Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2017 (2017), Article ID 9187627, 11 pages
https://doi.org/10.1155/2017/9187627
Research Article

Influence of Chemical Admixtures on Fresh and Hardened Properties of Prolonged Mixed Concrete

1Department of Civil and Environmental Engineering, Islamic University of Technology (IUT), Gazipur 1704, Bangladesh
2Housing and Building Research Institute (HBRI), Dhaka 1216, Bangladesh
3Structural Engineers Limited (SEL), West Panthapath, Dhaka 1209, Bangladesh

Correspondence should be addressed to Tanvir Ahmed; ude.akahd-tui@dbrivnat

Received 4 July 2017; Accepted 25 October 2017; Published 17 December 2017

Academic Editor: Jose M. Monzo

Copyright © 2017 Tarek Uddin Mohammed et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. J. G. Munday, “Transportation effects on strength and consistency,” in Advanced Ready-Mix Concrete Technologies, R. K. Dhir Ed., pp. 343–353, Pergamon Press, Oxford, UK, 1976. View at Google Scholar
  2. N. P. Mailvaganam, “Factors influencing slump loss in flowing concrete,” ACI Special Publication, vol. 62, pp. 389–404, 1979. View at Google Scholar
  3. N. Ghafoori and H. Diawara, “Influence of temperature on fresh performance of self-consolidating concrete,” Construction and Building Materials, vol. 24, no. 6, pp. 946–955, 2010. View at Publisher · View at Google Scholar · View at Scopus
  4. V. Sampebulu, “Influence of high temperatures on the workability of fresh ready-mixed concrete,” ITB Journal of Engineering Science, vol. 44, no. 1, pp. 21–32, 2012. View at Publisher · View at Google Scholar · View at Scopus
  5. S. Wang, W. K. Guo, and Z. Y. Gao, “Influences of cement temperature on the performance of concrete mixed with superplasticizer,” in Advances in Engineering and Technology, L. Xie and D. Huang Eds., pp. 243–250, Taylor & Francis Group, London, UK, 2014. View at Google Scholar
  6. I. B. Topçu and Ö. Ateşin, “Effect of High Dosage Lignosulphonate and Naphthalene Sulphonate Based Plasticizer Usage on Micro Concrete Properties,” Construction and Building Materials, vol. 120, pp. 189–197, 2016. View at Publisher · View at Google Scholar
  7. T. Sugamata, T. Sugiyama, and A. Ohta, “The effects of a new high-range water-reducing agent on the improvement of rheological properties,” pp. 343–359, October 2003. View at Google Scholar
  8. A. Mardani-Aghabaglou, M. Tuyan, G. Yilmaz, Ö. Ariöz, and K. Ramyar, “Effect of different types of superplasticizer on fresh, rheological and strength properties of self-consolidating concrete,” Construction and Building Materials, vol. 47, pp. 1020–1025, 2013. View at Publisher · View at Google Scholar · View at Scopus
  9. I. Papayianni, G. Tsohos, N. Oikonomou, and P. Mavria, “Influence of superplasticizer type and mix design parameters on the performance of them in concrete mixtures,” Cement and Concrete Composites, vol. 27, no. 2, pp. 217–222, 2005. View at Publisher · View at Google Scholar · View at Scopus
  10. T. U. Mohammed and H. Hamada, “Durability of concrete made with different water-reducing chemical admixtures in tidal environment,” ACI Materials Journal, vol. 100, no. 3, pp. 194–202, 2003. View at Publisher · View at Google Scholar
  11. R. F. Adams, P. R. Stodola, and D. R. Mitchell, “Discussion of concrete retempering studies by Hawkins M. J.,” ACI Journal Proceedings, vol. 59, pp. 1249-1250, 1962. View at Google Scholar
  12. D. Ravina, “Retempering of prolonged-mixed concrete with admixtures in hot weather,” ACI Journal Proceedings, vol. 72, no. 6, pp. 291–295, 1975. View at Publisher · View at Google Scholar
  13. R. W. Previte, “Concrete slump loss,” ACI Journal Proceedings, vol. 74, no. 8, pp. 361–367, 1977. View at Publisher · View at Google Scholar
  14. D. Ravina and I. Soroka, “Slump loss and compressive strength of concrete made with WRR and HRWR admixtures and subjected to prolonged mixing,” Cement and Concrete Research, vol. 24, no. 8, pp. 1455–1462, 1994. View at Publisher · View at Google Scholar · View at Scopus
  15. A. Baskoca, M. H. Ozkul, and S. Artirma, “Effect of chemical admixtures on workability and strength properties of prolonged agitated concrete,” Cement and Concrete Research, vol. 28, no. 5, pp. 737–747, 1998. View at Publisher · View at Google Scholar
  16. T. U. Mohammed, T. Ahmed, T. A. Mallick, F. Shahriar, and A. Munim, “Influence of chemical admixtures on fresh and hardened properties of ready mix concrete,” in 1st International Conference on Engineering Research Practice, A. Rahman, F. Mashiri, M. M. Rahman, and R. Karim Eds., pp. 36–41, STAMCA, Dhaka, Bangladesh, 2017. View at Google Scholar
  17. BDS EN 197–1, Cement-Part 1: Composition, Specifications and Conformity Criteria for Common Cements, Bangladesh Standards and Testing Institution, Dhaka, Bangladesh, 2003.
  18. JSCE Guidelines for Concrete, Standard Specifications for Concrete Structures, Japan Society of Civil Engineers, Tokyo, Japan, 2007.
  19. M. R. Rixom and N. P. Mailvaganam, Chemical Admixtures for Concrete, E & FN Spon, London, UK, 3rd edition edition, 1999. View at Publisher · View at Google Scholar
  20. Bangladesh National Building Code, Housing and Building Research Institute, and Bangladesh Standards and Testing Institution, Dhaka, Bangladesh, 2006.
  21. R. Gagné, A. Boisvert, and M. Pigeon, “Effect of superplasticizer dosage on mechanical properties, permeability, and freeze-thaw durability of high-strength concretes with and without silica fume,” ACI Materials Journal, vol. 93, no. 2, pp. 111–120, 1996. View at Publisher · View at Google Scholar
  22. Y. Lin, S.-F. Kuo, C. Hsiao, and C.-P. Lai, “Investigation of pulse velocity-strength relationship of hardened concrete,” ACI Materials Journal, vol. 104, no. 4, pp. 344–350, 2007. View at Publisher · View at Google Scholar
  23. T. U. Mohammed and M. N. Rahman, “Effect of types of aggregate and sand-to-aggregate volume ratio on UPV in concrete,” Construction and Building Materials, vol. 125, pp. 832–841, 2016. View at Publisher · View at Google Scholar · View at Scopus
  24. A. M. Neville, Properties of Concrete, Pearson, London, UK, 5th edition edition, 2011.
  25. W. H. Price, “Factors influencing concrete strength,” ACI Journal Proceedings, vol. 47, no. 2, pp. 417–432, 1951. View at Publisher · View at Google Scholar