Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2017, Article ID 9867217, 12 pages
https://doi.org/10.1155/2017/9867217
Research Article

Effect of Temperature-Force Factors and Concentrator Shape on Impact Fracture Mechanisms of 17Mn1Si Steel

1Institute of Strength Physics and Materials Science, SB RAS, Tomsk, Russia
2National Research Tomsk Polytechnic University, Tomsk, Russia
3Ternopil Ivan Pul’uj National Technical University, Ternopil, Ukraine
4Department of Mechanical and Industrial Engineering, Norwegian University of Science and Technology, Trondheim, Norway

Correspondence should be addressed to S. V. Panin; moc.liamg@17yegresninap

Received 8 September 2016; Accepted 5 December 2016; Published 23 January 2017

Academic Editor: Yuri Ribakov

Copyright © 2017 S. V. Panin et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. S. H. Hashemi, “Apportion of Charpy energy in API 5L grade X70 pipeline steel,” International Journal of Pressure Vessels and Piping, vol. 85, no. 12, pp. 879–884, 2008. View at Publisher · View at Google Scholar · View at Scopus
  2. A. B. Arabei, I. Y. Pyshmintsev, V. M. Farber, V. A. Khotinov, and A. O. Struin, “Failure of pipe steel of X80 (K65) strength class,” Steel in Translation, vol. 42, no. 3, pp. 212–218, 2012. View at Publisher · View at Google Scholar · View at Scopus
  3. P. E. O'Donoghue, M. F. Kanninen, C. P. Leung, G. Demofonti, and S. Venzi, “The development and validation of a dynamic fracture propagation model for gas transmission pipelines,” International Journal of Pressure Vessels and Piping, vol. 70, no. 1, pp. 11–25, 1997. View at Publisher · View at Google Scholar · View at Scopus
  4. M. Ben Amara, G. Pluvinage, J. Capelle, and Z. Azari, “Crack tip opening angle as a fracture resistance parameter to describe ductile crack extension and arrest in steel pipes under service pressure,” Physical Mesomechanics, vol. 18, no. 4, pp. 355–369, 2015. View at Publisher · View at Google Scholar · View at Scopus
  5. C.-K. Oh, Y.-J. Kim, J.-H. Baek, Y.-P. Kim, and W. Kim, “A phenomenological model of ductile fracture for API X65 steel,” International Journal of Mechanical Sciences, vol. 49, no. 12, pp. 1399–1412, 2007. View at Publisher · View at Google Scholar · View at Scopus
  6. I. Y. Pyshmintsev, A. B. Arabei, V. M. Farber, V. A. Khotinov, and N. V. Lezhnin, “Laboratory criteria of crack resistance of high-strength steels for gas main pipelines,” The Physics of Metals and Metallography, vol. 113, no. 4, pp. 411–417, 2012. View at Publisher · View at Google Scholar · View at Scopus
  7. P. Maruschak, R. Bishchak, O. Prentkovskis, L. Poberezhnyi, I. Danyliuk, and G. Garbinčius, “Peculiarities of the static and dynamic failure mechanism of long-term exploited gas pipeline steel,” Advances in Mechanical Engineering, vol. 8, no. 4, pp. 1–8, 2016. View at Publisher · View at Google Scholar · View at Scopus
  8. R. W. Hertzberg, Deformation and Fracture Mechanics of Engineering Materials, John Wiley & Sons, Chichester, UK, 4th edition, 1996.
  9. ASTM E23, “Standard test methods for notched bar impact testing of metallic materials,” in Annual Book of ASTM Standards, vol. 03.01, ASTM, West Conshohocken, Pa, USA, 2016. View at Google Scholar
  10. ISO, “Metallic materials—charpy pendulum impact test—part 1: test method,” ISO 148-1:2009, International Organization for Standardization (ISO), Vernier, Geneva, Switzerland, 2009. View at Google Scholar
  11. S. H. Hashemi, “Correction factors for safe performance of API X65 pipeline steel,” International Journal of Pressure Vessels and Piping, vol. 86, no. 8, pp. 533–540, 2009. View at Publisher · View at Google Scholar · View at Scopus
  12. S. A. Kotrechko and Y. Y. Meshkov, “Physical interpretation of fracture characteristics determined in testing Charpy specimens by impact bending,” Strength of Materials, vol. 33, no. 4, pp. 356–361, 2001. View at Publisher · View at Google Scholar · View at Scopus
  13. S. H. Hashemi, D. Mohammadyani, M. Pouranvari, and S. M. Mousavizadeh, “On the relation of microstructure and impact toughness characteristics of DSAW steel of grade API X70,” Fatigue & Fracture of Engineering Materials & Structures, vol. 32, no. 1, pp. 33–40, 2009. View at Publisher · View at Google Scholar · View at Scopus
  14. P. K. C. Venkatsurya, R. D. K. Misra, M. D. Mulholland, M. Manohar, and J. E. Hartmann, “The impact of microstructure on yield strength anisotropy in linepipe steels,” Metallurgical and Materials Transactions A, vol. 45, no. 5, pp. 2335–2342, 2014. View at Publisher · View at Google Scholar · View at Scopus
  15. P. O. Maruschak, I. M. Danyliuk, R. T. Bishchak, and T. Vuherer, “Low temperature impact toughness of the main gas pipeline steel after long-term degradation,” Central European Journal of Engineering, vol. 4, no. 4, pp. 408–415, 2014. View at Publisher · View at Google Scholar · View at Scopus
