Advances in Materials Science and Engineering
Volume 2018 (2018), Article ID 3063620, 14 pages
https://doi.org/10.1155/2018/3063620
Research Article
Preparation Parameter Analysis and Optimization of Sustainable Asphalt Binder Modified by Waste Rubber and Diatomite
College of Transportation, Jilin University, Changchun 130025, China
Correspondence should be addressed to Yubo Jiao; nc.ude.ulj@byoaij
Received 6 September 2017; Accepted 19 February 2018; Published 25 March 2018
Academic Editor: Estokova Adriana
Copyright © 2018 Hanbing Liu et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Linked References
- V. W. Y. Tam and C. M. Tam, “A review on the viable technology for construction waste recycling,” Resources, Conservation and Recycling, vol. 47, no. 3, pp. 209–221, 2006. View at Publisher · View at Google Scholar · View at Scopus
- M. N. Amin, M. I. Khan, and M. U. Saleem, “Performance evaluation of asphalt modified with municipal wastes for sustainable pavement construction,” Sustainability, vol. 8, no. 12, p. 949, 2016. View at Publisher · View at Google Scholar · View at Scopus
- D. L. Presti, “Recycled tyre rubber modified bitumens for road asphalt mixtures: a literature review,” Construction and Building Materials, vol. 49, pp. 863–881, 2013. View at Publisher · View at Google Scholar · View at Scopus
- M. C. Zanetti, S. Fiore, B. Ruffino, E. Santagata, D. Dalmazzo, and M. Lanotte, “Characterization of crumb rubber from end-of-life tyres for paving applications,” Waste Management, vol. 45, pp. 161–170, 2015. View at Publisher · View at Google Scholar · View at Scopus
- A. Farina, M. C. Zanetti, E. Santagata, and G. A. Blengini, “Life cycle assessment applied to bituminous mixtures containing recycled materials: crumb rubber and reclaimed asphalt pavement,” Resources, Conservation and Recycling, vol. 117, pp. 204–212, 2017. View at Publisher · View at Google Scholar · View at Scopus
- I. Bartolozzi, S. Mavridou, F. Rizzi, and M. Frey, “Life cycle thinking in sustainable supply chains: the case of rubberized asphalt pavement,” Environmental Engineering and Management Journal, vol. 14, no. 5, pp. 1203–1215, 2015. View at Google Scholar
- A. D. La Rosa, G. Recca, D. Carbone et al., “Environmental benefits of using ground tyre rubber in new pneumatic formulations: a life cycle assessment approach,” Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, vol. 229, no. 4, pp. 309–317, 2013. View at Publisher · View at Google Scholar · View at Scopus
- B. Yu, L. Jiao, F. Ni, and J. Yang, “Evaluation of plastic–rubber asphalt: engineering property and environmental concern,” Construction and Building Materials, vol. 71, pp. 416–424, 2014. View at Publisher · View at Google Scholar · View at Scopus
- F. Moreno, M. Sol, J. Martín, M. Pérez, and M. C. Rubio, “The effect of crumb rubber modifier on the resistance of asphalt mixes to plastic deformation,” Materials and Design, vol. 47, pp. 274–280, 2013. View at Publisher · View at Google Scholar · View at Scopus
- S. K. Palit, K. S. Reddy, and B. B. Pandey, “Laboratory evaluation of crumb rubber modified asphalt mixes,” Journal of Materials in Civil Engineering, vol. 16, no. 1, pp. 45–53, 2004. View at Publisher · View at Google Scholar · View at Scopus
- O. Xu, F. Xiao, S. Han, S. N. Amirkhanian, and Z. Wang, “High temperature rheological properties of crumb rubber modified asphalt binders with various modifiers,” Construction and Building Materials, vol. 112, pp. 49–58, 2016. View at Publisher · View at Google Scholar · View at Scopus
- K. L. N. N. Puga and R. C. Williams, “Low temperature performance of laboratory produced asphalt rubber (AR) mixes containing polyoctenamer,” Construction and Building Materials, vol. 112, pp. 1046–1053, 2016. View at Publisher · View at Google Scholar · View at Scopus
- T. Wang, F. Xiao, S. Amirkhanian, W. Huang, and M. Zheng, “A review on low temperature performances of rubberized asphalt materials,” Construction and Building Materials, vol. 145, pp. 483–505, 2017. View at Publisher · View at Google Scholar · View at Scopus
- P. Cong, S. Chen, and H. Chen, “Effects of diatomite on the properties of asphalt binder,” Construction and Building Materials, vol. 30, pp. 495–499, 2012. View at Publisher · View at Google Scholar · View at Scopus
- Y. Tan, Z. Lei, and X. Zhou, “Investigation of low-temperature properties of diatomite-modified asphalt mixtures,” Construction and Building Materials, vol. 36, pp. 787–795, 2012. View at Publisher · View at Google Scholar · View at Scopus
- Y. Cheng, J. Tao, Y. Jiao et al., “Influence of the properties of filler on high and medium temperature performances of asphalt mastic,” Construction and Building Materials, vol. 118, pp. 268–275, 2016. View at Publisher · View at Google Scholar · View at Scopus
