Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2018, Article ID 1954573, 8 pages
https://doi.org/10.1155/2018/1954573
Research Article

Real-Time and Quantitative Measurement of Crack-Tip Stress Intensity Factors Using Digital Holographic Interferometry

1Faculty of Civil Engineering and Mechanics, Kunming University of Science and Technology, Kunming, Yunnan 650500, China
2Key Laboratory of Yunnan Province for Disaster Reduction in Civil Engineering, Kunming University of Science and Technology, Kunming, Yunnan 650500, China

Correspondence should be addressed to Rongxin Guo; nc.ude.tsumk@xroug

Received 8 December 2017; Accepted 22 March 2018; Published 16 May 2018

Academic Editor: Hiroshi Noguchi

Copyright © 2018 Haiting Xia et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. F.-G. Zhao, Y.-T. Kong, Z.-W. Xu, X. Yao, B. Zuo, and W.-S. Li, “High-performance flexible transparent conductive films achieved by cooperation between 1D copper nanowires and 2D graphene materials,” Journal of Materials Chemistry C, vol. 5, pp. 5509–5516, 2017. View at Publisher · View at Google Scholar · View at Scopus
  2. B. Yang, C. Yao, Y. Yu, Z. Li, and X. Wang, “Nature degradable, flexible, and transparent conductive substrates from green and earth-abundant materials,” Scientific Reports, vol. 7, no. 1, 2017. View at Publisher · View at Google Scholar · View at Scopus
  3. Q. Tang, H. Shen, H. Yao, Y. Jiang, C. Zheng, and K. Gao, “Preparation of silver nanowire/AZO composite film as a transparent conductive material,” Ceramics International, vol. 43, no. 1, pp. 1106–1113, 2017. View at Publisher · View at Google Scholar · View at Scopus
  4. M. Wu, D. Sun, C. Tan, X. Tian, and Y. Huang, “Al-doped ZnO monolayer as a promising transparent electrode material: a first-principles study,” Materials, vol. 10, no. 4, p. 359, 2017. View at Publisher · View at Google Scholar · View at Scopus
  5. G. Wroblewski, B. Swatowska, W. Powroznik, M. Jakubowska, and T. Stapinski, “Structural and optical properties of spray coated carbon hybrid materials applied to transparent and flexible electrodes,” Journal of Nanomaterials, vol. 2017, Article ID 3424672, 7 pages, 2017. View at Publisher · View at Google Scholar · View at Scopus
  6. M. D. S. L. Wimalananda, J.-K. Kim, and J.-M. Lee, “Toward the ultra-transparent electrode by using patterned silver nanowire and graphene layered material,” Carbon, vol. 125, pp. 9–19, 2017. View at Publisher · View at Google Scholar · View at Scopus
  7. T. Q. Trung and N.-E. Lee, “Materials and devices for transparent stretchable electronics,” Journal of Materials Chemistry C, vol. 5, no. 9, pp. 2202–2222, 2017. View at Publisher · View at Google Scholar · View at Scopus
  8. C. Yang, D. Souchay, M. Kneiβ et al., “Transparent flexible thermoelectric material based on non-toxic earth-abundant p-type copper iodide thin film,” Nature Communications, vol. 8, p. 16076, 2017. View at Publisher · View at Google Scholar · View at Scopus
  9. D. J. Kang, G. U. Park, H. Y. Park, and H.-G. Im, “A robust transparent encapsulation material: Silica nanoparticle-embedded epoxy hybrid nanocomposite,” Composites Science and Technology, vol. 144, pp. 107–113, 2017. View at Publisher · View at Google Scholar · View at Scopus
  10. T. Benitez, S. Y. Gómez, A. P. N. de Oliveira, N. Travitzky, and D. Hotza, “Transparent ceramic and glass-ceramic materials for armor applications,” Ceramics International, vol. 43, no. 16, pp. 13031–13046, 2017. View at Publisher · View at Google Scholar · View at Scopus
