Review Article
A Review on Superplastic Formation Behavior of Al Alloys
Table 3
Deformation conditions of optimal superplastic elongation of Al alloys.
| Al alloys (wt.%) | Temperature (°C) | Strain rate (s−1) | Elongation (%) | Reference |
| Al-5.2Mg-2.1Li-0.12Zr | 525 | 0.001 | 915 | [58] | Al-Mg-0.15Sc-0.10Zr | 475 | 0.05 | 1579 | [41] | Al-6.1Mg-0.25Sc-0.1Zr | 500 | 0.05 | 3200 | [69] | Al-5.8Mg-0.4Mn-0.25Sc-0.1Zr | 500 | 0.00667 | 740 | [43] | Al-5.3Mg-2.1Li-0.11Zr | 475 | 0.0008 | 1050 | [55] | Al-5Mg-0.2Sc | 520 | 0.056 | 2300 | [88] | Al-3Mg-0.2Sc | 400 | 0.033 | 2280 | [89] | Al-3.8Cu-1.4Li(2A97) | 490 | 0.002 | 850 | [76] | Al-5.85Zn-2.56Mg-1.89Cu | 535 | 0.01 | 3250 | [86] | Al-6Zn-2.3Mg-1.7Cu(7B04) | 530 | 0.0003 | 1105 | [52] | Al-5.6Zn-2.2Mg-1.5Cu(7475) | 515 | 0.0005 | 590 | [46] | Al-5.41Zn-1.9Mg-0.25Sc-0.1Zr | 500 | 0.01 | 1523 | [76] | Al-5.36Zn-1.9Mg-0.1Sc-0.1Zr | 500 | 0.005 | 1050 | [56] | Al-5.4Zn-2Mg-0.25Sc-0.1Zr | 200 | 0.01 | 539 | [57] |
|
|