- Q. Guo, L. Li, Y. Cheng, Y. Jiao, and C. Xu, “Laboratory evaluation on performance of diatomite and glass fiber compound modified asphalt mixture,” Materials and Design, vol. 66, pp. 51–59, 2015. View at Publisher · View at Google Scholar · View at Scopus
- P. Cong, N. Liu, Y. Tian, and Y. Zhang, “Effects of long-term aging on the properties of asphalt binder containing diatoms,” Construction and Building Materials, vol. 123, pp. 534–540, 2016. View at Publisher · View at Google Scholar · View at Scopus
- H. Liu, L. Fu, Y. Jiao, J. Tao, and X. Wang, “Short-term aging effect on properties of sustainable pavement asphalts modified by waste rubber and diatomite,” Sustainability, vol. 9, no. 12, p. 996, 2017. View at Publisher · View at Google Scholar · View at Scopus
- C. Fang, X. Qiao, R. Yu et al., “Influence of modification process parameters on the properties of crumb rubber/EVA modified asphalt,” Journal of Applied Polymer Science, vol. 133, no. 27, 2016. View at Publisher · View at Google Scholar · View at Scopus
- H. Yu, Z. Leng, Z. Zhou, K. Shih, F. Xiao, and Z. Gao, “Optimization of preparation procedure of liquid warm mix additive modified asphalt rubber,” Journal of Cleaner Production, vol. 141, pp. 336–345, 2017. View at Publisher · View at Google Scholar · View at Scopus
- X. Shu and B. Huang, “Recycling of waste tire rubber in asphalt and Portland cement concrete: an overview,” Construction and Building Materials, vol. 67, pp. 217–224, 2014. View at Publisher · View at Google Scholar · View at Scopus
- S. Kedarisetty, K. P. Biligiri, and J. B. Sousa, “Advanced rheological characterization of reacted and activated rubber (RAR) modified asphalt binders,” Construction and Building Materials, vol. 122, pp. 12–22, 2016. View at Publisher · View at Google Scholar · View at Scopus
- Q. Wang, S. Li, X. Wu, S. Wang, and C. Ouyang, “Weather aging resistance of different rubber modified asphalts,” Construction and Building Materials, vol. 106, pp. 443–448, 2016. View at Publisher · View at Google Scholar · View at Scopus
- J. Peralta, H. M. Silva, L. Hilliou, A. V. Machado, J. Pais, and R. C. Williams, “Mutual changes in bitumen and rubber related to the production of asphalt rubber binders,” Construction and Building Materials, vol. 36, pp. 557–565, 2012. View at Publisher · View at Google Scholar · View at Scopus
- J. C. Munera and E. A. Ossa, “Polymer modified bitumen: optimization and selection,” Materials and Design, vol. 62, pp. 91–97, 2014. View at Publisher · View at Google Scholar · View at Scopus
- L. H. Li, Road Engineering Materials, China Communications Press, Beijing, China, 5th edition, 2010.
- M. L. Huang, Y. H. Hung, and Z. S. Yang, “Validation of a method using Taguchi, response surface, neural network, and genetic algorithm,” Measurement, vol. 94, pp. 284–294, 2016. View at Publisher · View at Google Scholar · View at Scopus
- I. Kaymaz and C. A. McMahon, “A response surface method based on weighted regression for structural reliability analysis,” Probabilistic Engineering Mechanics, vol. 20, no. 1, pp. 11–17, 2005. View at Publisher · View at Google Scholar · View at Scopus
- O. Rezaifar, M. Hasanzadeh, and M. Gholhaki, “Concrete made with hybrid blends of crumb rubber and metakaolin: optimization using response surface method,” Construction and Building Materials, vol. 123, pp. 59–68, 2016. View at Publisher · View at Google Scholar · View at Scopus
- H. İ. Odabaş and I. Koca, “Application of response surface methodology for optimizing the recovery of phenolic compounds from hazelnut skin using different extraction methods,” Industrial Crops and Products, vol. 91, pp. 114–124, 2016. View at Publisher · View at Google Scholar · View at Scopus
- M. H. Esfe, H. Hajmohammad, R. Moradi, and A. A. A. Arani, “Multi-objective optimization of cost and thermal performance of double walled carbon nanotubes/water nanofluids by NSGA-II using response surface method,” Applied Thermal Engineering, vol. 112, pp. 1648–1657, 2017. View at Publisher · View at Google Scholar · View at Scopus
- Y. Song, J. Che, and Y. Zhang, “The interacting rule of diatomite and asphalt groups,” Petroleum Science and Technology, vol. 29, no. 3, pp. 254–259, 2011. View at Publisher · View at Google Scholar · View at Scopus
- Y. Cheng, J. Tao, Y. Jiao, Q. Guo, and C. Li, “Influence of diatomite and mineral powder on thermal oxidative ageing properties of asphalt,” Advances in Materials Science and Engineering, vol. 2015, Article ID 947834, 10 pages, 2015. View at Publisher · View at Google Scholar · View at Scopus
- JTG F40-2004, Technical Specifications for Construction of Highway Asphalt Pavements, Research Institute of Highway Ministry of Transport, Beijing, China, 2004, in Chinese.
- China Communications Press, Guide for Design and Construction of Asphalt Rubber and Mixtures, China Communications Press, Beijing, China, 2009, in Chinese.