Advances in Materials Science and Engineering

Advances in Materials Science and Engineering / 2018 / Article

Corrigendum | Open Access

Volume 2018 |Article ID 5630862 | https://doi.org/10.1155/2018/5630862

Marzio Grasso, Antonio De I, Yigeng Xu, George Haritos, M. Mohin, Yong K. Chen, "Corrigendum to “An Analytical Model for the Identification of the Threshold of Stress Intensity Factor Range for Crack Growth”", Advances in Materials Science and Engineering, vol. 2018, Article ID 5630862, 2 pages, 2018. https://doi.org/10.1155/2018/5630862

Corrigendum to “An Analytical Model for the Identification of the Threshold of Stress Intensity Factor Range for Crack Growth”

Received21 Nov 2017
Accepted27 Nov 2017
Published27 Feb 2018

In the article titled “An Analytical Model for the Identification of the Threshold of Stress Intensity Factor Range for Crack Growth” [1], there were minor errors in the text, referencing, and an equation.

There was an error in the Introduction, where the word “not” was missing from the sentence “This is due to the fact that the far-field cyclic compression method is not affected by the compressive yielding at the crack-starter notch and more “steady-state” constant amplitude data in near-threshold regime is achieved with this method [29].”

In addition, the cited references in the keys of Figure 6 should be corrected as follows.

Accordingly, the sentence “In Figure 6, the values of the threshold SIF predicted by the model for each curve of the five datasets analysed in this paper are shown together with the corresponding values gathered from the literature [44]” in Results and Analyses should be corrected to “In Figure 6, the values of the threshold SIF predicted by the model for each curve of the five datasets analysed in this paper are shown together with the corresponding values gathered from the literature [41, 43, 44].”

Moreover, (6) should be amended as follows:

References

  1. M. Grasso, A. De Iorio, Y. Xu, G. Haritos, M. Mohin, and Y. K. Chen, “An analytical model for the identification of the threshold of stress intensity factor range for crack growth,” Advances in Materials Science and Engineering, vol. 2017, Article ID 3014172, 13 pages, 2017. View at: Publisher Site | Google Scholar

Copyright © 2018 Marzio Grasso et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.


More related articles

 PDF Download Citation Citation
 Download other formatsMore
 Order printed copiesOrder
Views525
Downloads393
Citations

Related articles