  16. P. V. Yasniy, P. O. Maruschak, R. T. Bishchak, and S. V. Panin, “Degradation processes in heat resistant steel during long-term service,” in Proceedings of the International Conference “In-Service Damage of Materials, Its Diagnostics and Prediction”, pp. 196–201, TSTU, Ternopil, Ukraine, September 2009.
  17. G. C. Sih and D. Y. Tzou, “Dynamic fracture rate of Charpy V-notch specimen,” Theoretical and Applied Fracture Mechanics, vol. 5, no. 3, pp. 189–203, 1986. View at Publisher · View at Google Scholar · View at Scopus
  18. P. O. Marushchak, R. T. Bishchak, B. Gliha, and A. P. Sorochak, “Influence of temperature on the impact toughness and dynamic crack resistance of 25Kh1M1F steel,” Materials Science, vol. 46, no. 4, pp. 568–572, 2011. View at Publisher · View at Google Scholar · View at Scopus
  19. P. V. Yasnii, Y. I. Pyndus, V. B. Glad'o, I. B. Okipnyi, and I. V. Shul'gan, “Scientific and technical section FEM prediction of the influence of warm prestressing on fracture toughness of heat-resistant steel,” Strength of Materials, vol. 43, no. 2, pp. 113–121, 2011. View at Publisher · View at Google Scholar · View at Scopus
  20. D. J. Ayres, “Dynamic plastic analysis of ductile fracture—the Charpy specimen,” International Journal of Fracture, vol. 12, no. 4, pp. 567–578, 1976. View at Publisher · View at Google Scholar · View at Scopus
  21. T. R. Wilshaw and P. L. Pratt, “On the plastic deformation of charpy specimens prior to general yield,” Journal of the Mechanics and Physics of Solids, vol. 14, no. 1, pp. 7–19, 1966. View at Publisher · View at Google Scholar · View at Scopus
  22. P. O. Maruschak, A. P. Sorochak, T. Vuherer, O. Prentkovskis, O. P. Yasniy, and R. T. Bishchak, “Impact toughness and deformation parameters of fracture of railway axle material,” Arabian Journal for Science and Engineering, vol. 41, no. 5, pp. 1647–1655, 2016. View at Publisher · View at Google Scholar · View at Scopus
  23. S. O. Kotrechko, A. Y. Krasowsky, Y. Y. Meshkov, and V. M. Torop, “Long-term service effect on the toughness of pipeline steel 17GS,” International Journal of Fracture, vol. 128, no. 1, pp. 171–182, 2004. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at Scopus
  24. R. Cao, G. Li, X. Y. Fang, J. Song, and J. H. Chen, “Investigation on the effects of microstructure on the impact and fracture toughness of a C-Mn steel with various microstructures,” Materials Science and Engineering A, vol. 564, pp. 509–524, 2013. View at Publisher · View at Google Scholar · View at Scopus
  25. S. Y. Shin, “Effects of microstructure on tensile, charpy impact, and crack tip opening displacement properties of two API X80 pipeline steels,” Metallurgical and Materials Transactions A, vol. 44, no. 6, pp. 2613–2624, 2013. View at Publisher · View at Google Scholar · View at Scopus
  26. X.-L. Yang, Y.-B. Xu, X.-D. Tan, and D. Wu, “Influences of crystallography and delamination on anisotropy of Charpy impact toughness in API X100 pipeline steel,” Materials Science and Engineering A, vol. 607, pp. 53–62, 2014. View at Publisher · View at Google Scholar · View at Scopus
  27. Y. J. Chao, J. D. Ward Jr., and R. G. Sands, “Charpy impact energy, fracture toughness and ductile-brittle transition temperature of dual-phase 590 Steel,” Materials and Design, vol. 28, no. 2, pp. 551–557, 2007. View at Publisher · View at Google Scholar · View at Scopus
  28. M. W. Wu, L. C. Tsao, G. J. Shu, and B. H. Lin, “The effects of alloying elements and microstructure on the impact toughness of powder metal steels,” Materials Science and Engineering A, vol. 538, pp. 135–144, 2012. View at Publisher · View at Google Scholar · View at Scopus
  29. M. P. Savruk and A. Kazberuk, “A unified approach to problems of stress concentration near V-shaped notches with sharp and rounded tip,” International Applied Mechanics, vol. 43, no. 2, pp. 182–197, 2007. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  30. A. Kazberuk, M. P. Savruk, and A. B. Chornenkyi, “Stress distribution at sharp and rounded V-notches in quasi-orthotropic plane,” International Journal of Solids and Structures, vol. 85–86, pp. 134–143, 2015. View at Publisher · View at Google Scholar · View at Scopus
  31. P. Lazzarin and F. Berto, “Some expressions for the strain energy in a finite volume surrounding the root of blunt V-notches,” International Journal of Fracture, vol. 135, no. 1–4, pp. 161–185, 2005. View at Publisher · View at Google Scholar · View at Scopus
  32. B. Tanguy, J. Besson, R. Piques, and A. Pineau, “Ductile to brittle transition of an A508 steel characterized by Charpy impact test Part I: experimental results,” Engineering Fracture Mechanics, vol. 72, no. 1, pp. 49–72, 2005. View at Publisher · View at Google Scholar · View at Scopus
  33. B. Tanguy, J. Besson, R. Piques, and A. Pineau, “Ductile to brittle transition of an A508 steel characterized by Charpy impact test: part II: modeling of the Charpy transition curve,” Engineering Fracture Mechanics, vol. 72, no. 3, pp. 413–434, 2005. View at Publisher · View at Google Scholar · View at Scopus