Research Article
Computer Numerical Controlled Grinding and Physical Vapor Deposition for Fused Deposition Modelled Workpieces
Table 2
Roughness values and comparison between row and treated part.
| Test piece | Side | Row part roughness (μm) | Standard deviation row part roughness (μm) | Milling machined part roughness (μm) | Standard deviation milling machined part roughness (μm) | Metal-coated part roughness (μm) | Standard deviation metal-coated part roughness (μm) | Roughness total reduction (μm) | Roughness total reduction (%) |
| A | A | 18.80 | 0.8 | 3.66 | 0.07 | 1.37 | 0.52 | 17.42 | 92.71 | B | 18.99 | 0.96 | 3.47 | 1.85 | 1.77 | 1.4 | 17.22 | 90.68 | C | 19.33 | 0.24 | 2.00 | 0.55 | 0.73 | 0.35 | 18.60 | 96.22 | D | 20.28 | 6.75 | 4.63 | 1.48 | 1.80 | 1.1 | 15.64 | 91.12 |
| B | A | 18.93 | 0.38 | x | x | 0.6 | 0.30 | 18.33 | 96.83 | B | 21.59 | 3.66 | x | x | 0.91 | 0.64 | 20.68 | 95.78 | C | 19.75 | 0.89 | x | x | 0.75 | 0.33 | 19.00 | 96.20 | D | 19.85 | 0.85 | x | x | 1.09 | 0.39 | 18.76 | 94.5 |
|
|
x: the results of machinings performed by FORTEX.
|