Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2018 (2018), Article ID 2879321, 15 pages
https://doi.org/10.1155/2018/2879321
Research Article

Assessment of Real-Time Compaction Quality Test Indexes for Rockfill Material Based on Roller Vibratory Acceleration Analysis

1State Key Laboratory of Hydraulics and Mountain River Engineering, Sichuan University, Chengdu, Sichuan 610065, China
2College of Water Resource and Hydropower, Sichuan University, Chengdu, Sichuan 610065, China

Correspondence should be addressed to Hongtao Li; nc.ude.ucs@lth

Received 25 September 2017; Revised 8 November 2017; Accepted 21 November 2017; Published 20 February 2018

Academic Editor: Antonio Gilson Barbosa de Lima

Copyright © 2018 Tianbo Hua et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. Trade Standard of P. R. China, “Specifications for rolled earth-rockfill dam construction,” Tech. Rep. DL/T 5129–2013, National Energy Administration of P. R. China, Beijing, China, 2013. View at Google Scholar
  2. H. Thurner and A. Sandstrom, “A new device for instant compaction control,” in Proceedings of the International Conference on Compaction, vol. 2, pp. 611–614, Paris, France, 1980.
  3. A. Sandstrom and J. C. Pettersson, “Intelligent systems for QA/QC in soil compaction,” in Proceedings of the 83rd Annual Transportation Research Board Meeting, Transportation Research Board, pp. 1–17, Washington, DC, USA, 2004.
  4. D. Adam, “Continuous compaction control (CCC) with vibratory rollers,” in Proceedings of the 1st Australia-Newzealand Conference on Environmental Geotechnics–GeoEnvironment, pp. 245–250, Melbourne, VIC, Australia, 1997.
  5. H. Brandl and D. Adam, “Sophisticated continuous compaction control of soils and granular materials,” in Proceedings of the 14th International Conference on Soil Mechanics and Foundation Engineering, pp. 1–6, Hamburg, Germany, 1997.
  6. D. J. White, “Report of the workshop on intelligent compaction for soils and HMA,” in Proceedings of the Workshop on Intelligent Compaction for Soils and HMA, pp. 1–129, Des Moines, IA, USA, April 2008.
  7. G. Chang, Q. W. Xu, J. Rutledge et al., Accelerated Implementation of Intelligent Compaction Technology for Embankment Subgrade Soils, Aggregate Base, and Asphalt Pavement Materials, Federal Highway Administration, Washington, DC, USA, 2011.
  8. L. Forssblad, “Compaction meter on vibrating rollers for improved compaction control,” in Proceedings of the International Conference on Compaction, vol. 2, pp. 541–546, Paris, France, 1980.
  9. L. Forssblad, Vibratory Soil and Rock FillCompaction, Swedish National Road and Transport Research Institute (VTI), Dynapac Maskin, Karlskrona, Sweden, 1981.
  10. L. Forssblad, “Roller-Mounted compaction meters,” in Proceedings of the 10th International Road Federation, pp. 1–8, RJ, Brazil, 1984.
  11. L. Forssblad, “Soil compaction and compaction control,” in Proceedings of the 3rd International Geotechnical Seminar, pp. 1–8, Singapore, 1985.
  12. H. Fujii, “Comparison of various control methods in situ,” in Proceedings of the 1st Asian-Pacific Conference of International Society Terrain-Vehicle Systems, pp. 10–18, Beijing, China, 1986.
  13. X. L. Guo and D. Wen, Field Compaction of Coarse Aggregates, China Water & Power Press, Beijing, China, 1999, (Chinese).
  14. G. Komandi, “An evaluation of the concept of rolling resistance,” Journal of Terramechanics, vol. 36, no. 3, pp. 159–166, 1999. View at Publisher · View at Google Scholar · View at Scopus
  15. D. J. White, T. D. Rupnow, and H. Ceylan, “Influence of subgrade/subbase non-uniformity on PCC pavement performance,” in Proceedings of the Geotechnical Engineering for Transportation Projects (GeoTrans2004), pp. 1058–1065, ASCE, Los Angeles, CA, USA, July 2004. View at Publisher · View at Google Scholar
  16. M. G. Bekker, Introduction to Terrain-Vehicle Systems, University of Michigan Press, Ann Arbor, MI, USA, 1969.
  17. M. J. Thompson and D. J. White, “Field calibration and spatial analysis of compaction-monitoring technology measurements,” Transportation Research Record: Journal of the Transportation Research Board, vol. 2004, pp. 69–79, 2007. View at Publisher · View at Google Scholar · View at Scopus
  18. M. J. Thompson and D. J. White, “Estimating compaction of cohesive soils from machine drive power,” Journal of Geotechnical and Geoenvironmental Engineering, vol. 134, no. 12, pp. 1771–1777, 2008. View at Publisher · View at Google Scholar · View at Scopus
