Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2018, Article ID 7082897, 15 pages
https://doi.org/10.1155/2018/7082897
Research Article

Optimum Design and Performance of Porous Concrete for Heavy-Load Traffic Pavement in Cold and Heavy Rainfall Region of NE China

School of Highway, Chang’an University, Xi’an 710064, China

Correspondence should be addressed to Zhao Hu; nc.ude.dhc@oahzuh

Received 8 October 2017; Revised 25 January 2018; Accepted 26 February 2018; Published 1 April 2018

Academic Editor: Charles C. Sorrell

Copyright © 2018 Ailing Yao et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. J. Judycki, “Determination of equivalent axle load factors on the basis of fatigue criteria for flexible and semi-rigid pavements,” Road Materials & Pavement Design, vol. 11, no. 1, pp. 187–201, 2010. View at Publisher · View at Google Scholar · View at Scopus
  2. J. X. Lai, K. Y. Wang, J. L. Qiu et al., “Vibration response characteristics of the cross tunnel structure,” Shock and Vibration, vol. 2016, Article ID 9524206, 16 pages, 2016. View at Publisher · View at Google Scholar · View at Scopus
  3. Z. Q. Zhang, X. Q. Shi, B. Wang, and H. Y. Li, “Stability of NATM tunnel faces in soft surrounding rocks,” Computers and Geotechnics, 2017, In press. View at Publisher · View at Google Scholar · View at Scopus
  4. R. A. Tarefder and M. Ahmad, “Evaluation of pore structure and its influence on permeability and moisture damage in asphalt concrete,” International Journal of Pavement Engineering, vol. 18, no. 3, pp. 274–283, 2015. View at Publisher · View at Google Scholar · View at Scopus
  5. J. X. Lai, H. B. Fan, J. X. Chen et al., “Blasting vibration monitoring of undercrossing railway tunnel using wireless sensor network,” International Journal of Distributed Sensor Networks, vol. 2015, Article ID 703980, 7 pages, 2015. View at Publisher · View at Google Scholar · View at Scopus
  6. J. X. Lai, J. L. Qiu, H. B. Fan et al., “Fiber bragg grating sensors-based in-situ monitoring and safety assessment of loess tunnel,” Journal of Sensors, vol. 2016, Article ID 8658290, 10 pages, 2016. View at Publisher · View at Google Scholar · View at Scopus
  7. H. J. Zhang, Z. Z. Wang, F. Lu, G. Y. Xu, and W. G. Qiu, “Analysis of the displacement increment induced by removing temporary linings and corresponding countermeasures,” Tunnelling and Underground Space Technology, vol. 73, pp. 236–243, 2018. View at Publisher · View at Google Scholar
  8. B. J. Putman and A. I. Neptune, “Comparison of test specimen preparation techniques for pervious concrete pavements,” Construction & Building Materials, vol. 25, no. 8, pp. 3480–3485, 2011. View at Publisher · View at Google Scholar · View at Scopus
  9. Q. X. Yan, H. Chen, W. Y. Chen, J. C. Zhang, and X. Huang, “Dynamic characteristic and fatigue accumulative damage of a cross shield tunnel structure under vibration load,” Shock and vibration, vol. 2018, Article ID 9525680, 14 pages, 2018. View at Publisher · View at Google Scholar
  10. Q. X. Yan, B. J. Li, Z. X. Deng, and B. Li, “Responses of shield tunnel structures with and without secondary lining,” Structural Engineering and Mechanics, 2018, In press. View at Google Scholar
  11. Z. F. Wang, S. L. Shen Jack, W. C. Cheng, and A. Arulrajah, “Simple method to predict ground displacements caused by installing horizontal jet-grouting columns,” Mathematical Problems in Engineering, vol. 2018, Article ID 1897394, 11 pages, 2018. View at Publisher · View at Google Scholar
  12. J. X. Lai, X. L. Wang, J. L. Qiu et al., “A state-of-the-art review of sustainable energy based freeze proof technology for cold-region tunnels in China,” Renewable and Sustainable Energy Reviews, vol. 82, pp. 3554–3569, 2018. View at Publisher · View at Google Scholar · View at Scopus
