, 2015. View at Publisher · View at Google Scholar · View at Scopus
  23. H. Xu, W. Gong, L. Syltebo, K. Izzo, W. Lutze, and I. L. Pegg, “Effect of blast furnace slag grades on fly ash based geopolymer waste forms,” Fuel, vol. 133, pp. 332–340, 2014. View at Publisher · View at Google Scholar · View at Scopus
  24. L. Xin, J.-Y. Xu, W. Li, and E. Bai, “Effect of alkali-activator types on the dynamic compressive deformation behavior of geopolymer concrete,” Materials Letters, vol. 124, pp. 310–312, 2014. View at Publisher · View at Google Scholar · View at Scopus
  25. G. S. Ryu, Y. B. Lee, K. T. Koh, and Y. S. Chung, “The mechanical properties of fly ash-based geopolymer concrete with alkaline activators,” Construction and Building Materials, vol. 47, pp. 409–418, 2013. View at Publisher · View at Google Scholar · View at Scopus
  26. M. Khalifeh, A. Saasen, T. Vrålstad, H. B. Larsen, and H. Hodne, “Experimental study on the synthesis and characterization of aplite rock-based geopolymers,” Journal of Sustainable Cement-Based Materials, vol. 5, no. 4, pp. 233–246, 2016. View at Publisher · View at Google Scholar · View at Scopus