Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2017, Article ID 7408641, 10 pages
https://doi.org/10.1155/2017/7408641
Research Article

Effect of Aluminum Addition on the Microstructure, Tensile Properties, and Fractography of Cast Mg-Based Alloys

1Département des Sciences Appliquées, Université du Québec à Chicoutimi, Chicoutimi, QC, Canada
2Materials Engineering, General Motors, 823 Joslyn Avenue, Pontiac, MI 48340, USA

Correspondence should be addressed to F. H. Samuel; ac.caqu@leumashf

Received 14 March 2017; Revised 2 May 2017; Accepted 6 June 2017; Published 10 August 2017

Academic Editor: Antonino Squillace

Copyright © 2017 M. H. Abdelaziz et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

M. H. Abdelaziz, M. Paradis, A. M. Samuel, H. W. Doty, and F. H. Samuel, “Effect of Aluminum Addition on the Microstructure, Tensile Properties, and Fractography of Cast Mg-Based Alloys,” Advances in Materials Science and Engineering, vol. 2017, Article ID 7408641, 10 pages, 2017. https://doi.org/10.1155/2017/7408641.