  19. D. J. White and M. J. Thompson, “Relationships between in situ and roller-integrated compaction measurements for granular soils,” Journal of Geotechnical and Geoenvironmental Engineering, vol. 134, no. 12, pp. 1763–1770, 2008. View at Publisher · View at Google Scholar · View at Scopus
  20. W. Krober, R. Floss, and W. Wallrath, “Dynamic soil stiffness as quality criterion for soil compaction,” in Geotechnics for Roads, Rail Tracks and Earth Structures, pp. 189–199, Balkema, Rotterdam, Netherlands, 2001. View at Google Scholar
  21. M. A. Mooney and R. V. Rinehart, “Field monitoring of roller vibration during compaction of subgrade soil,” Journal of Geotechnical and Geoenvironmental Engineering, vol. 133, no. 3, pp. 257–265, 2007. View at Publisher · View at Google Scholar · View at Scopus
  22. R. V. Rinehart and M. A. Mooney, “Instrumentation of a roller compactor to monitor vibration behavior during earthwork compaction,” Automation in Construction, vol. 17, no. 2, pp. 144–150, 2008. View at Publisher · View at Google Scholar · View at Scopus
  23. R. Anderegg and K. Kaufmann, “Intelligent compaction with vibratory rollers: feedback control systems in automatic compaction and compaction control,” Transportation Research Record: Journal of the Transportation Research Board, vol. 1868, pp. 124–134, 2004. View at Publisher · View at Google Scholar
  24. R. Anderegg, D. A. von Felten, and K. Kaufmann, “Compaction monitoring using intelligent soil compactors,” in Proceedings of the Geotechnical Engineering in the Information Technology Age (GeoCongress2006), pp. 41–46, ASCE, Atlanta, GA, USA, April 2006. View at Publisher · View at Google Scholar · View at Scopus
  25. K. Kaufmann and R. Anderegg, “3D-construction applications : GPS-based compaction technology,” in Proceedings of the 1st International Conference on Machine Control & Guidance, pp. 1–10, Zurich, Switzerland, 2008.
  26. G. H. Xu and Y. Cai, “Dynamics monitor in the process of road structure forming,” in Proceedings of the 15th International Road Federation (IRF) World Meeting, Thailand, 2005.
  27. T. S. Yoo, A Theory for Vibratory Compaction of Soil, State University of New York at Buffalo, New York, NY, USA, 1975.
  28. E. T. Selig and T. S. Yoo, “Fundamentals of vibratory roller behavior,” in Proceedings of the 9th International Conference on Soil Mechanics and Foundation Engineering, pp. 375–380, Tokyo, Japan, 1977.
  29. T. S. Yoo and E. T. Selig, “Dynamics of vibratory-roller compaction,” Journal of the Geotechnical Engineering Division, vol. 105, no. 10, pp. 1211–1231, 1979. View at Google Scholar
  30. D. H. Zhong, B. Cui, D. H. Liu, and D. Tong, “Theoretical research on construction quality real-time monitoring and system integration of core rock-fill dam,” Science in China Series E: Technological Sciences, vol. 52, no. 11, pp. 3406–3412, 2009. View at Publisher · View at Google Scholar · View at Scopus
  31. D. H. Zhong, D. H. Liu, and B. Cui, “Real-time compaction quality monitoring of high core rockfill dam,” Science China Technological Sciences, vol. 54, no. 7, pp. 1906–1913, 2011. View at Publisher · View at Google Scholar · View at Scopus
  32. D. Liu, J. Sun, D. Zhong, and L. Song, “Compaction quality control of earth–rock dam construction using real-time field operation data,” Journal of Construction Engineering and Management, vol. 138, no. 9, pp. 1085–1094, 2012. View at Publisher · View at Google Scholar · View at Scopus
  33. D. Liu, Z. Li, and Z. Lian, “Compaction quality assessment of earth–rock dam materials using roller-integrated compaction monitoring technology,” Automation in Construction, vol. 44, pp. 234–246, 2014. View at Publisher · View at Google Scholar · View at Scopus
  34. R. B. W. Heng and M. J. M. Nor, “Statistical analysis of sound and vibration signals for monitoring rolling element bearing condition,” Applied Acoustics, vol. 53, no. 1-3, pp. 211–226, 1998. View at Publisher · View at Google Scholar
  35. Trade Standard of P. R. China, “Specification of soil test,” Tech. Rep. SL237–1999, Ministry of Water Resources of P. R. China, Beijing, China, 1999. View at Google Scholar
  36. Trade Standard of P. R. China, “Specification on rockfill dam built with gravel and soil core wall in hydroelectric and hydraulic engineering,” Tech. Rep. DL/T 5269–2012, National Energy Administration of P. R. China, Beijing, China, 2012. View at Google Scholar