Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2018, Article ID 5893254, 9 pages
https://doi.org/10.1155/2018/5893254
Research Article

Hydration Properties of STS-Refining Slag-Blended Blast Furnace Slag Cement

1Environment and Resources Research Group, Research Institute of Industrial Science and Technology, 67 Chengnam-ro, Nam-gu, Pohang, Republic of Korea
2Department of Civil and Environmental Engineering, Gachon University, 1342 Seongnamdaero, Sujeong-gu, Seongnam-si, Gyeonggi-do 13120, Republic of Korea

Correspondence should be addressed to Young Cheol Choi; rk.ca.nohcag@eforez

Received 24 February 2018; Revised 22 April 2018; Accepted 30 April 2018; Published 17 May 2018

Academic Editor: Fernando Rubio-Marcos

Copyright © 2018 Bong Suk Cho and Young Cheol Choi. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. E. Tazawa and S. Miyazawa, “Influence of constituents and composition on autogenous shrinkage of cementitious materials,” Magazine of Concrete Research, vol. 48, no. 1, pp. 15–22, 1997. View at Publisher · View at Google Scholar
  2. S. N. Lim and T. H. Wee, “Autogenous shrinkage of ground granulated blast furnace slag concrete,” ACI Materials Journal, vol. 97, no. 5, pp. 587–592, 2000. View at Publisher · View at Google Scholar
  3. M. Polivka, Factors Influencing Expansion of Expansive Cement Concrete, ACI, London, UK, 1972.
  4. F. M. Lea, The Chemistry of Cement and Concrete, Edward Arnold Publishers, London, UK, 3rd edition, 1976.
  5. J. L. Zhao, S. L. Shen, L. B. Wang, and J. Chen, “Modification on FIP design model for interior anchorage zones of post-tensioned concrete structures,” KSCE Journal of Civil Engineering, vol. 15, no. 3, pp. 487–495, 2011. View at Publisher · View at Google Scholar · View at Scopus
  6. B. S. Cho, H. H. Lee, and Y. C. Choi, “Effects of aluminate rich slag on compressive strength, drying shrinkage and microstructure of blast furnace slag cement,” Construction and Building Materials, vol. 140, pp. 293–300, 2017. View at Publisher · View at Google Scholar · View at Scopus
  7. Y. Xu and D. L. Chung, “Reducing the drying shrinkage of cement paste by admixture surface treatments,” Cement and Concrete Research, vol. 30, no. 2, pp. 241–245, 2000. View at Publisher · View at Google Scholar · View at Scopus
  8. C. K. Nmai, R. Romita, F. Hondo, and J. Buffenbarger, “Shrinkage reducing admixtures,” Concrete International, vol. 20, no. 4, pp. 31–37, 1998. View at Google Scholar
  9. Z. Jiang, Z. Sun, and P. Wang, “Autogenous relative humidity change and autogenous shrinkage of high-performance cement pastes,” Cement and Concrete Research, vol. 35, no. 8, pp. 1539–1545, 2005. View at Publisher · View at Google Scholar · View at Scopus
  10. W. Sun, H. S. Chen, X. Luo, and H. P. Qian, “The effect of hybrid fibers and expansive agent on the shrinkage and permeability of high-performance concrete,” Cement and Concrete Composites, vol. 31, no. 4, pp. 595–601, 2001. View at Publisher · View at Google Scholar · View at Scopus
  11. E. Özbay, M. Erdemir, and H. İ. Durmuş, “Utilization and efficiency of ground granulated blast furnace slag on concrete properties—a review,” Construction and Building Materials, vol. 105, pp. 423–434, 2016. View at Publisher · View at Google Scholar · View at Scopus
  12. M. Collepardi, A. Borsoi, S. Collepard, J. J. O. Olagot, and R. Troli, “Effects of shrinkage reducing admixture in shrinkage compensating concrete under non-wet curing conditions,” Cement and Concrete Composites, vol. 27, no. 6, pp. 704–708, 2005. View at Publisher · View at Google Scholar · View at Scopus
  13. X. Ping and J. J. Beaudoin, “Mechanism of sulphate expansion I. Thermodynamic principle of crystallization pressure,” Cement and Concrete Research, vol. 22, no. 4, pp. 631–640, 1992. View at Publisher · View at Google Scholar · View at Scopus
  14. P. K. Mehta, “Mechanism of expansion associated with ettringite formation,” Cement and Concrete Research, vol. 3, no. 1, pp. 1–6, 1973. View at Publisher · View at Google Scholar · View at Scopus
  15. V. Z. Serjun, B. Mirtic, and A. Mladenovic, “Evaluation of ladle slag as a potential material for building and civil engineering,” Materials Science and Technology, vol. 47, pp. 543–550, 2013. View at Google Scholar
  16. A. Mladenovič, B. Mirtič, A. Meden, and V. Z. Serjun, “Calcium aluminate rich secondary stainless steel slag as a supplementary cementitious material,” Construction and Building Materials, vol. 116, pp. 216–225, 2016. View at Publisher · View at Google Scholar · View at Scopus
  17. J. Montenegro, M. Celemín-Matachana, J. Cañizal, and J. Setién-Marquínez, “Ladle furnace slag in the construction of embankments: expansive behavior,” Journal of Materials in Civil Engineering, vol. 25, no. 8, pp. 972–979, 2013. View at Publisher · View at Google Scholar · View at Scopus
