Journals
Publish with us
Publishing partnerships
About us
Blog
Advances in Materials Science and Engineering
Journal overview
For authors
For reviewers
For editors
Table of Contents
Special Issues
Advances in Materials Science and Engineering
/
2017
/
Article
/
Fig 11
/
Research Article
Study on the Gap Flow Simulation in EDM Small Hole Machining with Ti Alloy
Figure 11
Schematics of gap flow field with flushing at 5 m/s and 3.5 mm deep hole.
(a)
Velocity field
(b)
Pressure field
(c)
Debris distribution