  13. J. X. Lai, S. Mao, J. L. Qiu et al., “Investigation progresses and applications of fractional derivative model in geotechnical engineering,” Mathematical Problems in Engineering, vol. 2016, Article ID 9183296, 15 pages, 2016. View at Publisher · View at Google Scholar · View at Scopus
  14. J. X. Lai, H. Q. Liu, J. L. Qiu, and J. X. Chen, “Settlement analysis of saturated tailings dam treated by CFG pile composite foundation,” Advances in Materials Science and Engineering, vol. 2016, Article ID 7383762, 10 pages, 2016. View at Publisher · View at Google Scholar · View at Scopus
  15. X. L. Du, L. Jin, and G. W. Ma, “Macroscopic effective mechanical properties of porous dry concrete,” Cement & Concrete Research, vol. 44, no. 1, pp. 87–96, 2013. View at Publisher · View at Google Scholar · View at Scopus
  16. J. S. Chen, C. T. Lee, and Y. Y. Lin, “Influence of engineering properties of porous asphalt concrete on long-term performance,” Journal of Materials in Civil Engineering, vol. 29, no. 4, 2017. View at Publisher · View at Google Scholar · View at Scopus
  17. J. X. Lai, H. Zhou, K. Wang et al., “Shield-driven induced ground surface and Ming Dynasty city wall settlement of Xi’an metro,” Tunnelling and Underground Space Technology, 2018, In press. View at Google Scholar
  18. J. X. Lai, S. Y. He, J. L. Qiu et al., “Characteristics of earthquake disasters and aseismic measures of tunnels in Wenchuan earthquake,” Environmental Earth Sciences, vol. 76, no. 2, pp. 76–94, 2017. View at Publisher · View at Google Scholar · View at Scopus
  19. J. San, “Strength criterion for ecological light porous concrete under multiaxial stress,” Construction & Building Materials, vol. 44, pp. 663–670, 2013. View at Publisher · View at Google Scholar · View at Scopus
  20. J. Drake, A. Bradford, and T. Van Seters, “Winter effluent quality from partial-infiltration permeable pavement systems,” Journal of Environmental Engineering, vol. 140, no. 11, 2014. View at Publisher · View at Google Scholar · View at Scopus
  21. J. X. Lai, X. L. Wang, J. L. Qiu, J. X. Chen, Z. N. Hu, and H. Wang, “Extreme deformation characteristics and countermeasures for a tunnel in difficult grounds in southern Shaanxi, China,” Environmental Earth Sciences, 2018, In press. View at Google Scholar
  22. J. X. Lai, J. L. Qiu, H. B. Fan, J. X. Chen, and Y. L. Xie, “Freeze-proof method and test verification of a cold region tunnel employing electric heat tracing,” Tunnelling and Underground Space Technology, vol. 60, pp. 56–65, 2016. View at Publisher · View at Google Scholar · View at Scopus
  23. M. L. Zheng, “Permeability coefficient and test method of porous concrete,” Journal of Traffic and Transportation Engineering, 2006. View at Google Scholar
  24. C. B. Jiang, “Study on the characteristic of pore in porous concrete,” Journal of the Chinese Ceramic Society, vol. 34, no. 4, pp. 1105–1110, 2015. View at Google Scholar
  25. Q. Yang and X. J. Wen, “Mixture design of plastic porous cement concrete for urban highway base,” Journal of Tongji University, vol. 38, no. 6, pp. 850–853, 2010. View at Publisher · View at Google Scholar · View at Scopus
  26. J. L. Qiu, H. Q. Liu, J. X. Lai, H. P. Lai, J. X. Chen, and K. Wang, “Investigating the long term settlement of a tunnel built over improved loessial foundation soil using jet grouting technique,” Journal of Performance of Constructed Facilities, 2018. View at Google Scholar
  27. X. B. Yan, C. C. Gong, S. D. Wang, and L. C. Lu, “Effect of aggregate coating thickness on pore structure features and properties of porous ecological concrete,” Magazine of Concrete Research, vol. 65, no. 16, pp. 962–969, 2013. View at Publisher · View at Google Scholar · View at Scopus
  28. JTG E42-2005, Test Methods of Aggregate for Highway Engineering, People’s Communications Press, Beijing, China, 2005.
  29. JTG E30-2005, Test Methods of Cement and Concrete for Highway Engineering, People’s Communications Press, Beijing, China, 2005.
