Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2017, Article ID 9154934, 12 pages
https://doi.org/10.1155/2017/9154934
Research Article

Estimation of Oxidation Kinetics and Oxide Scale Void Position of Ferritic-Martensitic Steels in Supercritical Water

School of Energy Power and Mechanical Engineering, North China Electric Power University, Yong Hua Bei No. 619, Lian Chi District, Baoding 071003, China

Correspondence should be addressed to Li Sun; moc.361@5131001ilnus

Received 28 March 2017; Revised 13 June 2017; Accepted 20 July 2017; Published 30 August 2017

Academic Editor: Pavel Lejcek

Copyright © 2017 Li Sun and Weiping Yan. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. P. Kritzer, “Corrosion in high-temperature and supercritical water and aqueous solutions: a review,” Journal of Supercritical Fluids, vol. 29, no. 1-2, pp. 1–29, 2004. View at Publisher · View at Google Scholar · View at Scopus
  2. R. L. Klueh and A. T. Nelson, “Ferritic/martensitic steels for next-generation reactors,” Journal of Nuclear Materials, vol. 371, no. 1-3, pp. 37–52, 2007. View at Publisher · View at Google Scholar · View at Scopus
  3. S. R. J. Saunders, M. Monteiro, and F. Rizzo, “The oxidation behaviour of metals and alloys at high temperatures in atmospheres containing water vapour: a review,” Progress in Materials Science, vol. 53, no. 5, pp. 775–837, 2008. View at Publisher · View at Google Scholar · View at Scopus
  4. W. J. Quadakkers, J. Zurek, and M. Hänsel, “Effect of water vapor on high-temperature oxidation of FeCr alloys,” JOM Journal of the Minerals Metals and Materials Society, vol. 61, no. 7, pp. 44–50, 2009. View at Publisher · View at Google Scholar · View at Scopus
  5. P. Ampornrat and G. S. Was, “Oxidation of ferritic-martensitic alloys T91, HCM12A and HT-9 in supercritical water,” Journal of Nuclear Materials, vol. 371, no. 1-3, pp. 1–17, 2007. View at Publisher · View at Google Scholar · View at Scopus
  6. I. Betova, M. Bojinov, P. Kinnunen et al., “Composition, structure, and properties of corrosion layers on ferritic and austenitic steels in ultrasupercritical water,” Journal of the Electrochemical Society, vol. 153, no. 11, Article ID 020611JES, pp. B464–B473, 2006. View at Publisher · View at Google Scholar · View at Scopus
  7. M. G. Angell, S. K. Lister, and A. Rudge, “The effect of steam pressure on the oxidation behavior of annealed 9Cr1Mo boiler tubing materials,” in Proceedings of the in 15th International Conference on the Properties of Water and Steam (ICPWS XV), pp. 1–9, Berlin, Germany, 2008.
  8. N.-Q. Zhang, H. Xu, B.-R. Li, Y. Bai, and D.-Y. Liu, “Influence of the dissolved oxygen content on corrosion of the ferritic-martensitic steel P92 in supercritical water,” Corrosion Science, vol. 56, pp. 123–128, 2012. View at Publisher · View at Google Scholar · View at Scopus
  9. L. Tan, Y. Yang, and T. R. Allen, “Oxidation behavior of iron-based alloy HCM12A exposed in supercritical water,” Corrosion Science, vol. 48, no. 10, pp. 3123–3138, 2006. View at Publisher · View at Google Scholar · View at Scopus
  10. J. Bischoff and A. T. Motta, “Oxidation behavior of ferritic-martensitic and ODS steels in supercritical water,” Journal of Nuclear Materials, vol. 424, no. 1-3, pp. 261–276, 2012. View at Publisher · View at Google Scholar · View at Scopus
  11. X. Zhong, X. Wu, and E.-H. Han, “Effects of exposure temperature and time on corrosion behavior of a ferritic-martensitic steel P92 in aerated supercritical water,” Corrosion Science, vol. 90, pp. 511–521, 2015. View at Publisher · View at Google Scholar · View at Scopus
