Research Article
Modeling and Analysis of the Effect of Dip-Spin Coating Process Parameters on Coating Thickness Using Factorial Design Method
Table 2
Design matrix and corresponding results.
| | | | | Replicate | Coating thickness (average ± SD) (m) | 1 | 2 | 3 |
| 900 | 20 | 100 | 10 | 4.79 | 4.80 | 4.79 | | 20 | 5.28 | 5.33 | 5.34 | | 500 | 10 | 4.69 | 4.64 | 4.56 | | 20 | 4.96 | 4.98 | 5.02 | | 25 | 100 | 10 | 5.53 | 5.30 | 5.26 | | 20 | 5.81 | 5.80 | 5.79 | | 500 | 10 | 5.21 | 5.05 | 4.99 | | 20 | 5.77 | 5.46 | 5.60 | |
| 1100 | 20 | 100 | 10 | 6.02 | 6.22 | 6.49 | | 20 | 7.27 | 7.09 | 7.26 | | 500 | 10 | 5.51 | 6.08 | 6.03 | | 20 | 6.28 | 6.38 | 6.55 | | 25 | 100 | 10 | 7.17 | 7.42 | 6.77 | | 20 | 7.88 | 7.91 | 8.18 | | 500 | 10 | 6.85 | 6.59 | 6.14 | | 20 | 7.68 | 7.61 | 7.61 | |
| 1000 | 22.5 | 300 | 15 | 6.10, 5.95, 5.95, 6.28, 6.15 | |
|
|