Feasibility of Reduced Lap-Spliced Length in Polyethylene Fiber-Reinforced Strain-Hardening Cementitious Composite

Table 5

Experimental test results.

Specimen ID	Initial cracking		Tensile strength (MPa)	Tensile strain (%)	Average crack width at 0.1% tensile strain (μm)	Average bond strength by (1) (MPa)
	Strength (MPa)	Strain (%)
C40	95	0.008	316	0.06	89	2.69
C80	149	0.002	168	0.06	214	2.72
40P40/00	125	0.003	375	0.83	43	7.67
40P40/10	235	0.002	391	1.78	14	8.10
40P80/00	89	0.005	316	2.13	47	11.80
40P80/10	196	0.002	321	0.50	49	10.76
60P40/00	73	0.005	491	0.18	43	8.24
60P40/10	124	0.001	506	0.20	25	7.76
60P80/00	89	0.003	401	0.14	34	11.54
60P80/10	240	0.002	428	0.07	29	13.76