  12. L. Martinelli, F. Balbaud-Célérier, G. Picard, and G. Santarini, “Oxidation mechanism of a Fe-9Cr-1Mo steel by liquid Pb-Bi eutectic alloy (Part III),” Corrosion Science, vol. 50, no. 9, pp. 2549–2559, 2008. View at Publisher · View at Google Scholar · View at Scopus
  13. F. Rouillard and L. Martinelli, “Corrosion of 9Cr steel in CO2 at intermediate temperature III: Modelling and simulation of void-induced duplex oxide growth,” Oxidation of Metals, vol. 77, no. 1-2, pp. 71–83, 2012. View at Publisher · View at Google Scholar · View at Scopus
  14. L. Tan, X. Ren, and T. R. Allen, “Corrosion behavior of 9-12% Cr ferritic-martensitic steels in supercritical water,” Corrosion Science, vol. 52, no. 4, pp. 1520–1528, 2010. View at Publisher · View at Google Scholar · View at Scopus
  15. L. Martinelli, F. Balbaud-Célérier, A. Terlain, S. Bosonnet, G. Picard, and G. Santarini, “Oxidation mechanism of an Fe-9Cr-1Mo steel by liquid Pb-Bi eutectic alloy at 470°C (Part II),” Corrosion Science, vol. 50, no. 9, pp. 2537–2548, 2008. View at Publisher · View at Google Scholar · View at Scopus
  16. A. Atkinson, M. L. O'Dwyer, and R. I. Taylor, “55Fe diffusion in magnetite crystals at 500°C and its relevance to oxidation of iron,” Journal of Materials Science, vol. 18, no. 8, pp. 2371–2379, 1983. View at Publisher · View at Google Scholar · View at Scopus
  17. M. Backhaus-Ricoult and R. Dieckmann, “Defects and cation diffusion in magnetite (VII): diffusion controlled formation of magnetite during reactions,” Berichte der Bunsengesellschaft für physikalische Chemie, vol. 90, no. 8, pp. 690–698, 1986. View at Publisher · View at Google Scholar
  18. J. Töpfer, S. Aggarwal, and R. Dieckmann, “Point defects and cation tracer diffusion in (CrxFe1-x)3-δO4 spinels,” Solid State Ionics, vol. 81, no. 3-4, pp. 251–266, 1995. View at Publisher · View at Google Scholar · View at Scopus
  19. P. Ampornrat, Determination of oxidation mechanisms of ferritic - martensitic steels in supercritical water, The University of Michigan, 2011.
  20. J. Zurek, M. Michalik, F. Schmitz, T.-U. Kern, L. Singheiser, and W. J. Quadakkers, “The effect of water-vapor content and gas flow rate on the oxidation mechanism of a 10%Cr-ferritic steel in Ar-H2O mixtures,” Oxidation of Metals, vol. 63, no. 5-6, pp. 401–422, 2005. View at Publisher · View at Google Scholar · View at Scopus
  21. T. Furukawa, G. Müller, G. Schumacher, A. Weisenburger, A. Heinzel, and K. Aoto, “Effect of oxygen concentration and temperature on compatibility of ODS steel with liquid, stagnant Pb45Bi55,” Journal of Nuclear Materials, vol. 335, no. 2, pp. 189–193, 2004. View at Publisher · View at Google Scholar · View at Scopus
  22. D. R. Gaskell, Introduction to Metallurgical Thermodynamics, Taylor, Francis, London, 2nd edition, 1981.
  23. T. Maruyama, N. Fukagai, M. Ueda, and K. Kawamura, “Chemical potential distribution and void formation in magnetite scale formed in oxidation of iron at 823K,” Materials Science Forum, vol. 461-464, no. II, pp. 807–814, 2004. View at Publisher · View at Google Scholar · View at Scopus
  24. I. G. Wright and P. F. Tortorelli, “Program on technology innovation: oxide growth and exfoliation on alloys exposed to steam,” Tech. Rep., Electric Power Research Institute, PaloAlto, Calif, USA, 2007. View at Google Scholar
  25. L. Tan, Y. Yang, and T. R. Allen, “Porosity prediction in supercritical water exposed ferritic/martensitic steel HCM12A,” Corrosion Science, vol. 48, no. 12, pp. 4234–4242, 2006. View at Publisher · View at Google Scholar · View at Scopus
  26. A. S. Sabau and I. G. Wright, “On the estimation of thermal strains developed during oxide growth,” Journal of Applied Physics, vol. 106, no. 2, Article ID 023503, 8 pages, 2009. View at Publisher · View at Google Scholar · View at Scopus