Advances in Materials Science and Engineering

Poole–Frenkel Emission Saturation and Its Effects on Time-to-Failure in Ta-Ta₂O₅-MnO₂ Capacitors

The Mechanical Properties of Recycled Coarse Aggregate Concrete with Lithium Slag

Advances in Modelling of Heat and Mass Transfer in Porous Materials

Effects of Continuous Laydown and Compaction on Interlayer Shear Bonding of Asphalt Layers

Durability of GFRC Modified by Calcium Sulfoaluminate Cement under Elevated Curing Temperatures

Automatic Roadway Backfilling of Caving Gangue for Cutting Roofs by Combined Support on Gob-Side Entry Retaining with No-Pillars: A Case Study

Deformation Caused by Dynamic Load and Support Requirements in a Deep Gob-Side Entry Rock Mass

Analysis of Strength Factors of Steel Cord Conveyor Belt Splices Based on the FEM

Force and Deformation Characteristics during the Reconstruction and Expansion of Shallow Single-Tube Tunnels into Large-Span Multiarch Tunnels

Chloride Penetration in Coastal Concrete Structures: Field Investigation and Model Development

Experimental Study on Manufactured Sand-Soil Bearing Capacity W-T-BC Model Based on Mechanical Response of Rotary Penetration

Experimental Evaluation of the Influences of Water on the Fracture Toughness of Mudstones with Bedding

The Application of Hyaluronic Acid-Based Hydrogels in Bone and Cartilage Tissue Engineering

Influence of Existing Defects on Mechanical Properties of NC Lining

Hot Deformation Behavior and Microstructural Evolution of Twin-Roll-Casting Mg Alloy during High-Temperature Compression

Advances in Materials Science and Engineering

Table of Contents

Table of Contents: 2019

Poole–Frenkel Emission Saturation and Its Effects on Time-to-Failure in Ta-Ta₂O₅-MnO₂ Capacitors

The Mechanical Properties of Recycled Coarse Aggregate Concrete with Lithium Slag

Advances in Modelling of Heat and Mass Transfer in Porous Materials

Effects of Continuous Laydown and Compaction on Interlayer Shear Bonding of Asphalt Layers

Durability of GFRC Modified by Calcium Sulfoaluminate Cement under Elevated Curing Temperatures

Automatic Roadway Backfilling of Caving Gangue for Cutting Roofs by Combined Support on Gob-Side Entry Retaining with No-Pillars: A Case Study

Deformation Caused by Dynamic Load and Support Requirements in a Deep Gob-Side Entry Rock Mass

Analysis of Strength Factors of Steel Cord Conveyor Belt Splices Based on the FEM

Force and Deformation Characteristics during the Reconstruction and Expansion of Shallow Single-Tube Tunnels into Large-Span Multiarch Tunnels

Chloride Penetration in Coastal Concrete Structures: Field Investigation and Model Development

Experimental Study on Manufactured Sand-Soil Bearing Capacity W-T-BC Model Based on Mechanical Response of Rotary Penetration

Experimental Evaluation of the Influences of Water on the Fracture Toughness of Mudstones with Bedding

The Application of Hyaluronic Acid-Based Hydrogels in Bone and Cartilage Tissue Engineering

Influence of Existing Defects on Mechanical Properties of NC Lining

Hot Deformation Behavior and Microstructural Evolution of Twin-Roll-Casting Mg Alloy during High-Temperature Compression

Advances in Materials Science and Engineering

Table of Contents

Table of Contents: 2019

Poole–Frenkel Emission Saturation and Its Effects on Time-to-Failure in Ta-Ta2O5-MnO2 Capacitors

The Mechanical Properties of Recycled Coarse Aggregate Concrete with Lithium Slag

Advances in Modelling of Heat and Mass Transfer in Porous Materials

Effects of Continuous Laydown and Compaction on Interlayer Shear Bonding of Asphalt Layers

Durability of GFRC Modified by Calcium Sulfoaluminate Cement under Elevated Curing Temperatures

Automatic Roadway Backfilling of Caving Gangue for Cutting Roofs by Combined Support on Gob-Side Entry Retaining with No-Pillars: A Case Study

Deformation Caused by Dynamic Load and Support Requirements in a Deep Gob-Side Entry Rock Mass

Analysis of Strength Factors of Steel Cord Conveyor Belt Splices Based on the FEM

Force and Deformation Characteristics during the Reconstruction and Expansion of Shallow Single-Tube Tunnels into Large-Span Multiarch Tunnels

Chloride Penetration in Coastal Concrete Structures: Field Investigation and Model Development

Experimental Study on Manufactured Sand-Soil Bearing Capacity W-T-BC Model Based on Mechanical Response of Rotary Penetration

Experimental Evaluation of the Influences of Water on the Fracture Toughness of Mudstones with Bedding

The Application of Hyaluronic Acid-Based Hydrogels in Bone and Cartilage Tissue Engineering

Influence of Existing Defects on Mechanical Properties of NC Lining

Hot Deformation Behavior and Microstructural Evolution of Twin-Roll-Casting Mg Alloy during High-Temperature Compression

Poole–Frenkel Emission Saturation and Its Effects on Time-to-Failure in Ta-Ta₂O₅-MnO₂ Capacitors