Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2017, Article ID 8392435, 14 pages
https://doi.org/10.1155/2017/8392435
Research Article

The Role of Phosphorus Slag in Steam-Cured Concrete

School of Chemical and Environmental Engineering, China University of Mining and Technology, Beijing 100083, China

Correspondence should be addressed to Dongmin Wang; moc.361@8002-nimgnodgnaw

Received 12 March 2017; Accepted 22 March 2017; Published 24 April 2017

Academic Editor: Xiao-Jian Gao

Copyright © 2017 Jin Liu and Dongmin Wang. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. M. Kim, Q. Wang, J. Park, J. C. Cheng, H. Sohn, and C. Chang, “Automated dimensional quality assurance of full-scale precast concrete elements using laser scanning and BIM,” Automation in Construction, vol. 72, pp. 102–114, 2016. View at Publisher · View at Google Scholar
  2. Q. Wang, M. Kim, S. Yoon, J. C. Cheng, and H. Sohn, “Corrigendum to “Automated quality assessment of precast concrete elements with geometry irregularities using terrestrial laser scanning” [Autom. Constr. 68 (2016) 170–182],” Automation in Construction, vol. 74, p. 1, 2016. View at Publisher · View at Google Scholar
  3. M.-K. Kim, J. C. P. Cheng, H. Sohn, and C.-C. Chang, “A framework for dimensional and surface quality assessment of precast concrete elements using BIM and 3D laser scanning,” Automation in Construction, vol. 49, pp. 225–238, 2015. View at Publisher · View at Google Scholar · View at Scopus
  4. J. Choi, S.-K. Park, H.-Y. Kim, and S. Hong, “Behavior of high-performance mortar and concrete connections in precast concrete elements: experimental investigation under static and cyclic loadings,” Engineering Structures, vol. 100, pp. 633–644, 2015. View at Publisher · View at Google Scholar · View at Scopus
  5. Q. Wang, M. Li, and B. Zhang, “Influence of pre-curing time on the hydration of binder and the properties of concrete under steam curing condition,” Journal of Thermal Analysis and Calorimetry, vol. 118, no. 3, pp. 1505–1512, 2014. View at Publisher · View at Google Scholar · View at Scopus
  6. G. Long, M. Wang, Y. Xie, and K. Ma, “Experimental investigation on dynamic mechanical characteristics and microstructure of steam-cured concrete,” Science China Technological Sciences, vol. 57, no. 10, pp. 1902–1908, 2014. View at Publisher · View at Google Scholar · View at Scopus
  7. A. Gonzalez-Corominas, M. Etxeberria, and C. S. Poon, “Influence of steam curing on the pore structures and mechanical properties of fly-ash high performance concrete prepared with recycled aggregates,” Cement and Concrete Composites, vol. 71, pp. 77–84, 2016. View at Publisher · View at Google Scholar · View at Scopus
  8. F. Cassagnabère, G. Escadeillas, and M. Mouret, “Study of the reactivity of cement/metakaolin binders at early age for specific use in steam cured precast concrete,” Construction and Building Materials, vol. 23, no. 2, pp. 775–784, 2009. View at Publisher · View at Google Scholar · View at Scopus
  9. M. Gesoǧlu, “Influence of steam curing on the properties of concretes incorporating metakaolin and silica fume,” Materials and Structures, vol. 43, no. 8, pp. 1123–1134, 2010. View at Publisher · View at Google Scholar · View at Scopus
  10. D. W. S. Ho, C. W. Chua, and C. T. Tam, “Steam-cured concrete incorporating mineral admixtures,” Cement and Concrete Research, vol. 33, no. 4, pp. 595–601, 2003. View at Publisher · View at Google Scholar · View at Scopus
  11. E. Gallucci, X. Zhang, and K. L. Scrivener, “Effect of temperature on the microstructure of calcium silicate hydrate (C-S-H),” Cement and Concrete Research, vol. 53, no. 2, pp. 185–195, 2013. View at Publisher · View at Google Scholar · View at Scopus
  12. A. M. Ramezanianpour, K. Esmaeili, S. A. Ghahari, and A. A. Ramezanianpour, “Influence of initial steam curing and different types of mineral additives on mechanical and durability properties of self-compacting concrete,” Construction and Building Materials, vol. 73, pp. 187–194, 2014. View at Publisher · View at Google Scholar · View at Scopus
  13. C. Gu, W. Sun, L. Guo, and Q. Wang, “Effect of curing conditions on the durability of ultra-high performance concrete under flexural load,” Journal Wuhan University of Technology, Materials Science Edition, vol. 31, no. 2, pp. 278–285, 2016. View at Publisher · View at Google Scholar · View at Scopus