  18. I. Papayianni and E. Anastasiou, “Effect of granulometry on cementitious properties of ladle furnace slag,” Cement and Concrete Composites, vol. 34, no. 3, pp. 400–407, 2012. View at Publisher · View at Google Scholar · View at Scopus
  19. S. Monkman, Y. Shao, and C. Shi, “Carbonated ladle slag fines for carbon uptake and sand substitute,” Journal of Materials in Civil Engineering, vol. 21, no. 11, pp. 657–665, 2009. View at Publisher · View at Google Scholar · View at Scopus
  20. I. Papayianni and E. Anastasiou, “Optimization of ladle furnace slag for use as a supplementary cementing material,” in Measuring, Monitoring and Modeling Concrete Properties, M. S. Konsta-Gdoutos, Ed., pp. 411–417, Springer, Netherlands, 2006. View at Google Scholar
  21. J. Setién, D. Hernández, and J. J. González, “Characterization of ladle furnace basic slag for use as a construction material,” Construction and Building Materials, vol. 23, no. 5, pp. 1788–1794, 2009. View at Publisher · View at Google Scholar · View at Scopus
  22. Á. Rodriguez, J. M. Manso, Á. Aragón, and J. J. González, “Strength and workability of masonry mortars manufactured with ladle furnace slag,” Resources, Conservation and Recycling, vol. 53, no. 11, pp. 645–651, 2009. View at Publisher · View at Google Scholar · View at Scopus
  23. I. Galan, H. Beltagui, M. García-Maté, F. P. Glasser, and M. S Imbabi, “Impact of drying on pore structures in ettringite-rich cements,” Cement and Concrete Research, vol. 84, pp. 85–94, 2016. View at Publisher · View at Google Scholar · View at Scopus
  24. J. M. Manso, A. Rodriguez, A. Aragon, and J. J. González, “The durability of masonry mortars with ladle furnace slag,” Construction and Building Materials, vol. 25, no. 8, pp. 3508–3519, 2011. View at Publisher · View at Google Scholar · View at Scopus
  25. J. M. Manso, M. Losanez, J. A. Polanco, and J. J. Gonzalez, “Ladle furnace slag in construction,” Journal of Materials in Civil Engineering, vol. 17, no. 5, pp. 513–518, 2005. View at Publisher · View at Google Scholar · View at Scopus
  26. J. A. Polanco, J. M. Manso, J. Setién, and J. J. González, “Strength and durability of concrete made with electric steelmaking slag,” ACI Materials Journal, vol. 108, no. 2, pp. 196–203, 2011. View at Publisher · View at Google Scholar
  27. R. Gagné, “Expansive agents,” Science and Technology of Concrete Admixtures, P.-C. Aïtcin and R. J. Flatt, Eds., Elsevier, UK, 2016. View at Google Scholar
  28. ASTM International: ASTM C349, Standard [33] Testing Method for Length Change of Mortar and Concrete, ASTM, West Conshohocken, PA, USA, 1995.
  29. J. M. Manso, D. Hernández, M. M. Losez, and J. J. González, “Design and elaboration of concrete mixtures using steelmaking slags,” ACI Materials Journal, vol. 108, no. 6, pp. 673–681, 2011. View at Publisher · View at Google Scholar
  30. D. Adolfsson, R. Robinson, E. Engström, and B. Björkman, “Influence of mineralogy on the hydraulic properties of ladle slag,” Cement and Concrete Research, vol. 41, no. 8, pp. 865–871, 2011. View at Publisher · View at Google Scholar · View at Scopus
  31. H. Beltagui, G. Jen, M. Whittaker, and M. S. Imbabi, “The influence of variable gypsum and water content on the strength and hydration of a belite-calcium sulphoaluminate cement,” Advances in Applied Ceramics, vol. 116, no. 4, pp. 199–206, 2017. View at Publisher · View at Google Scholar · View at Scopus
  32. Y. N. Sheen, H. Y. Wang, and T. H. Sun, “A study of engineering properties of cement mortar with stainless steel oxidizing slag and reducing slag resource materials,” Construction and Building Materials, vol. 40, pp. 239–245, 2013. View at Publisher · View at Google Scholar · View at Scopus
  33. P. Sharmila and G. Dhinakaran, “Compressive strength, porosity and sorptivity of ultra-fine slag based high strength concrete,” Construction and Building Materials, vol. 120, pp. 48–53, 2016. View at Publisher · View at Google Scholar · View at Scopus
  34. E. Hamdy, A. A. Ahmed, M. S. Tarek, and E. Samir, “Hydration and characteristics metakaolin pozzolanic cement pastes,” HBRC Journal, vol. 5, 2016, In press. View at Google Scholar
  35. D. Adolfsson, R. Robinson, J. Blagojevic, and F. Su, “Assessment of ladle slag as binder alternative for cold bonded briquettes,” in REWAS 2008: Global Symposium on Recycling, B. Mishra, C. Ludwig, and S. Das, Eds., pp. 117–124, Waste Treatment, Minerals, Metals and Materials Society, USA, 2008. View at Google Scholar
  36. H. El-Didamony, S. Abd El-Aleem, and A. El-Rahman Ragab, “Hydration behavior of composite cement containing fly ash and nanosized-SiO2,” American Journal of Nano Research and Applications, vol. 3, pp. 6–16, 2016. View at Google Scholar
  37. U. Neven, U. Marko, Š. Juraj, and M. Tomislav, “XRD and TGA investigation of hardened cement paste,” in Proceedings of the Conference on Materials, Processes, Friction and Wear, pp. 243–249, Vela Luka, Croatia, June 2006.
  38. H. F. W. Taylor, Cement Chemistry, Thomas Telford, Westerkirk, UK, 2nd edition, 1997.