  11. G.-I. Shim, S.-H. Kim, D.-L. Ahn et al., “Experimental and numerical evaluation of transparent bulletproof material for enhanced impact-energy absorption using strengthened glass/polymer composite,” Composites Part B, vol. 97, pp. 150–161, 2016. View at Publisher · View at Google Scholar · View at Scopus
  12. S. Khaleghian, A. Emami, M. Tehrani, and N. Soltani, “Analysis of effective parameters for stress intensity factors in the contact problem between an asymmetric wedge and a half-plane using an experimental method of photoelasticity,” Materials and Design, vol. 43, pp. 447–453, 2013. View at Publisher · View at Google Scholar · View at Scopus
  13. M. D. Ellingsen and S. K. Khanna, “Experimental investigation of static interfacial fracture in orthotropic polymer composite bimaterials using photoelasticity,” Journal of Engineering Materials and Technology, vol. 132, no. 2, p. 021007, 2010. View at Publisher · View at Google Scholar · View at Scopus
  14. K. Ma and H. Xie, “Mixed-mode fracture investigation of PMMA with initial single/double crack(s) interference using phase-shifted coherent gradient sensing method,” Polymer Testing, vol. 59, pp. 296–307, 2017. View at Publisher · View at Google Scholar · View at Scopus
  15. K. Ma and H. Xie, “A novel phase shifting technique of coherent gradient sensing method for measuring crack-tip K-dominance,” Experimental Mechanics, vol. 57, no. 8, pp. 1239–1248, 2017. View at Publisher · View at Google Scholar · View at Scopus
  16. X. F. Yao, H. Y. Yeh, and W. Xu, “Fracture investigation at V-notch tip using coherent gradient sensing (CGS),” International Journal of Solids and Structures, vol. 43, no. 5, pp. 1189–1200, 2006. View at Publisher · View at Google Scholar · View at Scopus
  17. B. M. Sundaram and H. V. Tippur, “Dynamic mixed-mode fracture behaviors of PMMA and polycarbonate,” Engineering Fracture Mechanics, vol. 176, pp. 186–212, 2017. View at Publisher · View at Google Scholar · View at Scopus
  18. B. M. Sundaram and H. V. Tippur, “Dynamics of crack penetration vs. branching at a weak interface: an experimental study,” Journal of the Mechanics and Physics of Solids, vol. 96, pp. 312–332, 2016. View at Publisher · View at Google Scholar · View at Scopus
  19. C. Periasamy and H. V. Tippur, “Measurement of crack-tip and punch-tip transient deformations and stress intensity factors using digital gradient sensing technique,” Engineering Fracture Mechanics, vol. 98, pp. 185–199, 2013. View at Publisher · View at Google Scholar · View at Scopus
  20. S. Montrésor, P. Picart, O. Sakharuk, and L. Muravsky, “Error analysis for noise reduction in 3D deformation measurement with digital color holography,” Journal of the Optical Society of America B, vol. 34, pp. B9–B15, 2017. View at Publisher · View at Google Scholar · View at Scopus
  21. D. Khodadad, A. K. Singh, G. Pedrini, and M. Sjödahl, “Full-field 3D deformation measurement: comparison between speckle phase and displacement evaluation,” Applied Optics, vol. 55, no. 27, pp. 7735–7743, 2016. View at Publisher · View at Google Scholar · View at Scopus
  22. G. N. Oliveira, D. M. C. Rodrigues, L. C. S. Nunes, and P. A. M. dos Santos, “Digital Fourier transform holography applied to investigate mechanical deformation in polymers,” Optics and Lasers in Engineering, vol. 50, no. 12, pp. 1798–1803, 2012. View at Publisher · View at Google Scholar · View at Scopus
  23. V. Lédl, P. Psota, F. Kaván, O. Matoušek, and P. Mokrý, “Surface topography measurement by frequency sweeping digital holography,” Applied Optics, vol. 56, pp. 7808–7814, 2017. View at Publisher · View at Google Scholar · View at Scopus
  24. M. Dekiff, P. Berssenbrügge, B. Kemper, C. Denz, and D. Dirksen, “Simultaneous acquisition of 3D shape and deformation by combination of interferometric and correlation-based laser speckle metrology,” Biomedical Optics Express, vol. 6, pp. 4825–4840, 2015. View at Publisher · View at Google Scholar · View at Scopus