  14. A. C. Aydin, A. Öz, R. Polat, and H. Mindivan, “Effects of the different atmospheric steam curing processes on the properties of self-compacting-concrete containing microsilica,” Sadhana - Academy Proceedings in Engineering Sciences, vol. 40, no. 4, pp. 1361–1371, 2015. View at Publisher · View at Google Scholar · View at Scopus
  15. F. Sajedi and H. A. Razak, “Effects of curing regimes and cement fineness on the compressive strength of ordinary Portland cement mortars,” Construction and Building Materials, vol. 25, no. 4, pp. 2036–2045, 2011. View at Publisher · View at Google Scholar · View at Scopus
  16. S. J. Barnett, M. N. Soutsos, S. G. Millard, and J. H. Bungey, “Strength development of mortars containing ground granulated blast-furnace slag: Effect of curing temperature and determination of apparent activation energies,” Cement and Concrete Research, vol. 36, no. 3, pp. 434–440, 2006. View at Publisher · View at Google Scholar · View at Scopus
  17. S. Martínez-Ramírez and M. Frías, “The effect of curing temperature on white cement hydration,” Construction and Building Materials, vol. 23, no. 3, pp. 1344–1348, 2009. View at Publisher · View at Google Scholar · View at Scopus
  18. Q. Wang, M. Miao, J. Feng, and P. Yan, “The influence of hightemperature curing on the hydration characteristics of a cement-GGBS binder,” Advances in Cement Research, vol. 24, no. 1, pp. 33–40, 2012. View at Publisher · View at Google Scholar · View at Scopus
  19. S. Mengxiao, W. Qiang, and Z. Zhikai, “Comparison of the properties between high-volume fly ash concrete and high-volume steel slag concrete under temperature matching curing condition,” Construction and Building Materials, vol. 98, pp. 649–655, 2015. View at Publisher · View at Google Scholar · View at Scopus
  20. H. Fanghui, W. Qiang, L. Mutian, and M. Yingjun, “Early hydration properties of composite binder containing limestone powder with different finenesses,” Journal of Thermal Analysis and Calorimetry, vol. 123, no. 2, pp. 1141–1151, 2016. View at Publisher · View at Google Scholar · View at Scopus
  21. T. Zhang, Q. Yu, J. Wei, and J. Li, “Investigation on mechanical properties, durability and micro-structural development of steel slag blended cements,” Journal of Thermal Analysis and Calorimetry, vol. 110, no. 2, pp. 633–639, 2012. View at Publisher · View at Google Scholar · View at Scopus
  22. G. Qian, S. Bai, S. Ju, and T. Huang, “Laboratory evaluation on recycling waste phosphorus slag as the mineral filler in hot-mix asphalt,” Journal of Materials in Civil Engineering, vol. 25, no. 7, pp. 846–850, 2013. View at Publisher · View at Google Scholar · View at Scopus
  23. X.-W. Liu, L. Yang, and B. Zhang, “Utilization of phosphorus slag and fly ash for the preparation of ready-mixed mortar,” Applied Mechanics and Materials, vol. 423–426, pp. 987–992, 2013. View at Publisher · View at Google Scholar · View at Scopus
  24. Y. Peng, J. Zhang, J. Liu, J. Ke, and F. Wang, “Properties and microstructure of reactive powder concrete having a high content of phosphorous slag powder and silica fume,” Construction and Building Materials, vol. 101, pp. 482–487, 2015. View at Publisher · View at Google Scholar · View at Scopus
  25. C. Shi and J. Qian, “High performance cementing materials from industrial slags—a review,” Resources, Conservation and Recycling, vol. 29, no. 3, pp. 195–207, 2000. View at Publisher · View at Google Scholar · View at Scopus
  26. P. Gao, X. Lu, C. Yang, X. Li, N. Shi, and S. Jin, “Microstructure and pore structure of concrete mixed with superfine phosphorous slag and superplasticizer,” Construction and Building Materials, vol. 22, no. 5, pp. 837–840, 2008. View at Publisher · View at Google Scholar · View at Scopus
  27. X. Chen, L. Zeng, and K. Fang, “Anti-crack performance of phosphorus slag concrete,” Wuhan University Journal of Natural Sciences, vol. 14, no. 1, pp. 80–86, 2009. View at Publisher · View at Google Scholar · View at Scopus
  28. L. Kalina, V. Bílek, R. Novotný, M. Mončeková, J. Másilko, and J. Koplík, “Effect of Na3PO4 on the hydration process of alkali-activated blast furnace slag,” Materials, vol. 9, no. 5, article 395, 2016. View at Publisher · View at Google Scholar · View at Scopus