  30. Z. F. Yang, W. Ma, W. G. Shen, and M. K. Zhou, “The aggregate gradation for the porous concrete pervious road base material,” Journal of Wuhan University of Technology-Materials Science Edition, vol. 23, no. 3, pp. 391–394, 2008. View at Publisher · View at Google Scholar · View at Scopus
  31. J. L. Qiu, Y. L. Xie, H. B. Fan, Z. C. Wang, and Y. W. Zhang, “Centrifuge modelling of twin-tunnelling induced ground movements in loess strata,” Arabian Journal of Geosciences, vol. 10, p. 493, 2017. View at Publisher · View at Google Scholar · View at Scopus
  32. J. L. Qiu, Z. C. Wang, J. X. Lai, Q. Zhang, and J. B. Wang, “Response characteristics and preventions for seismic subsidence of loess in Northwest China,” Natural Hazards, 2018. View at Google Scholar
  33. L. Q. Hu, A. M. Sha, and S. S. Zhang, “Design method of no-fines porous concrete composition based on vibration compaction,” Journal of Traffic & Transportation Engineering, vol. 12, no. 2, pp. 1–9, 2012. View at Google Scholar
  34. W. Ma, Study on the Design of Porous Concrete Pervious Base, Wuhan University of Technology, China, 2008, Ph.D. thesis.
  35. J. X. Lai, Z. H. Feng, J. L. Qiu et al., “In-situ test of grouting reinforcement for water-enriched sandy gravel ground in river floodplain,” Advances in Materials Science and Engineering, vol. 2016, Article ID 2129659, 12 pages, 2016. View at Publisher · View at Google Scholar · View at Scopus
  36. M. Valcuende, C. Parra, E. Marco et al., “Influence of limestone filler and viscosity-modifying admixture on the porous structure of self-compacting concrete,” Construction & Building Materials, vol. 28, no. 1, pp. 122–128, 2012. View at Publisher · View at Google Scholar · View at Scopus
  37. JTG E51-2009, Test Methods of Materials Stabilized with Inorganic Binders for Highway Engineering, People’s Communications Press, Beijing, China, 2009.
  38. M. L. Zheng, S. F. Chen, and B. G. Wang, “Mixture ratio design method of porous concrete based on orthogonality test,” Journal of Tongji University, vol. 34, no. 10, pp. 1319–1323, 2006. View at Google Scholar
  39. W. D. Martin, B. J. Putman, and N. B. Kaye, “Using image analysis to measure the porosity distribution of a porous pavement,” Construction & Building Material, vol. 48, pp. 210–217, 2013. View at Publisher · View at Google Scholar · View at Scopus
  40. W. Jiang, A. M. Sha, J. J. Xiao, and Z. J. Wang, “Microscopic void features and influence of porous asphalt concrete,” Journal of Tongji University, vol. 43, no. 1, pp. 67–74, 2015. View at Publisher · View at Google Scholar · View at Scopus
  41. J. J. Xiao, A. M. Sha, W. Jiang, and Z. J. Wang, “Study on the pavement performance of porous asphalt concrete,” Journal of Wuhan University of Technology, vol. 35, no. 4, pp. 49–53, 2013. View at Publisher · View at Google Scholar · View at Scopus
  42. R. Zhong and K. Wille, “Material design and characterization of high performance pervious concrete,” Construction & Building Materials, vol. 98, pp. 51–60, 2015. View at Publisher · View at Google Scholar · View at Scopus
  43. C. Lian and Y. Zhuge, “Optimum mix design of enhanced permeable concrete—an experimental investigation,” Construction & Building Materials, vol. 24, no. 12, pp. 2664–2671, 2010. View at Publisher · View at Google Scholar · View at Scopus
  44. W. Wan, Preparation of Water Permeable Ecological Concrete and Study of Its Frost Resistance, Jiangsu University, China, 2006, Ph.D. thesis.
