Study on the Influence of Processing Parameters on Piercing Extrusion Process of Large Diameter Cupronickel Alloy Pipes Using 3D FEM Analysis

<div>Temperature distribution of billet deformed at the piercing speed of (a) 50 mm/s, (b) 80 mm/s, and (c) 100 mm/s.</div>

Advances in Materials Science and Engineering

fig9

Figure 9

Figure 9: Study on the Influence of Processing Parameters on Piercing Extrusion Process of Large Diameter Cupronickel Alloy Pipes Using 3D FEM Analysis 

Figure 9 | Study on the Influence of Processing Parameters on Piercing Extrusion Process of Large Diameter Cupronickel Alloy Pipes Using 3D FEM Analysis 