  29. X. Chen, K. H. Fang, H. Q. Yang, and H. Peng, “Hydration kinetics of phosphorus slag-cement paste,” Journal Wuhan University of Technology, Materials Science Edition, vol. 26, no. 1, pp. 142–146, 2011. View at Publisher · View at Google Scholar · View at Scopus
  30. L. Dong-xu, C. Lin, X. Zhong-zi, and L. Zhi-min, “A blended cement containing blast furnace slag and phosphorous slag,” Journal of Wuhan University of Technology-Mater. Sci. Ed., vol. 17, no. 2, pp. 62–65, 2002. View at Publisher · View at Google Scholar
  31. J. Feng, S. Liu, and Z. Wang, “Effects of ultrafine fly ash on the properties of high-strength concrete,” Journal of Thermal Analysis and Calorimetry, vol. 121, no. 3, pp. 1213–1223, 2015. View at Publisher · View at Google Scholar · View at Scopus
  32. S. W. Tang, X. H. Cai, Z. He, H. Y. Shao, Z. J. Li, and E. Chen, “Hydration process of fly ash blended cement pastes by impedance measurement,” Construction and Building Materials, vol. 113, pp. 939–950, 2016. View at Publisher · View at Google Scholar · View at Scopus
  33. S. K. Rao, P. Sravana, and T. C. Rao, “Abrasion resistance and mechanical properties of Roller Compacted Concrete with GGBS,” Construction and Building Materials, vol. 114, pp. 925–933, 2016. View at Publisher · View at Google Scholar · View at Scopus
  34. G. D. Moon, S. Oh, and Y. C. Choi, “Effects of the physicochemical properties of fly ash on the compressive strength of high-volume fly ash mortar,” Construction and Building Materials, vol. 124, pp. 1072–1080, 2016. View at Publisher · View at Google Scholar
  35. M.-F. Ba, C.-X. Qian, X.-J. Guo, and X.-Y. Han, “Effects of steam curing on strength and porous structure of concrete with low water/binder ratio,” Construction and Building Materials, vol. 25, no. 1, pp. 123–128, 2011. View at Publisher · View at Google Scholar · View at Scopus
  36. Y. Zhang, W. Zhang, W. She, L. Ma, and W. Zhu, “Ultrasound monitoring of setting and hardening process of ultra-high performance cementitious materials,” NDT and E International, vol. 47, pp. 177–184, 2012. View at Publisher · View at Google Scholar · View at Scopus
  37. Q. Wang, M. Li, and G. Jiang, “The difference among the effects of high-temperature curing on the early hydration properties of different cementitious systems,” Journal of Thermal Analysis and Calorimetry, vol. 118, no. 1, pp. 51–58, 2014. View at Publisher · View at Google Scholar · View at Scopus
  38. M.-F. Ba and C.-X. Qian, “Hydration evolution of pre-cast concrete with steam and water curing,” Journal of Central South University, vol. 20, no. 10, pp. 2870–2878, 2013. View at Publisher · View at Google Scholar · View at Scopus
  39. Z. He, J. Liu, and K. Zhu, “Influence of mineral admixtures on the short and long-term performance of steam-cured concrete,” in Proceedings of the International Conference on Future Energy, Environment, and Materials, FEEM 2012, pp. 836–841, China, April 2012. View at Publisher · View at Google Scholar · View at Scopus
  40. B. Lothenbach, F. Winnefeld, C. Alder, E. Wieland, and P. Lunk, “Effect of temperature on the pore solution, microstructure and hydration products of Portland cement pastes,” Cement and Concrete Research, vol. 37, no. 4, pp. 483–491, 2007. View at Publisher · View at Google Scholar · View at Scopus
  41. J.-K. Kim, S. H. Han, and Y. C. Song, “Effect of temperature and aging on the mechanical properties of concrete: part I. Experimental results,” Cement and Concrete Research, vol. 32, no. 7, pp. 1087–1094, 2002. View at Publisher · View at Google Scholar · View at Scopus
  42. R. Sarita, N. B. Singh, and N. P. Singh, “Interaction of tartaric acid during hydration of Portland cement,” Indian Journal of Chemical Technology, vol. 13, no. 5, pp. 255–261, 2006. View at Google Scholar · View at Scopus
  43. M. S. Morsy, “Effect of temperature on electrical conductivity of blended cement pastes,” Cement and Concrete Research, vol. 29, no. 4, pp. 603–606, 1999. View at Publisher · View at Google Scholar · View at Scopus
  44. Q. Wang, J. J. Feng, and P. Y. Yan, “An explanation for the negative effect of elevated temperature at early ages on the late-age strength of concrete,” Journal of Materials Science, vol. 46, no. 22, pp. 7279–7288, 2011. View at Publisher · View at Google Scholar · View at Scopus