  25. C. Hesseling, T. Homeyer, J. Peinke, and G. Gülker, “Particle depth position detection by 2D correlation in digital in-line holography,” Optics Letters, vol. 41, no. 21, pp. 4947–4950, 2016. View at Publisher · View at Google Scholar · View at Scopus
  26. J.-M. Desse, P. Picart, and F. Olchewsky, “Quantitative phase imaging in flows with high resolution holographic diffraction grating,” Optics Express, vol. 23, no. 18, pp. 23726–23737, 2015. View at Publisher · View at Google Scholar · View at Scopus
  27. K. A. Stetson, “Effect of changing speckles in digital holography on measurements of static and vibratory displacements,” Applied Optics, vol. 55, no. 16, pp. 4485–4489, 2016. View at Publisher · View at Google Scholar · View at Scopus
  28. J. Poittevin, P. Picart, F. Gautier, and C. Pezerat, “Quality assessment of combined quantization-shot-noise-induced decorrelation noise in high-speed digital holographic metrology,” Optics Express, vol. 23, no. 24, pp. 30917–30932, 2015. View at Publisher · View at Google Scholar · View at Scopus
  29. W. J. Eldridge, A. Sheinfeld, M. T. Rinehart, and A. Wax, “Imaging deformation of adherent cells due to shear stress using quantitative phase imaging,” Optics Letters, vol. 41, no. 2, pp. 352–355, 2016. View at Publisher · View at Google Scholar · View at Scopus
  30. M. Malek, H. Khelfa, P. Picart, D. Mounier, and C. Poilâne, “Microtomography imaging of an isolated plant fiber: a digital holographic approach,” Applied Optics, vol. 55, no. 3, pp. A111–A121, 2016. View at Publisher · View at Google Scholar · View at Scopus
  31. H. Xia, R. Guo, F. Yan et al., “Simultaneous measurement of stress-optic constant and stress field of transparent plate by digital holographic interferometry,” Optik-International Journal for Light and Electron Optics, vol. 127, no. 24, pp. 11974–11981, 2016. View at Publisher · View at Google Scholar · View at Scopus
  32. H. Xia, R. Guo, Z. Fan, H. Cheng, and B. Yang, “Non-invasive mechanical measurement for transparent objects by digital holographic interferometry based on iterative least-squares phase unwrapping,” Experimental Mechanics, vol. 52, no. 4, pp. 439–445, 2012. View at Publisher · View at Google Scholar · View at Scopus
  33. R. Guo, H. Xia, Z. Fan, B. Yang, and T. He, “Research on the interaction of collective cracks with digital holography,” Laser Journal, vol. 30, pp. 38-39, 2009, in Chinese. View at Google Scholar
  34. D. C. Ghiglia and M. D. Pritt, Two-Dimensional Phase Unwrapping: Theory, Algorithms, and Software, Wiley, Hoboken, NJ, USA, 1998.
  35. S. Montresor and P. Picart, “Quantitative appraisal for noise reduction in digital holographic phase imaging,” Optics Express, vol. 24, no. 13, pp. 14322–14343, 2016. View at Publisher · View at Google Scholar · View at Scopus
  36. H. Xia, S. Montresor, R. Guo et al., “Phase calibration unwrapping algorithm for phase data corrupted by strong decorrelation speckle noise,” Optics Express, vol. 24, no. 25, pp. 28713–28730, 2016. View at Publisher · View at Google Scholar · View at Scopus
  37. S. A. Villar, S. Torcida, and G. G. Acosta, “Median filtering: a new insight,” Journal of Mathematical Imaging and Vision, vol. 58, no. 1, pp. 130–146, 2017. View at Publisher · View at Google Scholar · View at Scopus
  38. Z. N. Li, Applied Fracture Mechanics, Behang University Press, Beijing, China, 2012, in Chinese.
  39. Chinese Aeronautical Establishment, Handbook of Stress-Intensity Factors-Revised Edition, Science Press, Beijing, China, 1993, in Chinese.