  45. W. Jiang, A. M. Sha, J. J. Xiao, and R. Li, “Prediction model of air void content for porous asphalt concrete,” Journal of Wuhan University of Technology, vol. 33, no. 11, pp. 55–59, 2011. View at Publisher · View at Google Scholar · View at Scopus
  46. S. Hatanaka, N. Mishima, T. Nakagawa et al., “Finishing methods and compressive strength-void ratio relationships of in-situ porous concrete pavement,” Computers & Concrete, vol. 10, no. 3, pp. 231–240, 2012. View at Google Scholar
  47. X. Q. Li, Y. M. Hou, and X. Y. Gu, “Study on the effect factors of mechanical properties of porous cement concrete,” Journal of Nanjing Forestry University, vol. 32, no. 4, pp. 113–115, 2008. View at Google Scholar
  48. C. Lian, Y. Zhuge, and S. Beecham, “The relationship between porosity and strength for porous concrete,” Construction & Building Materials, vol. 25, no. 11, pp. 4294–4298, 2011. View at Publisher · View at Google Scholar · View at Scopus
  49. H. K. Kin and H. K. Lee, “Influence of cement flow and aggregate type on the mechanical and acoustic characteristics of porous concrete,” Applied Acoustics, vol. 71, no. 7, pp. 607–615, 2010. View at Publisher · View at Google Scholar · View at Scopus
  50. T. Gabet, H. Benedetto, D. Perraton et al., “French wheel tracking round robin test on a polymer modified bitumen mixture,” Materials & Structures, vol. 44, no. 6, pp. 1031–1046, 2011. View at Publisher · View at Google Scholar · View at Scopus
  51. J. Visscher and A. Vanelstraete, “Ravelling by traffic: performance testing and field validation,” International Journal of Pavement Research & Technology, vol. 10, no. 1, pp. 54–61, 2017. View at Publisher · View at Google Scholar · View at Scopus
  52. M. Bhutta, K. Tsuruta, and J. Mirza, “Evaluation of high-performance porous concrete properties,” Construction & Building Materials, vol. 31, no. 6, pp. 67–73, 2012. View at Publisher · View at Google Scholar · View at Scopus
  53. Y. P. Sheng, S. F. Chen, and H. B. Li, “Research of road performance of porous concrete with non-vibration molding,” Journal of Hebei University of Technology, vol. 36, no. 6, pp. 99–105, 2007. View at Google Scholar
  54. Y. G. Zhao, Study on Frost Resistance and Construction Control of Semi-Rigid Base, Chang’an University, Xi’an, China, 2013, Ph.D. thesis.
  55. T. Y. Sun, Study on the Structure and Material of Porous Cement Macadam Drainage Base, Chang’an University, Xi’an, China, 2013, Ph.D. thesis.
  56. W. H. Zhou, H. Y. Qin, J. L. Qiu et al., “Building information modelling review with potential applications in tunnel engineering of China,” Royal Society Open Science, vol. 4, no. 8, 2017. View at Publisher · View at Google Scholar · View at Scopus
  57. G. Al-Assadi, M. J. Casati, J. Fernandez, and J. C. Galvez, “Effect of the curing conditions of concrete on the behaviour under freeze–thaw cycles,” Fatigue & Fracture of Engineering Materials & Structures, vol. 34, no. 7, pp. 461–469, 2011. View at Publisher · View at Google Scholar · View at Scopus
  58. Y. W. Zhang, J. X. Lai, and Y. L. Xie, “Modelling spatial and temporal characteristics of FHF in a cold region tunnel,” Journal of Cold Regions Engineering, 2018, In press. View at Google Scholar
  59. M. L. Zheng, S. F. Chen, and B. G. Wang, “Study on the shrinkage character of porous concrete,” Journal of Xi’an University of Architecture & Technology, vol. 37, no. 4, pp. 483–487, 2005. View at Google Scholar
  60. J. L. Qiu, X. L. Wang, S. He et al., “The catastrophic landside in Maoxian County, Sichuan, SW China, on June 24, 2017,” Natural Hazards, vol. 3, no. 1-9, 2017. View at Publisher · View at Google Scholar · View at Scopus
  61. W. C. Cheng, J. C. Ni, A. Arulrajah, and H. W. Huang, “A simple approach for characterising tunnel bore conditions based upon pipe jacking data,” Tunnelling and Underground Space Technology, vol. 71, pp. 494–504, 2018. View at Publisher · View at Google Scholar
  62. Z. F. Wang, X. Bian, and Y. Q. Wang, “Numerical approach to predict ground displacement caused by installing a horizontal jet grout column,” Marine Georesources and Geotechnology, vol. 35, no. 7, pp. 970–977, 2017. View at Publisher · View at Google Scholar · View at Scopus
  63. Y. Li, Y. Yang, H. Yu, and G. Roberts, “Principal stress rotation under bidirectional simple shear loadings,” KSCE Journal of Civil Engineering, vol. 1, no. 1–10, 2018. View at Publisher · View at Google Scholar · View at Scopus
  64. X. Z. Li, C. Z. Qi, and Z. S. Shao, “A microcrack growth-based constitutive model for evaluating transient shear properties during brittle creep of rocks,” Engineering Fracture Mechanics, vol. 194, pp. 9–23, 2018. View at Publisher · View at Google Scholar