Research Article
Numerical Simulation of Rock Plate Cutting with Three Sides Fixed and One Side Free
Figure 21
The cutting results with lx of 500 mm, ly of 16 mm, and lz of 200 mm for sandstone 1: (a), (c), and (e) are cutting results for θ of 5°, 10°, and 30°, respectively, and (b), (d), and (f) are the variation in cutting force for θ of 5°, 10°, and 30°, respectively.
(a) |
(b) |
(c) |
(d) |
(e) |
(f) |